EN 14915:2006

Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking

This European Standard defines and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for products (including sidings) used in solid wood panelling and cladding for:
   wall and ceiling panelling for internal use;
   wall and ceiling cladding for external uses.
It provides for the evaluation of conformity and the requirements for marking these products.
The products are not evaluated for stiffening functions.
This European Standard covers treated as well as untreated wood and it covers finger jointed and edge glued products.
This European Standard covers products in compliance with EN 14519, EN 14951 and prEN 15146 but it also covers other solid timber products suitable for panelling and cladding.
This European Standard does not cover products which are produced from laminated layer section.

Wand- und Deckenbekleidung aus Massivholz im Innen- und Außenbereich - Eingenschaften, Bewertung der Konformität und Kennzeichnung

Diese Europäische Norm legt die wesentlichen Eigenschaften für Wand- und Deckenbekleidungen aus Massivholz sowie die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest für:
¾ Wand- und Deckenbekleidungen zur Verwendung im Innenbereich;
¾ seitliche Wandbekleidungen zur Verwendung im Innenbereich;
¾ seitliche Wandbekleidungen zur Verwendung im Außenbereich;
¾ Wand- und Deckenbekleidungen zur Verwendung im Außenbereich.
Sie legt die Bewertung der Konformität und die Anforderungen für die Kennzeichnung dieser Produkte fest.
Die Produkte sind nicht für Versteifungszwecke vorgesehen. Sie sind abhängig von Konstruktionssystem und von der Endanwendung.
Diese Norm gilt für behandeltes und unbehandeltes Holz.
ANMERKUNG   Die jeweiligen Produkte sind in prEN 14519, EN (175.339.02) und EN (175.339.03) festgelegt.

Lambris et bardages en bois - Caractéristiques, évaluation de conformité et marquage

La présente Norme Européenne définit et spécifie les caractéristiques pertinentes ainsi que les méthodes
d’essais appropriées pour déterminer ces caractéristiques des produits utilisés pour la réalisation de lambris
et bardages en bois massif utilisés en :
-  lambris de mur et de plafonds pour usage intérieur ;
-  bardages de mur et de plafond pour usage extérieur.
Elle traite de l’évaluation de la conformité et des exigences concernant le marquage de ces produits.
Les fonctions de rigidité des produits ne sont pas évaluées.
La présente Norme Européenne s’applique aux bois traités et aux bois non traités et s’applique aux produits
aboutés et collés sur chant.
La présente Norme Européenne s’applique aux produits conformes à l’EN 14519, et aux prEN 15146 et
prEN 14951 mais également aux autres produits en bois massif adaptés à la réalisation de lambris et
bardages.
La présente Norme Européenne ne s’applique pas aux produits qui proviennent de section lamellée.

Notranje in zunanje obloge iz masivnega lesa - Lastnosti, ovrednotenje skladnosti in označevanje

General Information

• Status: Withdrawn
• Publication Date: 22-Aug-2006
• Withdrawal Date: 24-Sep-2013
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175 - Round and sawn timber
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 25-Sep-2013
• Completion Date: 25-Sep-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Ref Project: SIST EN 14915:2007 - Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking

Relations

• Replaced By: EN 14915:2013 - Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
• Effective Date: 02-Oct-2013
• Corrected By: EN 14915:2006/AC:2007 - Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Solid wood panelling and cladding - Characteristics, evaluation of conformity and markingLambris et bardages en bois - Caractéristiques, évaluation de conformité et marquageWand- und Deckenbekleidung aus Massivholz im Innen- und Außenbereich - Eingenschaften, Bewertung der Konformität und KennzeichnungTa slovenski standard je istoveten z:EN 14915:2006SIST EN 14915:2007en79.080Polizdelki iz lesaSemi-manufactures of timberICS:SLOVENSKI
STANDARDSIST EN 14915:200701-marec-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14915August 2006ICS 79.080 English VersionSolid wood panelling and cladding - Characteristics, evaluationof conformity and markingLambris et bardages en bois - Caractéristiques, évaluationde conformité et marquageWand- und Deckenbekleidung aus Massivholz im Innen-und Außenbereich - Eingenschaften, Bewertung derKonformität und KennzeichnungThis European Standard was approved by CEN on 24 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14915:2006: E

Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Characteristics for internal and external wall and ceiling.5 4.1 General.5 4.2 Characteristics for solid wood panelling for use on internal walls and ceilings.5 4.3 Characteristics for solid wood sidings for use on internal walls.6 4.4 Characteristics for solid wood sidings for use on external walls.6 4.5 Characteristics for solid wood cladding for use on external walls and ceilings.6 4.6 Durability against biological attack.6 4.6.1 Natural durability.6 4.6.2 Timber treated against biological attack.6 5 Determination of the characteristics.7 5.1 Reaction to fire.7 5.2 Release of formaldehyde.9 5.3 Content of pentachlorophenol.10 5.4 Water vapour permeability.10 5.5 Sound absorption.10 5.6 Thermal conductivity.10 6 Evaluation of conformity.11 6.1 General.11 6.2 Initial type testing or assessment.11 6.3 Factory production control (FPC).12 6.3.1 General.12 6.3.2 Procedures when control criteria are not met.12 6.3.3 Record of documentation.12 6.3.4 FPC testing.12 7 Marking.14 Annex A (normative)
Simplified encoding system for solid wood panelling and cladding.15 Annex B (informative)
General consideration regarding durability of wood.16 B.1 General precautions (based on EN 335-2:1992, Annex A).16 B.2 Natural or conferred durability of solid wood (extract from EN 335-2:1992,
Annex A).16 B.3 Construction.17 Annex C (normative)
Formaldehyde classes.18 C.1 General.18 C.2 Panelling and cladding to be tested.18 C.3 Materials to be tested.18 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.20 ZA.1 Scope and relevant characteristics.20 ZA.2 Procedure for the attestation of conformity of solid wood panelling and cladding.21 ZA.2.1 Systems of attestation of conformity.21 ZA.2.2 EC Certificate and Declaration of conformity.23 ZA.3 CE marking and labelling.25 Bibliography.28

EN 1309-1:1997 and the following apply. 3.1 siding material attached to interior or exterior of the building wall where length predominates the other two dimensions, having reduced thickness NOTE North American term synonymous with wall panelling and cladding 3.2 assembled test specimen products put together, according to their method of assembly as given by the manufacturer (e.g. joined tongue to groove), to form a panelling or cladding assembly for the purpose of testing 4 Characteristics for internal and external wall and ceiling 4.1 General Characteristics shall be assessed and declared when subject to regulatory requirements and may be assessed and declared when not subject to such requirements. 4.2 Characteristics for solid wood panelling for use on internal walls and ceilings The following characteristics shall be determined:  reaction to fire: see 5
...