EN ISO 3248:2016
(Main)Paints and varnishes - Determination of the effect of heat (ISO 3248:2016)
Paints and varnishes - Determination of the effect of heat (ISO 3248:2016)
ISO 3248:2016 specifies a method for determining the resistance of single coatings or multi-coat systems of paints, varnishes or related products to changes in gloss and/or colour, blistering, cracking and/or detachment from the substrate under conditions of a specified temperature.
This procedure is applicable to products intended for use on domestic radiators or other articles likely to be subjected to similar temperatures.
Beschichtungsstoffe - Bestimmung der Auswirkung von Wärme (ISO 3248:2016)
Diese Internationale Norm legt ein Verfahren zum Bestimmen der Beständigkeit einzelner Schichten oder eines Mehrschichtsystems aus Lacken, Anstrichstoffen und ähnlichen Beschichtungsstoffen gegen Änderung von Glanz und/oder Farbe, Blasenbildung, Rissbildung und/oder Ablösen vom Substrat bei einer festgelegten Temperatur fest.
Dieses Verfahren ist für Heizkörper im Wohnbereich oder andere Gegenstände anwendbar, die ähnlichen Temperaturen ausgesetzt sind.
Peintures et vernis - Détermination des effets de la chaleur (ISO 3248:2016)
L'ISO 3248 :2016 prescrit une méthode pour déterminer la résistance des couches uniques ou des systèmes multicouches de peintures, de vernis ou de produits assimilés au changement de brillant et/ou de couleur, au cloquage, au craquelage et/ou au décollement de leur subjectile dans des conditions d'exposition à une température spécifiée.
La méthode est applicable aux produits destinés à être utilisés sur des radiateurs à usage domestique ou sur d'autres articles susceptibles d'être exposés à des températures similaires.
Barve in laki - Ugotavljanje vpliva toplote (ISO 3248:2016)
Ta mednarodni standard določa metodo za ugotavljanje odpornosti enopokrivnih ali večpokrivnih sistemov barv, lakov ali sorodnih izdelkov na spremembe v sijaju in/ali barvi, mehurjenje, pokanje in/ali odstop od podlage pod pogoji določene temperature.
Ta postopek se uporablja za proizvode, namenjene za uporabo na radiatorjih za domačo uporabo ali drugih izdelkih, za katere obstaja verjetnost, da bodo izpostavljeni podobnim temperaturam.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2016
1DGRPHãþD
SIST EN ISO 3248:2001
Barve in laki - Ugotavljanje vpliva toplote (ISO 3248:2016)
Paints and varnishes - Determination of the effect of heat (ISO 3248:2016)
Beschichtungsstoffe - Bestimmung der Auswirkung von Wärme (ISO 3248:2016)
Peintures et vernis - Détermination des effets de la chaleur (ISO 3248:2016)
Ta slovenski standard je istoveten z: EN ISO 3248:2016
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 3248
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2016
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 3248:2000
English Version
Paints and varnishes - Determination of the effect of heat
(ISO 3248:2016)
Peintures et vernis - Détermination des effets de la Beschichtungsstoffe - Bestimmung der Auswirkung
chaleur (ISO 3248:2016) von Wärme (ISO 3248:2016)
This European Standard was approved by CEN on 8 July 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3248:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 3248:2016) has been prepared by Technical Committee ISO/TC 35 “Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2017, and conflicting national standards
shall be withdrawn at the latest by February 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 3248:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3248:2016 has been approved by CEN as EN ISO 3248:2016 without any modification.
INTERNATIONAL ISO
STANDARD 3248
Third edition
2016-08-01
Paints and varnishes — Determination
of the effect of heat
Peintures et vernis — Détermination des effets de la chaleur
Reference number
ISO 3248:2016(E)
©
ISO 2016
ISO 3248:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 3248:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Limitations . 1
5 Sampling . 2
6 Test panels . 2
6.1 Substrate . 2
6.2 Preparation and coating . . 2
6.3 Drying and conditioning . 2
6.4 Thickness of coating . 2
7 Procedure. 2
7.1 Temperature and duration of the test . 2
7.2 Determination . 2
8 Precision . 3
9 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.