EN ISO 6507-4:2018
(Main)Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
ISO 6507-4:2018 gives tables of Vickers hardness for use in tests carried out in accordance with ISO 6507‑1.
Metallische Werkstoffe - Härteprüfung nach Vickers - Teil 4: Tabellen zur Bestimmung der Härtewerte (ISO 6507-4:2018)
Dieses Dokument enthält Tabellen zur Bestimmung der Vickers Härte bei der Prüfung nach ISO 6507-1.
Matériaux métalliques - Essai de dureté Vickers - Partie 4: Tableaux de valeurs de dureté (ISO 6507-4:2018)
ISO 6507-4:2018 donne des tableaux de dureté Vickers pour les essais réalisés sur surface plane conformément à l'ISO 6507-1.
Kovinski materiali - Preskus trdote po Vickersu - 4. del: Tabela za določanje trdote (ISO 6507-4:2018)
V tem dokumentu so podane tabele trdote po Vickersu, ki se uporabljajo pri preskusih, skladnih s standardom ISO 6507-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6507-4:2018
01-julij-2018
1DGRPHãþD
SIST EN ISO 6507-4:2006
.RYLQVNLPDWHULDOL3UHVNXVWUGRWHSR9LFNHUVXGHO 7DEHOD]DGRORþDQMHWUGRWH
,62
Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO
6507-4:2018)
Metallische Werkstoffe - Härteprüfung nach Vickers - Teil 4: Tabellen zur Bestimmung
der Härtewerte (ISO 6507-4:2018)
Matériaux métalliques - Essai de dureté Vickers - Partie 4: Tableaux des valeurs de
dureté (ISO 6507-4:2018)
Ta slovenski standard je istoveten z: EN ISO 6507-4:2018
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 6507-4:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6507-4:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 6507-4:2018
EN ISO 6507-4
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 77.040.10 Supersedes EN ISO 6507-4:2005
English Version
Metallic materials - Vickers hardness test - Part 4: Tables
of hardness values (ISO 6507-4:2018)
Matériaux métalliques - Essai de dureté Vickers - Partie Metallische Werkstoffe - Härteprüfung nach Vickers -
4: Tableaux de valeurs de dureté (ISO 6507-4:2018) Teil 4: Tabellen zur Bestimmung der Härtewerte (ISO
6507-4:2018)
This European Standard was approved by CEN on 18 January 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6507-4:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6507-4:2018
EN ISO 6507-4:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6507-4:2018
EN ISO 6507-4:2018 (E)
European foreword
This document (EN ISO 6507-4:2018) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee ECISS/TC 101 “Test methods
for steel (other than chemical analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6507-4:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 6507-4:2018 has been approved by CEN as EN ISO 6507-4:2018 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6507-4:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 6507-4:2018
INTERNATIONAL ISO
STANDARD 6507-4
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.