EN 28662-2:1994

Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992)

Supplements ISO 8662-1 and describes a type test procedure for establishing the magnitude of vibration in the handle of chipping hammers and riveting hammers. The power tools covered may be electrically, pneumatically or hydraulically driven, or driven by means of an internal combustion engine. Annex A gives a definition of the basicentric coordinate system, Annex B a model test report.

Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 2: Meißelhämmer und Niethämmer (ISO 8662-2:1992)

Dieser Teil von ISO 8662 legt ein Labor- Messverfahren zur Messung von Schwingungen an den Handgriffen von handgehaltenen motorbetriebenen Meisselhämmern und Niethämmern fest. Es handelt sich um ein Messverfahren zur Ermittlung von Schwingungskennwerten am Handgriff einer motorbetriebenen Maschine, die unter vorgegebener Belastung arbeitet. Die Maschinen, die dieser Teil von ISO 8662 abdeckt, können elektrisch, pneumatisch, hydraulisch oder von einem eingebauten Verbrennungsmotor angetrieben sein.

Machines à moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 2: Marteaux burineurs et marteaux riveurs (ISO 8662-2:1992)

Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992)

General Information

• Status: Withdrawn
• Publication Date: 29-May-1994
• Withdrawal Date: 14-Apr-2011
• ICS: 13.160 - Vibration and shock with respect to human beings
• ICS: 25.140.01 - Hand-held tools in general
• Technical Committee: CEN/TC 231 - Mechanical vibration and shock
• Drafting Committee: CEN/TC 231/WG 2 - Hand-arm vibration
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Apr-2011
• Completion Date: 15-Apr-2011
• Directive: 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN 28662-2:2000 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992)

Relations

• Replaced By: EN ISO 28927-10:2011 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)
• Effective Date: 28-May-2011
• Amended By: EN 28662-2:1994/A2:2001 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992/AM 1:1999)
• Effective Date: 22-Dec-2008
• Amended By: EN 28662-2:1994/A1:1995 - Hand-held portable tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 28662-2:2000
01-april-2000
Hand-held portable power tools - Measurement of vibrations at the handle - Part 2:
Chipping hammers and riveting hammers (ISO 8662-2:1992)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 2:
Chipping hammers and riveting hammers (ISO 8662-2:1992)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 2: Meißelhämmer und Niethämmer (ISO 8662-2:1992)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
2: Marteaux burineurs et marteaux riveurs (ISO 8662-2:1992)
Ta slovenski standard je istoveten z: EN 28662-2:1994
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
SIST EN 28662-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 28662-2:2000

---------------------- Page: 2 ----------------------

SIST EN 28662-2:2000

---------------------- Page: 3 ----------------------

SIST EN 28662-2:2000

---------------------- Page: 4 ----------------------

SIST EN 28662-2:2000

---------------------- Page: 5 -
...