Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 2: Test waters

This European Standard defines the requirements for test waters used in the dynamic test rig defined in EN 15664-1.
This document specifies test water(s) when the test procedure is used to:
a)   assess a material for approval as a reference material for a category of materials;
b)   assess a material for approval by way of comparative testing;
c)   obtain data on the interaction of local water with a material.
NOTE   Local waters used for test waters are not treated with corrosion inhibitors.

Einfluss metallischer Werkstoffe auf Wasser für den menschlichen Gebrauch - Dynamischer Prüfstandversuch für die Beurteilung der Abgabe von Metallen - Teil 2: Prüfwässer

Diese Europäische Norm legt die Anforderungen an Prüfwässer fest, die im dynamischen Prüfstandversuch
nach EN 15664-1 verwendet werden.
Dieses Dokument legt Prüfwässer für die Fälle fest, in denen das Prüfverfahren für folgende Aufgabenstellungen
angewendet wird:
a) Beurteilung eines Werkstoffs zur Zulassung als Referenzwerkstoff für eine Werkstoffkategorie;
b) Beurteilung eines Werkstoffs zur Zulassung durch eine Vergleichsprüfung;
c) Erhalt von Daten bezüglich der Wechselwirkung des örtlichen Wassers mit einem Werkstoff.
ANMERKUNG Örtliche Wässer für die Verwendung in Prüfwässern werden nicht mit Korrosionsinhibitoren behandelt.

Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Banc d'essai dynamique pour l'évaluation du relargage de métaux - Partie 2: Eaux d'essai

La présente Norme européenne définit les exigences relatives aux eaux d’essai utilisées dans le banc d’essai
dynamique défini dans l’EN 15664-1.
Le présent document spécifie une ou des eaux d’essai à utiliser dans un mode opératoire d’essai visant à :
a) évaluer un matériau en vue de son approbation comme matériau de référence pour une catégorie de
matériaux donnée ;
b) évaluer un matériau en vue de son approbation au moyen d’essais comparatifs ;
c) obtenir des données sur les interactions de l’eau locale avec un matériau.
NOTE Les eaux locales utilisées comme eaux d’essai ne sont pas traitées avec des inhibiteurs de corrosion.

Vpliv kovinskih materialov na pripravo pitne vode - Dinamično preskuševališče za ocenjevanje izločanja kovin - 2. del: Preskušanje vod

Ta evropski standard določa zahteve za preskušanje vod, uporabljenih pri dinamičnem preskuševališču, določenem v EN 15664-1. Ta dokument določa preskus vode, kadar se preskusni postopek uporablja za: a) ocenitev materiala za odobritev kot referenčni material za kategorijo materialov; b) ocenitev materiala za odobritev na način primerjalnega preskušanja; c) pridobitev podatkov o interakciji lokalne vode z materialom.

General Information

Status
Published
Publication Date
23-Feb-2010
Current Stage
9093 - Decision to confirm - Review Enquiry

Buy Standard

Standard
EN 15664-2:2012
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Einfluss metallischer Werkstoffe auf Wasser für den menschlichen Gebrauch - Dynamischer Prüfstandversuch für die Beurteilung der Abgabe von Metallen - Teil 2: VersuchswässerInfluence des matériaux métalliques sur l'eau destinée à la consommation humaine - Banc d'essai dynamique pour l'évaluation du relargage de métaux - Partie 2: Eaux d'essaiInfluence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 2: Test waters67.250Materiali in predmeti v stiku z živiliMaterials and articles in contact with foodstuffs13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 15664-2:2010SIST EN 15664-2:2012en,fr,de01-januar-2012SIST EN 15664-2:2012SLOVENSKI

STANDARD
SIST EN 15664-2:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15664-2
February 2010 ICS 67.250 English Version

Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 2: Test waters

Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Banc d'essai dynamique pour l'évaluation du relargage de métaux - Partie 2: Eaux d'essai Einfluss metallischer Werkstoffe auf Wasser für den menschlichen Gebrauch - Dynamischer Prüfstandversuch für die Beurteilung der Abgabe von Metallen - Teil 2: Prüfwässer This European Standard was approved by CEN on 9 January 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15664-2:2010: ESIST EN 15664-2:2012

EN 15664-2:2010 (E)

2 Contents Page Foreword ................................................................................................................................................ 3Introduction ........................................................................................................................................... 41Scope .............................................................................................................................................. 52Normative references ................................................................................................................... 53Terms and definitions ................................................................................................................... 54Test rig ........................................................................................................................................... 55Test water....................................................................................................................................... 55.1Principles for the selection of test waters ............................................................................... 55.2Test water for reference materials ........................................................................................... 65.3Test water for comparative testing .......................................................................................... 65.4Test water for interaction of a local water with a material ..................................................... 6Bibliography .......................................................................................................................................... 7 SIST EN 15664-2:2012

EN 15664-2:2010 (E)

3 Foreword This document (EN 15664-2:2010) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2010, and conflicting national standards shall be withdrawn at the latest by August 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document is one of a series of test methods which support associated product standards. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). In respect of potential adverse effects on the quality of water intended for human consumption caused by metallic materials, attention is drawn to the fact that the relevant national regulations remain in force until the adoption of verifiable European acceptance criteria. Water intended for human consumption is hereafter referred to as "drinking water" and means the same as the definition given at Article 2(1) of the Council Directive 98/83/EC on the quality of water intended for human consumption [1]. This document has been drafted in accordance with the CEN Internal Regulations, Part 3. This docum

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.