Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)

ISO 13628-7:2005 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.
It is applicable to all new C/WO riser systems and may be applied to modifications, operation of existing systems and reuse at different locations and with different floating vessels.
ISO 13628-7:2005 is intended to serve as a common reference for designers, manufacturers and operators/users, thereby reducing the need for company specifications.
ISO 13628-7:2005 is limited to risers, manufactured from low alloy carbon steels. Risers fabricated from special materials such as titanium, composite materials and flexible pipes are beyond the scope of ISO 13628-7:2005.
Specific equipment covered by ISO 13628-7:2005 include riser joints, connectors; workover control systems; surface flow trees, surface tree tension frames, lower workover riser packages, lubricator valves, retainer valves, subsea test trees, shear subs, tubing hanger orientation systems, swivels, annulus circulation hoses, riser spiders, umbilical clamps, handling and test tools, tree cap running tools.
Associated equipment not covered by ISO 13628-7:2005 include tubing hangers, internal and external tree caps, tubing hanger running tools, surface coiled tubing units, surface wireline units, surface tree kill and production jumpers.

Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-Produktionssystemen - Teil 7: Komplettierungs-/Auswältigungs-Risersysteme (ISO 13628-7:2005)

Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 7: Systèmes de liaison surface/fond de mer pour complétion/reconditionnement (ISO 13628-7:2005)

L'ISO 13628:2005 donne des exigences et des recommandations relatives à la conception, à l'analyse, aux matériaux, à la fabrication et à l'exploitation des systèmes de liaison surface/fond de mer pour complétion/reconditionnement (C/R) immergés, opérés à partir d'une plate-forme flottante.
Elle s'applique à tous les nouveaux systèmes de liaison surface/fond de mer pour C/R et peut s'appliquer aux modifications, à l'exploitation de systèmes existants et à la réutilisation sur différents sites et avec différentes plates-formes flottantes.
L'ISO 13628:2005 est destinée à servir de référence commune aux concepteurs, fabricants et opérateurs/utilisateurs, et ainsi à réduire le besoin en spécifications d'entreprises.
L'ISO 13628:2005 se limite aux colonnes montantes fabriquées à partir d'acier au carbone faiblement allié. Les colonnes montantes fabriquées à partir de matériaux spéciaux, tels que le titane, et de matériaux composites, ainsi que les colonnes flexibles, n'entrent pas dans le domaine d'application de l'ISO 13628:2005.
Les équipements spécifiques traités par l'ISO 13628:2005 sont les suivants: les joints de colonne montante; les connecteurs; les systèmes de commande de reconditionnement; les têtes d'écoulement en surface; les cadres de tension de tête de production en surface; les modules de colonne montante de reconditionnement inférieurs; les vannes de lubrificateur; les vannes de retenue; les têtes de colonne pour essai de puits sous-marin; les réducteurs de cisaillement; les systèmes d'orientation de suspensions pour tubes de pompage; les têtes d'injection; les flexibles de circulation annulaire; les colliers à coins de colonne montante; les colliers d'ombilical; les outils de manutention et d'essai; les outils de pose de bouchon de tête de production.
Les équipements associés non traités par l'ISO 13628:2005 sont les suivants: les suspensions pour tubes de pompage; les bouchons de tête de production internes et externes; les outils de pose des suspensions pour tubes de pompage; les tubes d'intervention enroulés de surface; les câbles métalliques de surface; les bretelles de production et d'arrêt de tête de production en surface.

Industrija za predelavo nafte in zemeljskega plina - Načrtovanje in delovanje podvodnih proizvodnih sistemov - 7. del: Dvižni sistemi za zaključna dela in dodelavo (ISO 13628-7:2005)

General Information

Status
Published
Publication Date
05-Dec-2006
Withdrawal Date
29-Jun-2007
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Dec-2006
Due Date
20-Jan-2008
Completion Date
06-Dec-2006

Buy Standard

Standard
EN ISO 13628-7:2007
English language
250 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQGHORYDQMH
SRGYRGQLKSURL]YRGQLKVLVWHPRYGHO'YLåQLVLVWHPL]D]DNOMXþQDGHODLQ
GRGHODYR ,62
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-
Produktionssystemen - Teil 7: Komplettierungs-/Auswältigungs-Risersysteme (ISO
13628-7:2005)
Industries du pétrole et du gaz naturel - Conception et exploitation des systemes de
production immergés - Partie 7: Systemes de liaison surface/fond de mer pour
complétion/reconditionnement (ISO 13628-7:2005)
Ta slovenski standard je istoveten z: EN ISO 13628-7:2006
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13628-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 75.180.10
English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 7: Completion/workover riser
systems (ISO 13628-7:2005)
Industries du pétrole et du gaz naturel - Conception et Erdöl- und Erdgasindustrie - Auslegung und Betrieb von
exploitation des systèmes de production immergés - Partie Unterwasser-Produktionssystemen - Teil 7:
7: Systèmes de liaison surface/fond de mer pour Komplettierungs-/Auswältigungs-Risersysteme (ISO 13628-
complétion/reconditionnement (ISO 13628-7:2005) 7:2005)
This European Standard was approved by CEN on 13 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13628-7:2006: E
worldwide for CEN national Members.

Foreword
The text of ISO 13628-7:2005 has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 13628-
7:2006 by Technical Committee CEN/TC 12 "Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2007, and conflicting national
standards shall be withdrawn at the latest by June 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13628-7:2005 has been approved by CEN as EN ISO 13628-7:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13628-7
First edition
2005-11-15
Petroleum and natural gas industries —
Design and operation of subsea
production systems —
Part 7:
Completion/workover riser systems
Industries du pétrole et du gaz naturel — Conception et exploitation
des systèmes de production immergés —
Partie 7: Systèmes de liaison surface/fond de mer pour
complétion/reconditionnement
Reference number
ISO 13628-7:2005(E)
©
ISO 2005
ISO 13628-7:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

ISO 13628-7:2005(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 2
3 Terms, definitions, abbreviated terms and symbols. 4
3.1 Terms and definitions. 4
3.2 Abbreviated terms . 22
3.3 Symbols . 23
4 System requirements . 32
4.1 Purpose. 32
4.2 Description of C/WO riser systems. 32
4.3 System engineering. 32
4.4 System definition. 34
4.5 System design. 34
4.6 System review . 35
4.7 Modes of operation. 36
4.8 Design principles. 44
4.9 Operational principles. 44
4.10 Safety principles . 44
4.11 Barrier requirements . 45
4.12 Regulations, codes and standards . 45
4.13 Operational requirements . 47
4.14 Requirements for organization and personnel qualifications . 49
4.15 Quality system . 49
4.16 Documentation, records and traceability.49
4.17 Verification . 49
4.18 Purchaser/user’s responsibility . 50
4.19 Manufacturer’s responsibility. 50
5 Functional requirements. 50
5.1 Purpose. 50
5.2 System functional requirements . 50
5.3 Drift requirements. 51
5.4 Component requirements . 52
5.5 Workover control system. 71
6 Design requirements . 80
6.1 Purpose. 80
6.2 Design principles. 80
6.3 Loads and load effects. 83
6.4 Component design criteria . 94
6.5 Pipe design criteria. 100
6.6 Connectors . 107
6.7 Design criteria for miscellaneous components. 111
7 Materials and fabrication . 112
7.1 Introduction . 112
7.2 General material requirements. 112
7.3 Products . 120
7.4 Manufacture and fabrication. 123
7.5 Visual inspection and non-destructive testing. 126
ISO 13628-7:2005(E)
7.6 Qualification of assembly (make-up) procedures and assemblers . 128
8 Testing. 128
8.1 General . 128
8.2 Pretest requirements . 128
8.3 Pressure testing . 128
8.4 Hydraulic cleanliness . 129
8.5 Qualification testing.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.