CEN/TR 17603-32-01:2022
(Main)Space engineering - Structural materials handbook - Part 1: Overview and material properties and applications
Space engineering - Structural materials handbook - Part 1: Overview and material properties and applications
The structural materials handbook, SMH, combines materials and design information on established polymer matrix composites with provisional information on the emerging groups of newer advanced materials and their composites. Design aspects are described, along with factors associated with joining and manufacturing. Where possible, these are illustrated by examples or case studies.
The Structural materials handbook contains 8 Parts.
A glossary of terms, definitions and abbreviated terms for these handbooks is contained in Part 8.
The parts are as follows:
Part 1 Overview and material properties and applications Clauses 1 ‐ 9
Part 2 Design calculation methods and general design aspects Clauses 10 ‐ 22
Part 3 Load transfer and design of joints and design of structures Clauses 23 ‐ 32
Part 4 Integrity control, verification guidelines and manufacturing Clauses 33 ‐ 45
Part 5 New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints Clauses 46 ‐ 63
Part 6 Fracture and material modelling, case studies and design and integrity control and inspection Clauses 64 ‐ 81
Part 7 Thermal and environmental integrity, manufacturing aspects, in‐orbit and health monitoring, soft materials, hybrid materials and nanotechnoligies Clauses 82 ‐ 107
Part 8 Glossary
NOTE: The 8 parts will be numbered TR17603-32-01 to TR 17603-32-08
Raumfahrttechnik - Handbuch der Konstruktionswerkstoffe - Teil 1: Übersicht und Materialeigenschaften und Anwendungen
Ingénierie spatiale - Manuel des matériaux structuraux - Partie 1: Vue d’ensemble, propriétés des matériaux et applications
Vesoljska tehnika - Priročnik o strukturnih materialih - 1. del: Pregled in lastnosti materialov ter aplikacije
Priročnik o strukturnih materialih, SMH, združuje informacije o materialih in oblikovanju uveljavljenih polimernih matričnih kompozitov z začasnimi informacijami o nastajajočih skupinah novejših naprednih materialov in njihovih kompozitov. Opisani so vidiki oblikovanja, skupaj z dejavniki združevanja in proizvodnje. Kjer je mogoče, so podani primeri ali študije primerov.
Priročnik o strukturnih materialih vsebuje 8 delov.
Slovar izrazov, opredelitve in okrajšave izrazov za te priročnike so v 8. delu.
Deli so:
1. del: Pregled in lastnosti materialov ter aplikacije Točke 1–9
2. del: Metode za izračun zasnove in splošni vidiki zasnove Točke 10–22
3. del: Prenos obremenitve ter projektiranje spojev in konstrukcij Točke 23–32
4. del: Nadzor integritete, smernice za preverjanje in proizvodnja Točke 33–45
5. del: Novi napredni materiali, napredni kovinski materiali, splošni konstrukcijski vidiki ter prenos obremenitve in oblikovanje sklepov Točke 46–63
6. del: Modeliranje zlomov in materialov, študije primerov, načrtovanje in nadzor integritete ter inšpekcijski pregled Točke 64–81
7. del: Toplotna in okoljska celovitost, proizvodni vidiki, spremljanje stanja materialov v orbiti, mehki materiali, hibridni materiali in nanotehnologije Točke 82–107
8. del: Slovar
OPOMBA: Teh 8 delov je označenih s številkami od TR17603-32-01 do TR 17603-32-08.
General Information
Overview
CEN/TR 17603-32-01:2022 - Space engineering: Structural materials handbook - Part 1: Overview and material properties and applications is the first part of an eight-part Technical Report that consolidates materials and design information for space structural materials. Part 1 (Clauses 1–9) provides a broad overview of polymer matrix composites, emerging advanced materials and composite systems, and introduces material properties, terminology and examples. The handbook is intended to support spacecraft structural design by combining material data, practical design aspects and illustrative case studies where available.
Key Topics and Technical Content
Part 1 organizes and summarizes the foundational material information that underpins later parts of the handbook. Key technical topics include:
- Material families: polymer-based composites, metal and ceramic‑based composites, and advanced materials.
- Reinforcement fibres: carbon, aramid, glass and emerging fibre types and their relevance to CFRP/ARP systems.
- Matrix systems: epoxy, cyanate esters, thermoplastics and non‑polymer matrices with discussion of typical resin systems and prepregs.
- Laminate data & design allowables: material data for laminate design including mechanical and thermal properties, areal weights and single‑ply vs. unidirectional characteristics.
- Environmental effects: temperature (elevated, low/cryogenic), moisture (hygrothermal), radiation and outgassing/offgassing concerns relevant to space applications.
- Specialist properties: thermal expansion (CTE), damping, thermal conductivity and radio‑frequency transparency.
- Manufacturing and examples: manufacturing aspects, simultaneous material/part manufacturing, and case studies illustrating design/manufacturing choices.
- Terminology and references: composite terminology and pointers to ECSS and other reference documents.
Practical Applications and Who Uses It
This Technical Report is practical guidance for professionals working in space systems and operations, including:
- Spacecraft structural and materials engineers selecting composite systems and designing laminates.
- Design and stress analysts using design allowables and laminate mechanical properties.
- Manufacturing and joining engineers implementing prepreg, cure and joining processes for flight hardware.
- Test, verification and reliability teams assessing environmental effects (thermal, moisture, radiation) and outgassing.
- Procurement and standards teams specifying compliant materials and referencing harmonized European technical guidance.
Use cases include satellite primary structures, deployable structures, payload supports and any application where lightweight, high‑performance composite materials are required.
Related Standards
- The handbook is published as CEN/TR 17603-32-01:2022 and will be part of a suite numbered TR17603-32-01 to TR17603-32-08.
- Part 8 contains the glossary of terms, definitions and abbreviations used across the eight parts.
- Part 1 references ECSS documents and other standards for detailed design and verification procedures (see the report’s bibliography for specific references).
Keywords: space engineering, structural materials handbook, polymer matrix composites, laminate design, composite materials, outgassing, material properties, spacecraft structures.
Frequently Asked Questions
CEN/TR 17603-32-01:2022 is a technical report published by the European Committee for Standardization (CEN). Its full title is "Space engineering - Structural materials handbook - Part 1: Overview and material properties and applications". This standard covers: The structural materials handbook, SMH, combines materials and design information on established polymer matrix composites with provisional information on the emerging groups of newer advanced materials and their composites. Design aspects are described, along with factors associated with joining and manufacturing. Where possible, these are illustrated by examples or case studies. The Structural materials handbook contains 8 Parts. A glossary of terms, definitions and abbreviated terms for these handbooks is contained in Part 8. The parts are as follows: Part 1 Overview and material properties and applications Clauses 1 ‐ 9 Part 2 Design calculation methods and general design aspects Clauses 10 ‐ 22 Part 3 Load transfer and design of joints and design of structures Clauses 23 ‐ 32 Part 4 Integrity control, verification guidelines and manufacturing Clauses 33 ‐ 45 Part 5 New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints Clauses 46 ‐ 63 Part 6 Fracture and material modelling, case studies and design and integrity control and inspection Clauses 64 ‐ 81 Part 7 Thermal and environmental integrity, manufacturing aspects, in‐orbit and health monitoring, soft materials, hybrid materials and nanotechnoligies Clauses 82 ‐ 107 Part 8 Glossary NOTE: The 8 parts will be numbered TR17603-32-01 to TR 17603-32-08
The structural materials handbook, SMH, combines materials and design information on established polymer matrix composites with provisional information on the emerging groups of newer advanced materials and their composites. Design aspects are described, along with factors associated with joining and manufacturing. Where possible, these are illustrated by examples or case studies. The Structural materials handbook contains 8 Parts. A glossary of terms, definitions and abbreviated terms for these handbooks is contained in Part 8. The parts are as follows: Part 1 Overview and material properties and applications Clauses 1 ‐ 9 Part 2 Design calculation methods and general design aspects Clauses 10 ‐ 22 Part 3 Load transfer and design of joints and design of structures Clauses 23 ‐ 32 Part 4 Integrity control, verification guidelines and manufacturing Clauses 33 ‐ 45 Part 5 New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints Clauses 46 ‐ 63 Part 6 Fracture and material modelling, case studies and design and integrity control and inspection Clauses 64 ‐ 81 Part 7 Thermal and environmental integrity, manufacturing aspects, in‐orbit and health monitoring, soft materials, hybrid materials and nanotechnoligies Clauses 82 ‐ 107 Part 8 Glossary NOTE: The 8 parts will be numbered TR17603-32-01 to TR 17603-32-08
CEN/TR 17603-32-01:2022 is classified under the following ICS (International Classification for Standards) categories: 49.140 - Space systems and operations. The ICS classification helps identify the subject area and facilitates finding related standards.
CEN/TR 17603-32-01:2022 is associated with the following European legislation: Standardization Mandates: M/496. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase CEN/TR 17603-32-01:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2022
Vesoljska tehnika - Priročnik o strukturnih materialih - 1. del: Pregled in lastnosti
materialov ter aplikacije
Space engineering - Structural materials handbook - Part 1: Overview and material
properties and applications
Raumfahrttechnik - Handbuch der Konstruktionswerkstoffe - Teil 1: Übersicht und
Materialeigenschaften und Anwendungen
Ingénierie spatiale - Manuel des matériaux structuraux - Partie 1: Vue d’ensemble,
propriétés des matériaux et applications
Ta slovenski standard je istoveten z: CEN/TR 17603-32-01:2022
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT CEN/TR 17603-32-01
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
January 2022
ICS 49.140
English version
Space engineering - Structural materials handbook - Part
1: Overview and material properties and applications
Ingénierie spatiale - Manuel des matériaux structuraux Raumfahrttechnik - Handbuch der
- Partie 1: Vue d'ensemble, propriétés des matériaux et Konstruktionswerkstoffe - Teil 1: Übersicht und
applications Materialeigenschaften und Anwendungen
This Technical Report was approved by CEN on 22 November 2021. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2022 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. CEN/TR 17603-32-01:2022 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Table of contents
European Foreword . 32
Introduction . 33
1 Overview . 34
1.1 Scope . 34
1.1.1 General . 34
1.1.2 Polymer composites . 34
1.1.3 Advanced materials . 34
1.2 Polymer-based composites . 35
1.2.1 Background . 35
1.2.2 European space industry perspective. 41
1.3 Metal and ceramic-based composites . 42
1.3.1 Background . 42
1.3.2 Materials technology . 42
1.4 Structural materials . 47
1.4.1 General . 47
1.4.2 Materials . 47
1.4.3 Composite terminology . 49
1.4.4 Simultaneous material and part manufacturing . 49
1.4.5 Case studies and examples . 50
1.5 References . 50
1.5.1 General . 50
1.5.2 ECSS documents . 51
2 Material characteristics and selection . 52
2.1 Introduction . 52
2.1.1 General . 52
2.1.2 Material availability . 52
2.2 Basic features of composite materials for space use . 52
2.2.1 General . 52
2.2.2 Types of composites . 53
2.3 Reinforcement fibres . 53
2.3.1 General . 53
2.3.2 Carbon fibres for CFRP . 53
2.3.3 Aramid fibres for ARP . 54
2.3.4 Glass fibres . 55
2.4 Matrix systems . 56
2.4.1 Epoxy resins . 56
2.4.2 Cyanate esters . 56
2.4.3 Other thermosetting resins . 57
2.4.4 Thermoplastic matrix . 57
2.4.5 Non-polymer matrix . 57
2.5 Common fibre, prepreg and resin systems . 58
2.5.1 Commercial products . 58
2.5.2 Prepreg . 59
2.5.3 Manufacturing aspects . 59
2.6 Triaxial woven fabric . 61
2.6.1 Introduction . 61
2.6.2 TWF weave . 61
2.7 References . 63
2.7.1 General . 63
3 Materials data for laminate design . 64
3.1 Introduction . 64
3.2 Polymer matrices . 64
3.2.1 General . 64
3.2.2 Epoxy: Mechanical properties . 64
3.3 Reinforcement fibres . 68
3.3.1 General . 68
3.3.2 Carbon fibres . 68
3.3.3 Mechanical properties . 70
3.3.4 Thermal properties . 72
3.3.5 Composite manufacturing aspects . 72
3.4 Woven cloths and fabrics . 74
3.5 Weave types . 74
3.6 Areal weight . 75
3.7 Warp and weft characteristics . 75
3.8 Single and unidirectional composite plies . 76
3.9 Design allowables . 82
3.9.1 General . 82
3.9.2 Notation for design allowable data . 83
3.9.3 Unidirectional carbon HT composite . 84
3.9.4 Unidirectional carbon HM composite . 87
3.9.5 Unidirectional glass composite . 90
3.9.6 Single ply fabric carbon HT composite . 91
3.9.7 Single ply fabric aramid composite . 93
3.10 References . 94
3.10.1 General . 94
3.10.2 Sources . 95
4 Laminate mechanical properties . 96
4.1 Introduction . 96
4.2 Load - strain curves . 96
4.3 Effects of elevated temperature . 98
4.3.1 General . 98
4.3.2 Carbon/epoxy composites . 98
4.3.3 Aramid/epoxy composite . 102
4.4 Effects of low and cryogenic temperatures . 103
4.4.1 Material properties variation . 103
4.4.2 Modification to failure criteria . 103
4.4.3 Carbon/epoxy composites . 103
4.4.4 Aramid/epoxy composites . 125
4.4.5 Glass/epoxy composites . 126
4.5 Moisture (hygrothermal) effects . 136
4.5.1 Effects of hygrothermal environment . 136
4.5.2 Moisture effects on carbon fibre composites . 137
4.5.3 Carbon/epoxy composites . 139
4.5.4 Aramid/epoxy composites . 143
4.6 Influence of stress concentrations . 148
4.6.1 General . 148
4.6.2 Carbon/epoxy composites . 149
4.7 Effects of fatigue loading. 152
4.7.1 Introduction . 152
4.7.2 General damage mechanisms . 152
4.7.3 Effect of lay-up . 155
4.7.4 Effects of type of loading . 158
4.7.5 Effects of hygrothermal environment . 159
4.7.6 Effects of central holes . 163
4.8 References . 166
4.8.1 General . 166
5 Specialist properties of composites . 168
5.1 Introduction . 168
5.2 Outgassing and offgassing . 168
5.2.1 General . 168
5.2.2 Materials with satisfactory outgassing characteristics . 169
5.3 Thermal expansion . 170
5.3.1 General . 170
5.3.2 CTE data on the constituents of composite materials . 170
5.3.3 CTE data on unidirectional composites . 173
5.4 Damping properties . 173
5.4.1 General . 173
5.4.2 Analytical notation . 174
5.5 Damping: unidirectional composites . 175
5.5.1 Carbon/epoxy . 175
5.5.2 Glass/epoxy . 178
5.5.3 Aramid/epoxy . 180
5.6 Damping: multidirectional composites . 180
5.6.1 Carbon/epoxy . 180
5.6.2 Glass/epoxy . 189
5.6.3 Aramid/epoxy . 194
5.7 Radiation effects . 194
5.7.1 Aramid composites . 194
5.8 Radio frequency transparency . 195
5.8.1 General . 195
5.8.2 Aramid composites . 195
5.9 Thermal conductivity . 196
5.9.1 General . 196
5.9.2 Materials . 196
5.10 References . 197
5.10.1 General . 197
5.10.2 Sources . 200
5.10.3 ECSS documents . 200
6 Options in polymer composites . 201
6.1 Introduction . 201
6.2 New and development reinforcement fibres . 201
6.2.1 Types of new fibres . 201
6.3 Polyethylene fibres . 204
6.3.1 General . 204
6.3.2 Fibre characteristics . 204
6.3.3 Fibre applications . 205
6.3.4 Composite development . 205
6.3.5 Potential space applications . 206
6.4 Ceramic and refractory fibres . 206
6.5 Characteristics of bismaleimide composites. 207
6.5.1 Characteristics . 207
6.6 Bismaleimide resins . 208
6.6.1 Resin chemistry . 208
6.6.2 Commercial resin systems . 208
6.6.3 Toughened bismaleimide systems . 208
6.6.4 Cured neat resin properties . 210
6.7 Fibres for bismaleimide composites . 210
6.8 Bismaleimide composites . 211
6.8.1 Basic materials data for laminate design . 211
6.8.2 Single composite plies . 212
6.8.3 Unidirectional composites . 213
6.8.4 Quasi-isotropic laminates . 214
6.9 Typical properties of bismaleimide composites . 217
6.9.1 Elevated temperature hygrothermal stability. 217
6.9.2 Toughness . 221
6.9.3 Microcracking . 222
6.9.4 HERMES development programme . 223
6.10 Manufacture of bismaleimide composites . 224
6.10.1 Product forms . 224
6.10.2 Autoclave . 224
6.11 Characteristics of polyimide-based composites . 226
6.11.1 Characteristics . 226
6.11.2 Potential applications . 226
6.12 Polyimide resins . 227
6.12.1 General . 227
6.12.2 Resin chemistry . 227
6.12.3 Commercial resin systems . 228
6.12.4 Cure reaction . 229
6.12.5 Manufacturing techniques . 229
6.13 Fibres for polyimide composites . 232
6.13.1 General . 232
6.13.2 Carbon fibres . 232
6.13.3 Aramid fibres . 234
6.14 Polyimide composites . 234
6.14.1 Basic materials data for laminate design . 234
6.14.2 Unidirectional . 234
6.14.3 Bidirectional . 236
6.15 Typical properties of polyimide composites . 237
6.15.1 Effects of elevated temperatures . 237
6.15.2 Coefficient of thermal expansion . 246
6.15.3 HERMES development programme . 246
6.16 Characteristics of thermoplastic-based composites . 248
6.16.1 General . 248
6.16.2 Characteristics . 248
6.17 Thermoplastic matrix materials . 249
6.17.1 General . 249
6.17.2 Chemistry . 249
6.17.3 Influence of processing conditions . 250
6.17.4 Commercial thermoplastic matrix . 255
6.17.5 Polymer forms . 257
6.18 Fibres for thermoplastic composites . 258
6.18.1 General . 258
6.18.2 Prepreg . 259
6.18.3 Mixtures . 259
6.19 Thermoplastic matrix composites . 260
6.20 Typical properties of thermoplastic composites . 261
6.20.1 Effects of elevated temperatures . 261
6.20.2 Effects at low and cryogenic temperatures . 266
6.20.3 Moisture (hygrothermal) effects . 266
6.20.4 Influence of stress concentrations . 269
6.20.5 Impact resistance . 269
6.21 Specialist properties of thermoplastic composites . 269
6.21.1 Outgassing and offgassing characteristics . 269
6.21.2 Thermal expansion characteristics . 270
6.21.3 Thermal cycling . 270
6.21.4 Damping properties . 270
6.21.5 Radiation effects . 271
6.22 Thermoplastic composites test methods and standards . 272
6.22.1 Standard procedures . 272
6.22.2 Matrix characterisation . 276
6.23 General design aspects of thermoplastic composites . 279
6.23.1 Adequate design . 279
6.23.2 Residual stresses . 279
6.23.3 Effect of manufacturing practices on material properties . 279
6.23.4 Manufacturing faults and damage tolerance . 280
6.24 Joints in thermoplastic composites . 285
6.24.1 Bonded joints . 285
6.24.2 Mechanically fastened . 288
6.25 Manufacture of thermoplastic composites . 288
6.25.1 General . 288
6.25.2 Prepreg and laminates . 290
6.25.3 Mixture products . 290
6.26 Fabrication techniques for thermoplastic composites . 290
6.26.1 Choice of fabrication method . 290
6.26.2 Autoclave . 291
6.26.3 Press clave . 292
6.26.4 Vacuum consolidation . 293
6.26.5 Diaphragm moulding . 293
6.26.6 Press forming . 294
6.26.7 Filament winding . 298
6.26.8 Tape-laying . 299
6.26.9 Injection moulding . 300
6.26.10 Pultrusion . 300
6.26.11 Machining techniques . 300
6.27 Manufacturing economic factors for thermoplastic composites . 300
6.27.1 General . 300
6.27.2 Material costs . 301
6.27.3 Equipment costs . 301
6.27.4 Component costs . 302
6.28 Multi-directional (3-D) composites . 302
6.29 Potential applications for 3-D composites . 303
6.30 Reinforcements for 3-D composites . 305
6.31 3-D fibre architecture . 305
6.31.1 General . 305
6.31.2 Triaxial fabrics . 306
6.31.3 Braided . 307
6.31.4 Woven structures . 308
6.32 Matrix systems for 3-D composites . 310
6.32.1 Thermosetting resins . 310
6.32.2 Thermoplastics . 311
6.32.3 Metal matrix . 312
6.32.4 Ceramic matrix . 312
6.33 Properties of 3-D composites . 312
6.34 Toughened epoxy composites . 312
6.34.1 Introduction . 312
6.34.2 M18/M55J . 313
6.34.3 977-6/M46J . 315
6.35 Cyanate ester composites . 316
6.35.1 General . 316
6.35.2 Prepreg processing . 316
6.35.3 Resin mechanical properties . 316
6.35.4 Low moisture absorption . 316
6.35.5 Microcracking resistance . 318
6.35.6 European space programmes . 318
6.36 Cyanate ester availability . 319
6.36.1 General . 319
6.36.2 Prepreg . 322
6.36.3 Adhesives . 322
6.36.4 Resins . 322
6.37 Space applications for cyanate ester composites . 323
6.37.1 Introduction . 323
6.37.2 Examples . 323
6.37.3 Wider uses of cyanate esters . 324
6.38 Typical properties for cyanate ester composites . 324
6.38.1 Introduction . 324
6.38.2 RS3/XN50 . 324
6.38.3 954-2A/IM7 . 331
6.38.4 954-2A/M55J . 334
6.38.5 954-2/P-100X HTS . 336
6.38.6 954-6/M40J . 336
6.38.7 M22/K135 . 337
6.38.8 CME Behaviour . 337
6.38.9 Low temperature moulding (LTM) systems. 339
6.39 Cyanate siloxane composites . 341
6.39.1 General . 341
6.39.2 Fiberite 996 . 341
6.40 Z-pinning . 343
6.40.1 Introduction . 343
6.40.2 Manufacturing process . 344
6.40.3 Testing . 345
6.41 Triaxial woven fabric composites . 347
6.41.1 Materials . 347
6.41.2 Basic characteristics . 348
6.41.3 Analytical approach . 349
6.42 References . 350
6.42.1 General . 350
6.42.2 Sources . 359
6.42.3 ECSS documents . 359
7 Test methods and standards . 360
7.1 Introduction . 360
7.1.1 General . 360
7.1.2 International standards . 360
7.1.3 Engineering and design data for composites . 360
7.1.4 Failure criteria in fibre-reinforced-polymer composites . 361
7.2 Test method selection . 361
7.2.1 Introduction . 361
7.2.2 Basic guidelines . 361
7.2.3 Material specifications . 362
7.3 Test method standards . 362
7.3.1 General . 362
7.3.2 International ISO standards . 362
7.3.3 American ASTM standards . 363
7.3.4 European EN standards . 363
7.3.5 Airbus Industries . 364
7.3.6 German DIN standards . 364
7.3.7 UK aerospace test method recommendations . 364
7.3.8 In-house test methods and specifications . 364
7.4 Sample and specimen preparation . 364
7.5 Tensile testing . 365
7.5.1 Use of tensile tests . 365
7.5.2 Tensile test method standards . 366
7.5.3 Additional tensile related tests . 368
7.6 Compression testing . 370
7.6.1 Use of compression tests . 370
7.6.2 Evolution in compressive test methods . 370
7.6.3 Factors in compression testing . 374
7.6.4 Comparison of test methods . 374
7.6.5 Additional compression-related tests . 376
7.7 Celanese methods (shear loaded specimens) . 377
7.7.1 Introduction . 377
7.7.2 Modified Celanese methods . 380
7.8 End-loaded specimens . 382
7.8.1 Introduction . 382
7.8.2 Compression test specimens and fixtures . 382
7.8.3 Combined end- and shear-loaded specimens . 384
7.9 IITRI . 384
7.9.1 Introduction . 384
7.9.2 Compression test specimen and fixture . 384
7.10 Other compression tests . 385
7.10.1 Test specimen configurations . 385
7.11 In-plane shear testing . 386
7.11.1 Introduction . 386
7.11.2 Use . 386
7.11.3 Test method comparisons . 387
7.12 ±45° laminate tensile specimen . 390
7.12.1 General . 390
7.12.2 ±45° specimen . 390
7.12.3 10° off-axis specimen . 390
7.13 Double V-notched beam shear test . 391
7.13.1 Introduction . 391
7.13.2 Specimen and fixture . 392
7.13.3 Test
...
The article discusses CEN/TR 17603-32-01:2022, which is a handbook for structural materials in space engineering. The handbook provides information on different types of materials and their applications in structures. It includes details on polymer matrix composites as well as newer advanced materials and their composites. The handbook covers design aspects, joining methods, and manufacturing considerations. It is divided into eight parts, with each part focusing on a specific aspect of structural materials. Part 1 provides an overview, material properties, and applications. Part 8 contains a glossary of terms used throughout the handbook.
기사 제목: CEN/TR 17603-32-01:2022 - 우주 공학 - 구조재료 핸드북 - 파트 1: 개요 및 재료 특성 및 응용 기사 내용: 구조재료 핸드북(SMH)은 기존의 폴리머 매트릭스 복합재료와 최근에 나오는 더 발전된 재료 그룹과 그들의 복합재료에 대한 재료와 설계 정보를 결합시킨다. 설계 측면과 함께 결합과 제조에 관련된 요소들에 대해 설명된다. 가능한 경우, 예시나 케이스 스터디로 설명한다. 구조재료 핸드북은 8부로 구성되어 있다. 이 핸드북을 위한 용어, 정의 및 약어집은 8부에 포함되어 있다. 부분들은 다음과 같다: 부분 1: 개요 및 재료 특성 및 응용 절 1 ‐ 9 부분 2: 설계 계산 방법 및 일반적인 설계 측면 절 10 ‐ 22 부분 3: 하중 전달과 연결부 설계 및 구조 설계 절 23 ‐ 32 부분 4: 무결성 관리, 검증 가이드라인 및 제조 절 33 ‐ 45 부분 5: 새로운 고급 재료, 고금속 재료, 일반적인 설계 측면 및 하중 전달 및 연결부 설계 절 46 ‐ 63 부분 6: 파괴 및 재료 모델링, 케이스 스터디 및 설계, 무결성 관리 및 검사 절 64 ‐ 81 부분 7: 열 및 환경 무결성, 제조 측면, 궤도 내 및 건강 모니터링, 소재 열 디자인, 혼성 재료 및 나노 기술 절 82 ‐ 107 부분 8: 용어집 참고: 부분들은 TR17603-32-01부터 TR 17603-32-08까지 번호가 매겨진다.
The article discusses a structural materials handbook called SMH, which provides information on different types of materials used in space engineering. The handbook includes details on polymer matrix composites as well as newer advanced materials and their composites. It covers design aspects, joining and manufacturing processes, and includes examples and case studies. The handbook is divided into 8 parts, with Part 1 focusing on an overview of materials, their properties, and applications. Part 8 contains a glossary of terms used in the handbook. The parts of the handbook are numbered TR17603-32-01 to TR 17603-32-08.
글 제목: CEN/TR 17603-32-01:2022 - 우주 공학 - 구조 재료 핸드북 - 제1부: 개요 및 재료 특성 및 응용 글 내용: 구조 재료 핸드북(SMH)은 기존의 중합체 행렬 복합재료와 최신의 새로운 고급 재료 및 그들의 복합재료에 대한 재료와 디자인 정보를 결합하고 있다. 설계 측면과 함께 연결 및 제조와 관련된 요인들도 설명되어 있다. 가능한 경우, 이들은 예제나 사례 연구로 설명되어 있다. 구조 재료 핸드북은 8부로 이루어져 있다. 이러한 핸드북의 용어, 정의 및 약어로 된 용어집은 제8부에 포함되어 있다. 부분은 다음과 같다: 제1부: 개요 및 재료 특성 및 응용 - 절 1 ~ 9 제2부: 설계 계산 방법 및 일반적인 설계 측면 - 절 10 ~ 22 제3부: 하중 전달 및 연결 및 구조 설계 - 절 23 ~ 32 제4부: 무결성 제어, 확인 지침 및 제조 - 절 33 ~ 45 제5부: 새로운 고급 재료, 고금속 재료, 일반적인 설계 측면과 하중 전달 및 연결 - 절 46 ~ 63 제6부: 파괴 및 재료 모델링, 사례 연구 및 설계와 무결성 제어와 검사 - 절 64 ~ 81 제7부: 열 및 환경 무결성, 제조 측면, 궤도 내 및 건강 모니터링, 소재, 하이브리드 재료 및 나노기술 - 절 82 ~ 107 제8부: 용어집 참고: 8개의 부분은 TR17603-32-01부터 TR 17603-32-08까지 번호가 붙게 된다.
記事のタイトル：CEN/TR 17603-32-01:2022 - 宇宙工学 - 構造材料ハンドブック - パート1：概要および材料の特性と応用 記事の内容：構造材料ハンドブック（SMH）は、既存のポリマーマトリックス複合材料と新興の上位材料およびその複合材料に関する材料情報と設計情報を結合したものです。設計の側面に加えて、結合および製造に関連する要素も説明されています。可能な限り、それらは例や事例研究によって示されています。 構造材料ハンドブックは8つのパートで構成されています。 これらのハンドブックのための用語集、定義、および略語はパート8に含まれています。 パートは以下の通りです： パート1：概要および材料の特性と応用 1条〜9条 パート2：設計計算方法と一般的な設計の側面 10条〜22条 パート3：荷重伝達と接合部および構造設計 23条〜32条 パート4：耐性制御、検証ガイドラインおよび製造 33条〜45条 パート5：新しい高度な材料、高度な金属材料、一般的な設計の側面と荷重伝達および接合部の設計 46条〜63条 パート6：破壊と材料モデリング、事例研究、設計と耐性制御および検査 64条〜81条 パート7：熱と環境の耐性、製造の側面、軌道内および健康モニタリング、ソフト材料、ハイブリッド材料およびナノテクノロジー 82条〜107条 パート8：用語集 注：パートはTR17603-32-01からTR 17603-32-08まで番号付けされています。
記事のタイトル：CEN/TR 17603-32-01:2022 - 宇宙工学 - 構造材料ハンドブック - 第1部：概要と材料特性と応用 記事の内容：構造材料ハンドブック（SMH）は、確立されたポリマーマトリックス複合材料と新興の高度な材料およびそれらの複合材料に関する材料と設計情報を組み合わせています。設計の側面とともに、結合および製造に関連する要素も説明されています。可能な限り、これらは例または事例研究によって説明されています。構造材料ハンドブックは8つのパートで構成されています。 これらのハンドブックの用語、定義、および省略語の用語集は、第8部に含まれています。 各パートは次のようになっています： パート1: 概要と材料特性と応用 - 条項1〜9 パート2: 設計計算方法と一般的な設計の側面 - 条項10〜22 パート3: 荷重伝達と接合および構造の設計 - 条項23〜32 パート4: 完全性の制御、検証ガイドラインおよび製造 - 条項33〜45 パート5: 新しい高度な材料、高度な金属材料、一般的な設計の側面および荷重伝達と接合 - 条項46〜63 パート6: 破壊と材料モデリング、事例研究および設計と完全性の制御と検査 - 条項64〜81 パート7: 熱および環境の完全性、製造の側面、軌道内および健康モニタリング、ソフト材料、ハイブリッド材料、およびナノテクノロジー - 条項82〜107 パート8: 用語集 注：8つのパートは、TR17603-32-01からTR 17603-32-08まで番号付けされます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...