EN 13763-13:2004

Explosives for civil uses - Detonators and relays - Part 13: Determination of resistance of electric detonators to electrostatic discharge

This European Standard specifies a method for determining whether electric detonators can withstand an electrostatic discharge (ESD) without detonating.
This European Standard is not applicable to magnetically-coupled detonators.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 13: Bestimmung der Widerstandsfähigkeit elektrischer Zünder gegen elektrostatische Entladungen

Diese Europäische Norm legt ein Verfahren fest, mit dem sich feststellen lässt, ob elektrische Zünder einer elektrostatischen Entladung (ESD) ohne Zündung widerstehen können.
Diese Europäische Norm gilt nicht für magnetisch gekoppelte Zünder.

Explosifs à usage civil - Détonateurs et relais - Partie 13: Détermination de la résistance à la décharge électrostatique des détonateurs électriques

La présente Norme européenne définit une méthode en vue de déterminer si les détonateurs électriques
peuvent supporter des charges électrostatiques (ESD) sans détoner.
La présente Norme européenne n'est pas applicable aux détonateurs couplés magnétiquement.

Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 13. del: Ugotavljanje odpornosti električnih detonatorjev proti razelektritvi

General Information

• Status: Published
• Publication Date: 09-Mar-2004
• Withdrawal Date: 29-Sep-2004
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 21-Jul-2018
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13763-13:2004 - Explosives for civil uses - Detonators and relays - Part 13: Determination of resistance of electric detonators to electrostatic discharge

Relations

• Revised: FprEN 13763-13 - Explosives for civil uses - Detonators and detonating cord relays - Part 13: Determination of resistance of electric detonators to electrostatic discharge
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 13: Bestimmung der Widerstandsfähigkeit elektrischer Zünder gegen elektrostatische EntladungenExplosifs a usage civil - Détonateurs et relais - Partie 13: Détermination de la résistance a la décharge électrostatique des détonateurs électriquesExplosives for civil uses - Detonators and relays - Part 13: Determination of resistance of electric detonators to electrostatic discharge71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-13:2004SIST EN 13763-13:2004en01-september-2004SIST EN 13763-13:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-13March 2004ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 13:Determination of resistance of electric detonators to electrostaticdischargeExplosifs à usage civil - Détonateurs et relais - Partie 13:Détermination de la résistance à la déchargeélectrostatique des détonateurs électriquesExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 13: Bestimmung derWiderstandsfähigkeit elektrischer Zünder gegenelektrostatische EntladungenThis European Standard was approved by CEN on 2 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-13:2004: ESIST EN 13763-13:2004

Range of applicability of the test method.8Annex B (normative)
Adjustment of the electrostatic discharge generator.9Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.11SIST EN 13763-13:2004

frequencyradiationEN 13763-15Part 15: Determination of equivalent initiating capabilityEN 13763-16Part 16: Determination of delay accuracyEN 13763-17Part 17: Determination of no-fire current of electric detonatorsEN 13763-18Part 18: Determination of series firing current of electric detonatorsEN 13763-19Part 19: Determination of firing impulse of electric detonatorsEN 13763-20Part 20: Determination of total electrical resistance of electric detonatorsSIST EN 13763-13:2004

Part 21: Determination of flash-over voltage of electric detonatorsEN 13763-22Part 22: Determination of capacitance, insulation resistance and insulation breakdown ofleading wiresEN 13763-23Part 23: Determination of the shock-wave velocity of shock tubesEN 13763-24Part 24: Determination of the electrical non-conductivity of shock tubesEN 13763-25Part 25: Determination of transfer capacity of relays and coupling accessoriesprEN 13763-26Part 26: Definitions, methods and requirements for devices and accessories for reliable andsafe function of detonators and relays.CEN/TS 13763-27Part 27: Definitions, methods and requirements for electronic initiation systemAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.SIST EN 13763-13:2004
...