WC pans and WC suites with integral trap

This European Standard specifies constructional and performance requirements together with test methods for close-coupled suites, one-piece and independent WC pans with integral trap used for personal hygiene manufactured from glazed ceramics or stainless steel.
This European Standard does not apply to squatting toilets, WC pans without integral trap or flushing cisterns as separate appliances.
In the case of independent WC pans, the associated flushing cisterns and pressure valves are covered by other standards and the reference to cisterns in this standard is related only to the definition and requirements of flushing volume.
In the case of close-coupled suites and one-piece WCs, this standard also specifies design, performance requirements and the test methods for designated flushing cisterns with flushing mechanisms, inlet valves and overflows. For these products, this standard covers flushing cisterns designed to be connected to drinking water installations inside buildings.
Before installation of WCs, EN 12056-2 and national requirements need to be taken into consideration.

WC-Becken und WC-Anlagen mit angeformtem Geruchverschluss

Diese Europäische Norm legt die konstruktiven und funktionellen Anforderungen und Prüfverfahren für WC-Kombinationen, Einstück-WCs und WC-Becken mit freiem Zulauf mit angeformtem Geruchverschluss zur persönlichen Hygiene, hergestellt aus Sanitärkeramik oder nichtrostendem Stahl, fest.
Diese Europäische Norm gilt nicht für Hock-WCs, WC-Becken ohne angeformten Geruchverschluss sowie Spülkästen als Einzelgegenstände.
Für WC-Becken mit freiem Zulauf werden die zugehörigen Spülkästen und Druckspüler durch andere Normen abgedeckt. Der Verweis auf Spülkästen in dieser Norm gilt nur für die Begriffe und die Anforderungen an das Spülvolumen.
Für WC-Kombinationen und Einstück-WCs legt diese Norm zudem Konstruktions- und Leistungs-anforderungen und Prüfverfahren für die zugeordneten Spülkästen mit Spülmechanismus, Füllventil und Überlauf fest. Dabei gilt diese Norm nur für Spülkästen, die für den Anschluss an die Trinkwasser-Installation in Gebäuden ausgelegt sind.
Vor dem Einbau von WCs müssen EN 12056-2 und nationale Bestimmungen berücksichtigt werden.

Cuvettes de WC et cuvettes à réservoir attenant à siphon intégré

La présente norme spécifie les prescriptions relatives à la construction et aux performances, ainsi que les méthodes d’essai des cuvettes de WC indépendantes, monobloc et à réservoir attenant, à siphon intégré, en céramique émaillée ou en acier inoxydable, utilisées pour l’hygiène personnelle.
La présente norme ne s’applique pas aux sièges à la turque, aux cuvettes de WC sans siphon intégré, ni aux réservoirs de chasse seuls.
Pour les cuvettes indépendantes, les réservoirs et robinets de chasse associés sont traités dans d’autres normes. La référence aux réservoirs dans la présente norme ne concerne que la définition et des prescriptions relatives au volume de chasse.
Pour les cuvettes à réservoir attenant et les cuvettes monobloc, la présente norme spécifie également les prescriptions relatives à la conception et aux performances, ainsi que les méthodes d’essai applicables aux réservoirs de chasse associés équipés d’un mécanisme de chasse, d’un robinet d’alimentation et d’un trop-plein. Pour ces produits, la présente norme traite des réservoirs de chasse conçus pour être raccordés aux réseaux d’eau potable à l’intérieur des bâtiments.
Avant l’installation de WC, l’EN 12056-2 et les prescriptions nationales doivent être prises en compte.

Straniščne školjke in straniščna oprema z integriranim sifonom

Ta evropski standard določa konstrukcijske zahteve in zahteve v zvezi z delovanjem ter preskusne metode za prigrajene naprave, enodelne in neodvisne WC školjke z integriranim sifonom za osebno higieno, proizvedene iz glazirane keramike ali nerjavnega jekla.
Ta evropski standard se ne uporablja za čepeča stranišča, WC školjke brez integriranega sifona ali izplakovalne kot ločene naprave.
V primeru neodvisnih WC školjk so povezani izplakovalniki in tlačni ventili zajeti v drugih standardih, pri čemer je sklicevanje na izplakovalnike v tem standardu povezano samo z opredelitvijo in zahtevami prostornine za izplakovalno vodo.
Ta standard za prigrajene naprave in enodelne WC školjke določa tudi zasnovo, zahteve glede zmogljivosti in preskusne metode za določene izplakovalnike z mehanizmi za izplakovanje, dovodnimi ventili ter prelivi. V zvezi s temi izdelki so v tem standardu obravnavani izplakovalniki, ki so namenjeni priključitvi na napeljave za pitno vodo v stavbah.
Pred vgradnjo WC školjk ali naprav je treba upoštevati standard EN 12056-2 in nacionalne zahteve.

General Information

Status
Withdrawn
Publication Date
23-Jun-2015
Withdrawal Date
09-Oct-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
10-Oct-2018

Relations

Effective Date
25-Mar-2015
Effective Date
17-Oct-2018

Buy Standard

Standard
EN 997:2012+A1:2015
English language
67 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 997:2012+A1:2015
01-september-2015
6WUDQLãþQHãNROMNHLQVWUDQLãþQDRSUHPD]LQWHJULUDQLPVLIRQRP
WC pans and WC suites with integral trap
WC-Becken und WC-Anlagen mit angeformtem Geruchverschluss
Cuvettes de WC et cuvettes à réservoir attenant à siphon intégré
Ta slovenski standard je istoveten z: EN 997:2012+A1:2015
ICS:
91.140.70 Sanitarne naprave Sanitary installations
SIST EN 997:2012+A1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 997:2012+A1:2015

---------------------- Page: 2 ----------------------

SIST EN 997:2012+A1:2015

EUROPEAN STANDARD
EN 997:2012+A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2015
ICS 91.140.70 Supersedes EN 997:2012
English Version
WC pans and WC suites with integral trap
Cuvettes de WC et cuvettes à réservoir attenant à siphon WC-Becken und WC-Anlagen mit angeformtem
intégré Geruchverschluss
This European Standard was approved by CEN on 9 December 2011 and includes Corrigendum 1 issued by CEN on 18 July 2012 and
Amendment 1 approved by CEN on 6 April 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 997:2012+A1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 997:2012+A1:2015
EN 997:2012+A1:2015 (E)
Contents Page
Foreword .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Classification . 10
5 Functional requirements and test methods for class 1 products . 10
5.1 Depth of water seal . 10
5.2 Flushing requirements . 11
5.2.1 General . 11
5.2.2 Wash of bowl . 11
5.2.3 Flushing of toilet paper . 11
5.2.4 Flushing of fifty small plastic balls . 11
5.2.5 Oversplashing . 11
5.2.6 After-flush volume . 11
5.3 Water absorption .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.