FprEN 14214
(Main)Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
This document specifies requirements and test methods for marketed and delivered fatty acid methyl esters (hereafter known as FAME) to be used either as fuel for diesel engines and for heating applications at 100 % concentration, or as a blend component for fuel for diesel engines and heating applications in accordance with the requirements of appropriate standards. At 100 % concentration it is applicable to fuel for use in diesel engines and in heating applications designed or subsequently adapted to run on 100 % FAME.
NOTE For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, φ.
Flüssige Erdölprodukte - Fettsäure-Methylester (FAME) für Benutzung in Dieselmotoren und Heizöl Applikationen - Anforderungen und Prüfverfahren
Dieses Dokument legt Anforderungen und Prüfverfahren fest für gehandelte und ausgelieferte Fettsäure-Methylester (im Folgenden als FAME (en: fatty acid methyl esters) bezeichnet) für die Verwendung entweder als Kraftstoff für Dieselmotoren und für Heizanwendungen bei einer Konzentration von 100 %, oder als eine Blendkomponente für Kraftstoff für Dieselmotoren und Heizöl in Übereinstimmung mit den Anforderungen der zutreffenden Normen. Bei einer Konzentration von 100 % ist FAME einsetzbar in Kraftstoffen für Dieselmotoren und in Heizungsanlagen, die für den Einsatz von 100 % FAME entwickelt oder nachträglich angepasst wurden.
ANMERKUNG Für die Zwecke dieses Dokuments wird zur Angabe des Massenanteils µ der Ausdruck „% (m/m)“ und für den Volumenanteil φ der Ausdruck „% (V/V)“ verwendet.
Produits pétroliers liquides - Esters méthyliques d'acides gras (EMAG) pour moteurs diesel et comme combustible de chauffage - Exigences et méthodes d'essai
Le présent document spécifie les exigences et méthodes d'essais applicables aux esters méthyliques d'acides gras (dénommés EMAG par la suite), commercialisés et livrés comme carburant pour moteurs diesel et pour des applications de chauffage, soit à une concentration de 100 %, soit comme base de mélange pour les carburants de moteurs diesel et pour le fioul domestique, conformément aux exigences des normes appropriées. A une concentration de 100 %, ce document est applicable aux carburants utilisés par les véhicules à moteur diesel et par des applications de chauffage conçus ou adaptés pour fonctionner avec 100 % d’EMAG.
NOTE Dans le cadre du présent document, les termes «% (m/m)» et «% (V/V)» sont utilisés pour désigner respectivement la fraction massique, µ, et la fraction volumique, φ.
Tekoči naftni proizvodi - Metilni estri maščobnih kislin (FAME) za dizelske motorje in ogrevanje - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2024
Tekoči naftni proizvodi - Metilni estri maščobnih kislin (FAME) za dizelske motorje
in ogrevanje - Zahteve in preskusne metode
Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines
and heating applications - Requirements and test methods
Flüssige Mineralölerzeugnisse - Fettsäure-Methylester (FAME) zur Verwendung in
Dieselmotoren und als Heizöl - Anforderungen und Prüfverfahren
Produits pétroliers liquides - Esters méthyliques d'acides gras (EMAG) pour moteurs
diesel et comme combustible de chauffage - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 14214
ICS:
75.160.20 Tekoča goriva Liquid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 14214
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2024
ICS 75.160.40 Will supersede EN 14214:2012+A2:2019
English Version
Liquid petroleum products - Fatty acid methyl esters
(FAME) for use in diesel engines and heating applications -
Requirements and test methods
Produits pétroliers liquides - Esters méthyliques Flüssige Mineralölerzeugnisse - Fettsäure-Methylester
d'acides gras (EMAG) pour moteurs diesel et comme (FAME) zur Verwendung in Dieselmotoren und als
combustible de chauffage - Exigences et méthodes Heizöl - Anforderungen und Prüfverfahren
d'essai
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 19.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14214:2024 E
worldwide for CEN national Members.
prEN 14214:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Sampling . 8
5 Pump marking . 9
6 Requirements and test methods . 9
6.1 Dyes and markers . 9
6.2 Additives . 9
6.2.1 General . 9
6.2.2 Oxidation stability enhancing additives . 9
6.2.3 Non-FAME components . 9
6.3 Generally applicable requirements and related test methods . 9
6.4 Climate dependent requirements and related test methods . 12
6.4.1 General . 12
6.4.2 FAME being used at 100 % as fuel for diesel engines and heating applications . 12
6.4.3 FAME being used as blend component in diesel fuel and heating fuel . 12
6.5 Precision and dispute . 13
Annex A (normative) Correction factor for calculation of density of FAME . 15
Annex B (informative) Background information for national climate grades selection. 16
Bibliography . 19
prEN 14214:2024 (E)
European foreword
This document (prEN 14214:2024) has been prepared by Technical Committee CEN/TC 19 “Gaseous and
liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the secretariat
of which is held by NEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14214:2012+A2:2019.
This document includes the following significant technical changes with respect to
EN 14214:2012+A2:2019:
— update to the normative references towards undated versions where they do not concern
requirements originating from European Directives (in line with decisions by CEN/TC 19 in
coordination with the European Commission), and updating the effective publication dates where
required;
— scope extension towards different diesel fuel specifications and heating applications as FAME is
being used for more than one blending purpose;
— moving the information on the use of BHT as one example of an oxidation stabilizer in a note;
— inclusion of information on net calorific values for FAME used in heating applications;
— deletion of the requirement on copper corrosion as it is no longer considered meaningful;
— deletion of the requirement on sulphated ash content as it is no longer considered meaningful;
+
— decrease of the Group I metals (Na K) content limit from 5,0 mg/kg to 4,0 mg/kg;
— decrease of the Group II metals (Ca+Mg) content limit from 5,0 mg/kg to 4,0 mg/kg;
— introduction of phosphorus content as an additional reporting criterion to be determined with
EN 14538 in order to obtain information on actual phosphorus levels and experience with the
updated method;
— introduction of saturated monoglycerides content as a reporting criterion in order to obtain
information on actual saturated monoglycerides levels and experience with the method;
— deletion of the paragraph on distilled FAME, as there is no general definition of a distilled FAME,
keeping the climate-related requirements and test methods for FAME used as blend component
untouched and adding a note that FAME meeting these requirements can be produced by, for
example, distillation;
— supplement of the subclause 6.5 to clearly identify the arbitration method for each method;
— deletion of EN ISO 20884 as a possible arbitration method for the determination of sulphur content;
— conversion of EN 23015 to EN ISO 3015 as test method for the determination of cloud point (CP);
— inclusion of EN ISO 22995 as an alternative test method for the determination of cloud point (CP);
prEN 14214:2024 (E)
— definition of EN ISO 3015 as the arbitration test method for the determination of cloud point (CP) in
cases of dispute;
— deletion of Annex A (and renumbering of the following annexes) after re-evaluation of Table A.1 and
conclusion that there are no methods with different precision statements for FAME that are not
already addressed in the methods;
— adaptation of Annex B taking into account the introduction of saturated monoglycerides content as a
reporting criterion in Table 1.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
prEN 14214:2024 (E)
Introduction
This document gives all relevant characteristics, requirements and test methods for fatty acid methyl
esters (FAME), which are known at this time to be necessary to define the product for use in diesel
engines and in heating applications.
Many of the test methods included in this document have been the subject of several interlaboratory
testing to determine their applicability and their precision in relation to different sources of FAME.
Concerning cold temperature operability of diesel blends related to the quality of the FAME used as a
blending component, strong indications towards the relationship with saturated mono-glycerides (SMG)
and steryl-glycosides (SG) have become known. As no test method to detect those components separately
had been developed, an interim solution in setting cold filter plugging point (CFPP) and cloud point
limitations was included in this standard (see Table 3). A study within CEN has indicated that FAME
conform to the current precision statements of EN 116 and EN 23015.
With EN 17057, a suitable test method for the direct determination of the content of saturated
monoglycerides in FAME is now available. To gain experience in all member states with SMG, the
parameter is included as a reporting parameter in Table 1. The information gained will be used for
consideration for future limit setting.
Since EN 16934 [1] was published in 2019, data gathered for Europe have shown very low levels of SG
below the detection limit and there have been no reported problems in the field that have been attributed
to SG content. It is therefore not currently possible to determine an appropriate limit for SG. The situation
and data will continue to be monitored.
In order to improve the lifetime of the exhaust aftertreatment system, lowering of the phosphorus limit
is under investigation. EN 14538 for the determination of phosphorus has improved precision compared
to EN 14107 and EN 16294 and is implemented as a reporting criterion to be able to collect data on
phosphorus content in the future.
prEN 14214:2024 (E)
1 Scope
This document specifies requirements and test methods for marketed and delivered fatty acid methyl
esters (hereafter known as FAME) to be used either as fuel for diesel engines and for heating applications
at 100 % concentration, or as a blend component for fuel for diesel engines and heating applications in
accordance with the requirements of appropriate standards. At 100 % concentration it is applicable to
fuel for use in diesel engines and in heating applications designed or subsequently adapted to run on
100 % FAME.
NOTE For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent
respectively the mass fraction, µ, and the volume fraction, φ.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 116, Diesel and domestic heating fuels — Determination of cold filter plugging point — Stepwise cooling
bath method
FprEN 12662-2, Liquid petroleum products — Determination of total contamination — Part 2: Fatty acid
methyl esters
EN 14103, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of ester and
linolenic acid methyl ester contents
EN 14104, Fat and oil derivates - Fatty acid methyl ester (FAME) - Determination of acid value
EN 14105, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of free and total
glycerol and mono-, di-, triglyceride contents
EN 14106, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of free glycerol
content
EN 14107, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of phosphorus
content by inductively coupled plasma (ICP) emission spectrometry
EN 14108, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of sodium content
by atomic absorption spectrometry
EN 14109, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of potassium
content by atomic absorption spectrometry
EN 14110, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of methanol content
EN 14111, Fa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.