iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 8222:2020/A1:2022

(Amendment)

Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) - Amendment 1: Correction of two typographical errors (ISO 8222:2020/Amd 1:2022)

Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) - Amendment 1: Correction of two typographical errors (ISO 8222:2020/Amd 1:2022)

Messsysteme für Mineralölerzeugnisse - Kalibrierung - Volumenmaße, Bezugsmessbehälter und Feldmaße (einschließlich Gleichungen für die Eigenschaften von Flüssigkeiten und Werkstoffen) - Änderung 1 (ISO 8222:2020/Amd 1:2022)

No scope available

Systèmes de mesure du pétrole - Étalonnage - Contenants de mesure volumétriques, jauges étalons et contenants de mesure de travail (y compris les formules relatives aux propriétés des liquides et des matériaux) - Amendement 1: Correction de deux erreurs typographiques(ISO 8222:2020/Amd 1:2022)

Naftni merilni sistemi - Umerjanje - Volumetrične mere, rezervoarji in terenske mere (vključno s formulami za lastnosti tekočin in materialov) - Dopolnilo A1: Popravek dveh tiskarskih napak (ISO 8222:2020/Amd 1:2022)

General Information

Status
Published
Publication Date
18-Jan-2022
Withdrawal Date
30-Jul-2022
ICS
75.180.30 - Volumetric equipment and measurements
Technical Committee
CEN/TC 19 - Petroleum products, lubricants and related products
Drafting Committee
CEN/TC 19 - Petroleum products, lubricants and related products
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Jan-2022
Completion Date
19-Jan-2022
Ref Project
SIST EN ISO 8222:2020/A1:2022 - Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) - Amendment 1: Correction of two typographical errors (ISO 8222:2020/Amd 1:2022)

Relations

Amends
EN ISO 8222:2020 - Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020)
Effective Date
03-Feb-2021

Buy Standard

EN ISO 8222:2020/A1:2022EN ISO 8222:2020/A1:2022
PreviousNext
Amendment
EN ISO 8222:2020/A1:2022
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2022
Naftni merilni sistemi - Umerjanje - Volumetrične mere, rezervoarji in terenske
mere (vključno s formulami za lastnosti tekočin in materialov) - Dopolnilo A1:
Popravek dveh tiskarskih napak (ISO 8222:2020/Amd 1:2022)
Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and
field measures (including formulae for properties of liquids and materials) - Amendment
1: Correction of two typographical errors (ISO 8222:2020/Amd 1:2022)
Messsysteme für Mineralölerzeugnisse - Kalibrierung - Volumenmaße,
Bezugsmessbehälter und Feldmaße (einschließlich Gleichungen für die Eigenschaften
von Flüssigkeiten und Werkstoffen) - Änderung 1 (ISO 8222:2020/Amd 1:2022)
Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and
field measures (including formulae for properties of liquids and materials) - Amendment
1: Correction of two typographical errors (ISO 8222:2020/Amd 1:2022)
Ta slovenski standard je istoveten z: EN ISO 8222:2020/A1:2022
ICS:
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8222:2020/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2022
EUROPÄISCHE NORM
ICS 75.180.30
English Version
Petroleum measurement systems - Calibration -
Volumetric measures, proving tanks and field measures
(including formulae for properties of liquids and
materials) - Amendment 1: Correction of two
typographical errors (ISO 8222:2020/Amd 1:2022)
Systèmes de mesure du pétrole - Étalonnage - Messsysteme für Mineralölerzeugnisse - Kalibrierung -
Contenants de mesure volumétriques, jauges étalons et Volumenmaße, Bezugsmessbehälter und Feldmaße
contenants de mesure de travail (y compris les (einschließlich Gleichungen für die Eigenschaften von
formules relatives aux propriétés des liquides et des Flüssigkeiten und Werkstoffen) - Änderung 1 (ISO
matériaux) - Amendement 1: Correction de deux 8222:2020/Amd 1:2022)
erreurs typographiques(ISO 8222:2020/Amd 1:2022)
This amendment A1 modifies the European Standard EN ISO 8222:2020; it was approved by CEN on 9 December 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8222:2020/A1:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 8222:2020/A1:2022) has been prepared by Technical Committee ISO/TC 28
"Petroleum and related products, fuels and lubricants from natural or synthetic sources" in
collaboration with Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related
products of petroleum, synthetic and biological origin” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2022, and conflicting national standards shall be
withdrawn at the latest by July 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 12185:2024(Main)
Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO 12185:2024)
SIST EN ISO 12185:2024

This document specifies a method for the determination, using an oscillating U-tube density meter, of the density of crude petroleum and related products within the range 600 kg/m3 to 1 100 kg/m3, which can be handled as single-phase liquids at the test temperature and pressure.
This document is applicable to liquids of any vapour pressure as long as suitable precautions are taken to ensure that they remain in single phase. Loss of light components leads to changes in density during both the sample handling and the density determination.
This method is not intended for use with in-line density meters.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7278-2:2022(Main)
Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022)
SIST EN ISO 7278-2:2023

This document provides descriptions of the different types of pipe provers, otherwise known as displacement provers, currently in use. These include sphere (ball) provers and piston provers operating in unidirectional and bidirectional forms. It applies to provers operated in conventional, reduced volume, and small volume modes.
This document gives guidelines for:
—    the design of pipe provers of each type;
—    the calibration methods;
—    the installation and use of pipe provers of each type;
—    the interaction between pipe provers and different types of flowmeters;
—    the calculations used to derive the volumes of liquid measured (see Annex A);
—    the expected acceptance criteria for fiscal and custody transfer applications, given as guidance for both the calibration of pipe provers and when proving flowmeters (see Annex C).
This document is applicable to the use of pipe provers for crude oils and light hydrocarbon products which are liquid at ambient conditions. The principles apply across applications for a wider range of liquids, including water. The principles also apply for low vapour pressure, chilled and cryogenic products, however use with these products can require additional guidance.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8222:2020(Main)
Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020)
SIST EN ISO 8222:2020

This document describes the design, use and calibration of volumetric measures (capacity measures) which are intended for use in fixed locations in a laboratory or in the field. This document gives guidance on both standard and non-standard measures. It also covers portable and mobile measures. This document is applicable to the petroleum industry; however, it may be applied more widely to other applications.
This document excludes measures for cryogenic liquids and pressurized measures as used for liquid petroleum gas (LPG) and liquefied natural gas (LNG).
Volumetric measures are classified as test measures or prover tanks depending on capacity and design.
Measures described in this document are primarily designed, calibrated and used to measure volumes from a measure which is wetted and drained for a specified time before use and designated to deliver. Many of the provisions, however, apply equally to measures which are used to measure a volume using a clean and dry measure and designated to contain.
Guidance is given regarding commonly expected uncertainties and calibration specifications.
The document also provides, in Annex A, reference formulae describing the properties of water and other fluids and materials used in volumetric measurement more generally.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8311:2013(Main)
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods (ISO 8311:2013)
SIST EN ISO 8311:2014

ISO 8311:2013 specifies a method for the internal measurement of membrane tanks used in ships for the transport of refrigerated light hydrocarbon fluids. In addition to the actual process of measurement, it sets out the calculation procedures for compiling the tank capacity table and correction tables to be used for the computation of cargo quantities. ISO 8311:2013, with some modification, can also be applicable to the calibration of independent prismatic tanks.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7278-1:1995(Main)
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987)
SIST EN ISO 7278-1:1998

The purpose of proving a meter is to determine its relative error or its meter factor as a function of flow rate and other parameters such as temperature, pressure and viscosity. The following types of proving systems are in use: tank prover systems; pipe provers, bidirectional and unidirectional; master meters. They can be used either connected (fixed or mobile) to the metering station or in a central proving station.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6551:1995(Main)
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or elecronic pulsed data (ISO 6551:1982)
SIST EN ISO 6551:1998

Establishes guidelines for ensuring the quantities stated, a main objective being to ensure the integrity of the primary indication. In order to achieve different levels of security, criteria and recommendations for the design, installation, use and maintenance of the relevant equipment are laid down. Regulatory requirements, including those for safety, are not specifically covered in detail but certain general cautionary notes on safety are included for guidance.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4267-2:1995(Main)
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988)
SIST EN ISO 4267-2:1998

Defines the various terms employed in the calculation of metered petroleum quantities. Also specifies the equations which allow the values of correction factors to be computed. Also gives rules for the sequence, rounding and significant figures to be employed in a calculation. Provides tables which may be used to look up specific correction factors should it not be desired to calculate them by manual as well as computer methods. The field of application is the volumetric measurement of liquid hydrocarbons, including liquefied petroleum gases, by meter and prover. It does not include two-phase fluids.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12185:2024(Main)
Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO 12185:2024)
SIST EN ISO 12185:2024

This document specifies a method for the determination, using an oscillating U-tube density meter, of the density of crude petroleum and related products within the range 600 kg/m3 to 1 100 kg/m3, which can be handled as single-phase liquids at the test temperature and pressure.
This document is applicable to liquids of any vapour pressure as long as suitable precautions are taken to ensure that they remain in single phase. Loss of light components leads to changes in density during both the sample handling and the density determination.
This method is not intended for use with in-line density meters.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7278-2:2022(Main)
Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022)
SIST EN ISO 7278-2:2023

This document provides descriptions of the different types of pipe provers, otherwise known as displacement provers, currently in use. These include sphere (ball) provers and piston provers operating in unidirectional and bidirectional forms. It applies to provers operated in conventional, reduced volume, and small volume modes.
This document gives guidelines for:
—    the design of pipe provers of each type;
—    the calibration methods;
—    the installation and use of pipe provers of each type;
—    the interaction between pipe provers and different types of flowmeters;
—    the calculations used to derive the volumes of liquid measured (see Annex A);
—    the expected acceptance criteria for fiscal and custody transfer applications, given as guidance for both the calibration of pipe provers and when proving flowmeters (see Annex C).
This document is applicable to the use of pipe provers for crude oils and light hydrocarbon products which are liquid at ambient conditions. The principles apply across applications for a wider range of liquids, including water. The principles also apply for low vapour pressure, chilled and cryogenic products, however use with these products can require additional guidance.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8222:2020(Main)
Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020)
SIST EN ISO 8222:2020

This document describes the design, use and calibration of volumetric measures (capacity measures) which are intended for use in fixed locations in a laboratory or in the field. This document gives guidance on both standard and non-standard measures. It also covers portable and mobile measures. This document is applicable to the petroleum industry; however, it may be applied more widely to other applications.
This document excludes measures for cryogenic liquids and pressurized measures as used for liquid petroleum gas (LPG) and liquefied natural gas (LNG).
Volumetric measures are classified as test measures or prover tanks depending on capacity and design.
Measures described in this document are primarily designed, calibrated and used to measure volumes from a measure which is wetted and drained for a specified time before use and designated to deliver. Many of the provisions, however, apply equally to measures which are used to measure a volume using a clean and dry measure and designated to contain.
Guidance is given regarding commonly expected uncertainties and calibration specifications.
The document also provides, in Annex A, reference formulae describing the properties of water and other fluids and materials used in volumetric measurement more generally.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day