EN ISO 28927-9:2009
(Main)Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
ISO 28927-9:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven scaling hammers and needle scalers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine.
ISO 28927-9:2009 is applicable to engraving pens, scabblers, scaling hammers and needle scalers, driven pneumatically or by other means, intended for paint, rust or scale removal with reciprocating work tools or needles and for all kinds of materials.
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 9: Abklopfer und Nadelentroster (ISO 28927-9:2009)
Dieser Teil von ISO 28927 legt ein Laborverfahren zur Messung der Hand-Arm-Schwingungen fest, die an den Handgriffen von handgehaltenen motorbetriebenen Abklopfern und Nadelentrostern hervorgerufen werden. Es handelt sich um ein Messverfahren zur Ermittlung der Schwingungskennwerte (Schwingungs-emissionswerte) an den Greifstellen der Maschine, die unter bestimmten Messbedingungen betrieben wird. Der Zweck besteht darin, die Kennwerte zum Vergleich verschiedener Modelle derselben Maschinenart zu verwenden.
Dieser Teil von ISO 28927 gilt für Gravierstifte, Abklopfer, Meißelabklopfer und Nadelentroster (siehe Abschnitt 5) zum Entfernen von Farbe, Rost und Ablagerungen mit hin- und hergehenden Werkzeugen oder Nadeln, die pneumatisch oder auf andere Weise angetrieben werden und zum Einsatz auf allen Arten von Werkstoff vorgesehen sind.
ANMERKUNG Um eine Verwechslung zu vermeiden, wird in dieser Norm zwischen der (motorbetriebenen) Maschine und dem Werkzeug oder Einsatzwerkzeug strikt unter¬schieden.
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 9: Marteaux dérouilleurs et marteaux à aiguilles (ISO 28927-9:2009)
L'ISO 28927-9:2009 spécifie une méthode de mesure en laboratoire des émissions de vibrations transmises aux mains s'exerçant au niveau des poignées des marteaux dérouilleurs et des marteaux à aiguilles tenus à la main. Il s'agit d'une méthode d'essai de type définissant l'amplitude des vibrations aux zones de préhension des machines fonctionnant dans des conditions d'essai spécifiques. Il est prévu d'utiliser les résultats pour comparer différents modèles du même type de machine.
L'ISO 28927-9:2009 s'applique aux outils de gravure, aux machines à smillage, aux marteaux dérouilleurs et aux marteaux à aiguilles, pneumatiques ou entraînés par un autre dispositif, destinés à éliminer la peinture, la rouille et la calamine au moyen d'outils de travail ou d'aiguilles alternatifs sur tous les types de matériaux.
Ročna prenosna električna orodja - Preskusne metode za vrednotenje oddajanja vibracij - 9. del: Kladiva in iglasti odstranjevalniki kamna ali betona (ISO 28927-9:2009)
Ta del ISO 28927 določa laboratorijsko metodo merjenja emisij ročnega oddajanja vibracij na ročajih ročnih električnih kladiv in iglastih odstranjevalnikov kamna ali betona. To je postopek tipskega preskusa za vzpostavljanje razsežnosti vibracij v območju držanja stroja, ko deluje pod določenimi preskusnimi pogoji. Namenjeno je temu, da se rezultati uporabijo za primerjavo različnih modelov strojev istega tipa. Ta del ISO 28927 velja za gravurna peresa, peskalnike, kladiva za odstranjevanje kamna ali betona in igle za odstranjevanje kamna in betona (glej Klavzulo 5), pnevmatično ali kako drugače gnane.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 9: Abklopfer und Nadelentroster (ISO 28927-9:2009)Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 9: Marteaux dérouilleurs et marteaux à aiguilles (ISO 28927-9:2009)Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)25.140.01Hand-held tools in general13.160Vpliv vibracij in udarcev na ljudiVibration and shock with respect to human beingsICS:Ta slovenski standard je istoveten z:EN ISO 28927-9:2009SIST EN ISO 28927-9:2010en,fr01-februar-2010SIST EN ISO 28927-9:2010SLOVENSKI
STANDARDSIST EN ISO 8662-14:20001DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 28927-9
December 2009 ICS 13.160; 25.140.10 Supersedes EN ISO 8662-14:1996English Version
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 9: Marteaux dérouilleurs et marteaux à aiguilles (ISO 28927-9:2009)
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 9: Abklopfer und Nadelentroster (ISO 28927-9:2009) This European Standard was approved by CEN on 14 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 28927-9:2009: ESIST EN ISO 28927-9:2010
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC .4Annex ZB (informative)
Relationship between this
European
Standard and the Essential Requirements
of EU Directive 2006/42/EC .5 SIST EN ISO 28927-9:2010
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 98/37/EC, Machinery, amended by Directive 98/79/EC. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive, except ER 1.7.4 d) and 2.2, and associated EFTA regulations. WARNING — Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard.
Relationship between this
European
Standard and the Essential Requirements
of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirement of that Directive, except ER 2.2.1.1, and associated EFTA regulations. WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.
Reference numberISO 28927-9:2009(E)© ISO 2009
INTERNATIONAL STANDARD ISO28927-9First edition2009-12-15Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers Machines à moteur portatives — Méthodes d'essai pour l'évaluation de l'émission de vibrations — Partie 9: Marteaux dérouilleurs et marteaux à aiguilles
ISO 28927-9:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 28927-9:2009(E) © ISO 2009 – All rights reserved iii Contents Page Foreword.iv Introduction.vi 1 Scope.1 2 Normative references.1 3 Terms, definitions and symbols.2 3.1 Terms and definitions.2 3.2 Symbols.2§ 4 Basic standards and vibration test codes.3 5 Description of the family of machines.3 6 Characterization of vibration.5 6.1 Direction of measurement.5 6.2 Location of measurements.5 6.3 Magnitude of vibration.7 6.4 Combination of vibration directions.7 7 Instrumentation requirements.8 7.1 General.8 7.2 Mounting of transducers.8 7.2.1 Specification of transducer.8 7.2.2 Fastening of transducers.8 7.3 Frequency weighting filter.8 7.4 Integration time.8 7.5 Auxiliary equipment.9 7.6 Calibration.9 8 Testing and operating conditions of the machinery.9 8.1 General.9 8.2 Operating conditions.9 8.2.1 Pneumatic machines.9 8.2.2 Hydraulic machines.10 8.2.3 Electrical machines.10 8.3 Other quantities to be specified.10 8.4 Attached equipment, work piece and task.10 8.4.1 Test set-up and procedure.10 8.4.2 Feed force.11 8.5 Operators.11 9 Measurement procedure and validity.11 9.1 Reported vibration values.11 9.2 Declaration and verification of the vibration emission value.12 10 Measurement report.12 Annex A (informati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.