EN 558:2008/AC:2010

Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves

TC - Correction of Class designation in the two last lines first column of Table 9 - Mechanical engineering

Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Nach PN und Class bezeichnete Armaturen

Robinetterie industrielle - Dimensions face-à-face et face-à-axe de la robinetterie métallique utilisée dans les systèmes de canalisations à brides - Appareils de robinetterie désignés PN et Class

Industrijski ventili - Vgradne dolžine kovinskih ventilov za vgradnjo v cevovode s prirobnicami - Ventili, označeni po PN in Class

Ta evropski standard določa vgradne dolžine kovinskih ventilov, označenih po PN in Class, za vgradnjo v cevovode s prirobnicami. Ta standard zajema ventile z naslednjimi vrednostmi PN, Class in DN:
PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; PN 500 Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500.
OPOMBA Med čakanjem na revizijo EN 1092-1, ki zadeva PN 160, PN 250, PN 320, PN 400 in PN 500, vgradne dolžine temeljijo na DIN 2548, DIN 2549, DIN 2550, DIN 2551, DIN 2627, DIN 2628, DIN 2629 in DIN 2638.
3 DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 800; DN 900; DN 1000; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2000.
Za ventile, ki imajo ohišje iz drugih materialov, kot je kovina, se lahko uporabljajo iste vgradne mere.

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2010
• Withdrawal Date: 20-Dec-2011
• ICS: 23.060.10 - Globe valves
• Technical Committee: CEN/TC 69 - Industrial valves
• Drafting Committee: CEN/TC 69/WG 1 - Basic standards
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 21-Dec-2011
• Completion Date: 21-Dec-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 558:2008/AC:2011 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves

Relations

• Merged Into: EN 558:2008+A1:2011 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
• Effective Date: 19-Jan-2023
• Corrects: EN 558:2008 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
• Effective Date: 09-Aug-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Nach PN und Class bezeichnete ArmaturenRobinetterie industrielle - Dimensions face-à-face et face-à-axe de la robinetterie métallique utilisée dans les systèmes de canalisations à brides - Appareils de robinetterie désignés PN et ClassIndustrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 558:2008/AC:2010SIST EN 558:2008/AC:2011en,fr,de01-april-2011SIST EN 558:2008/AC:2011SLOVENSKI
STANDARD



SIST EN 558:2008/AC:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 558:2008/AC
September 2010
Septembre 2010
September 2010 ICS 23.060.10 English version Version Française Deutsche Fassung
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Robinetterie industrielle - Dimensions face-à-face et face-à-axe de la robinetterie métallique utilisée dans les systèmes de canalisations à brides - Appareils de robinetterie désignés PN et Class
Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Nach PN und Class bezeichnete Armaturen This corrigendum becomes effective on 1 September 2010 for incorporation in the three official language versions of the EN
...