Abstract

This document specifies a test method for the measurement of the strain hardening modulus which is used as a measure for the resistance to slow crack growth of polyethylene. The strain hardening modulus is obtained from true stress versus draw ratio curves on PE-HD geosynthetic barrier samples.
This standard specifies how measurement is performed and how the strain hardening modulus is determined. Details of the required equipment, precision and sample preparations are given.
This test method is suitable for all PE-HD types of GBR-P.

Status
Not Published
Publication Date
16-May-2028
Drafting Committee
CEN/TC 189/WG 5 - Durability
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
29-Oct-2026
Due Date
03-Feb-2027
Completion Date
29-Oct-2026

Buy Documents

Relations

Effective Date
18-Mar-2026

Buy Documents

Get Certified

Connect with accredited certification bodies for this standard

Control Union Certifications

Global certification for agriculture and sustainability.

RVA Netherlands Verified

Hohenstein Institut

Textile testing and certification.

DAKKS Germany Verified

Bureau Veritas Bangladesh

Bureau Veritas certification services in Bangladesh.

BAB Bangladesh Verified

Sponsored listings

Frequently Asked Questions

prEN 17096 is a draft published by the European Committee for Standardization (CEN). Its full title is "Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers". This standard covers: This document specifies a test method for the measurement of the strain hardening modulus which is used as a measure for the resistance to slow crack growth of polyethylene. The strain hardening modulus is obtained from true stress versus draw ratio curves on PE-HD geosynthetic barrier samples. This standard specifies how measurement is performed and how the strain hardening modulus is determined. Details of the required equipment, precision and sample preparations are given. This test method is suitable for all PE-HD types of GBR-P.

This document specifies a test method for the measurement of the strain hardening modulus which is used as a measure for the resistance to slow crack growth of polyethylene. The strain hardening modulus is obtained from true stress versus draw ratio curves on PE-HD geosynthetic barrier samples. This standard specifies how measurement is performed and how the strain hardening modulus is determined. Details of the required equipment, precision and sample preparations are given. This test method is suitable for all PE-HD types of GBR-P.

prEN 17096 is classified under the following ICS (International Classification for Standards) categories: 59.080.70 - Geotextiles. The ICS classification helps identify the subject area and facilitates finding related standards.

prEN 17096 has the following relationships with other standards: It is inter standard links to EN 17096:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

prEN 17096 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Geosintetika - Preskusna metoda za ugotavljanje modula deformacijskega
utrjevanja geosintetičnih pregrad iz PE-HD
Geosynthetics - Test method for the determination of the strain hardening modulus of
PE-HD geosynthetic barriers
Geokunststoffe - Prüfverfahren für die Bestimmung des Dehnverfestigungsmoduls von
PE-HD-Dichtungsbahnen
Géosynthétiques - Méthode d'essai pour la détermination du module d'écrouissage des
Géomembranes HDPE
Ta slovenski standard je istoveten z: prEN 17096
ICS:
59.080.70 Geotekstilije Geotextiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2026
ICS Will supersede EN 17096:2018
English Version
Geosynthetics - Test method for the determination of the
strain hardening modulus of PE-HD geosynthetic barriers
Géosynthétiques - Méthode d'essai pour la Geokunststoffe - Prüfverfahren für die Bestimmung des
détermination du module d'écrouissage des Dehnverfestigungsmoduls von PE-HD-
Géomembranes HDPE Dichtungsbahnen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 189.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17096:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 6
5 Apparatus . 6
5.1 Tensile-testing machine . 6
5.2 Devices for measuring the thickness and width of the test specimens . 7
5.3 Punch die tool . 7
5.4 Device for application of the gauge marks . 7
6 Test specimen . 7
6.1 Dimensions and figure of the test specimen . 7
6.2 Test specimen preparation . 8
7 Test procedure . 8
8 Calculation . 9
9 Test report . 10
Annex A (informative) Neo-Hookean constitutive model . 11
Bibliography . 13

European foreword
This document (prEN 17096:2026) has been prepared by Technical Committee CEN/TC 189
“Geosynthetics”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 17096:2018.
This document includes the following significant technical changes with respect to EN 17096:2018:
— the normative references have been updated;
— Formula (3) has been modified;
— the document has been editorially revised.
1 Scope
This document specifies a test method for the measurement of the strain hardening modulus which is
used as a measure for the resistance to slow crack growth of polyethylene. The strain hardening
modulus is obtained from true stress versus draw ratio curves on HDPE geosynthetic barrier samples.
This document specifies how measurement is performed and how the strain hardening modulus is
determined. Details of the required equipment, precision and sample preparations are given.
This test method is suitable for all HDPE types of GBR-P.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1849-2:2019, Flexible sheets for waterproofing - Determination of thickness and mass per unit area -
Part 2: Plastics and rubber sheets for roof waterproofing
EN ISO 527-1, Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1)
EN ISO 7500-1, Metallic materials - Calibration and verification of static uniaxial testing machines - Part
1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO
7500-1)
EN ISO 9513, Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513)
EN ISO 9863-1:2016, Geosynthetics - Determination of thickness at specified pressures - Part 1: Single
layers (ISO 9863-1:2016)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
NOTE The symbols, their terms and definitions, as given below, are in line with EN ISO 527-1 and/or
ISO 18488.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1
gauge length
l
initial distance between the gauge marks on the central part of the test specimen
Note 1 to entry: Gauge length is expressed in mm.
3.2
thickness
d
initial dimension of the cross-section perpendicular to the plane in the central part of a test specimen
Note 1 to entry: Thickness is expressed in mm.
3.3
width
b
initial dimension of the cross-section in the central part of a test specimen
Note 1 to entry: Width is expressed in mm.
3.4
test speed
v
rate of separation of the gripping jaws
Note 1 to entry: Test speed is expressed in mm/min.
3.5
length
l
distance between the gauge marks on the central part of the test specimen at any given moment
Note 1 to entry: Length is expressed in mm.
3.6
stress
σ
normal force per unit area of the original cross-section within the gauge length
Note 1 to entry: Stress is expressed in MPa.
3.7
yield stress
σ
y
stress at the strain at yield
Note 1 to entry: Stress at yield is expressed in MPa.
3.8
true stress
𝜎𝜎
T
draw ratio multiplied with the normal force per unit area of the original cross-section within the gauge
length
Note 1 to entry: True stress is expressed in MPa.
3.9
strain
ε
increase in length per unit original length of the gauge
Note 1 to entry: Strain is expressed as a percentage (%).
3.10
strain at yield
εy
first occurrence in a tensile test of strain increase without a stress increase
Note 1 to entry: Strain at yield is expressed as a percentage (%).
3.11
draw ratio
λ
actual length per unit original length of the gauge
Note 1 to entry: Draw ratio at yield is expressed as a dimensionless ratio.
3.12
strain hardening modulus

p
slope of the Neo-Hookean constitutive model between a draw ratio of 8 and up to the point of maximum
stress but not above 12
Note 1 to entry: Strain hardening modulus is expressed in MPa.
3.13
variation coefficient
C
ν
standard deviation of the test results divided by the arithmetic mean of the test results multiplied by
Note 1 to entry: Variation coefficient is expressed as a percentage (%).
4 Principle
A stress-strain curve is measured at (80 ± 1) °C sufficiently beyond the natural draw ratio and the
...