EN 13763-5:2003

Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes

This European Standard specifies a method for determining the resistance to failure of the plastic materials used in insulation of leading wires of electric detonators, or the tubing of shock tube non-electric detonators, when drawn over a sharp edge under specified loading conditions.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 5: Bestimmung der Widerstandsfähigkeit von Zünderdrähten und Zündschläuchen gegen Schnittbelastung

Explosifs à usage civil - Détonateurs et relais - Partie 5: Détermination de la résistance du fil d'amorçage et du tube à transmission d'ondes de choc aux dommages par coupes

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 5. del: Ugotavljanje odpornosti vodnikov in detonacijskih cevk proti urezu

General Information

• Status: Published
• Publication Date: 04-Nov-2003
• Withdrawal Date: 30-May-2004
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 14-Jul-2015
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13763-5:2004 - Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes

Relations

• Revised: FprEN 13763-5 - Explosives for civil uses - Detonators and detonating cord relays - Part 5: Verification of resistance to cutting damage of leading wires and shock tubes
• Effective Date: 23-Oct-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 5. del: Ugotavljanje odpornosti vodnikov in detonacijskih cevk proti urezuExplosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 5: Bestimmung der Widerstandsfähigkeit von Zünderdrähten und Zündschläuchen gegen SchnittbelastungExplosifs a usage civil - Détonateurs et relais - Partie 5: Détermination de la résistance du fil d'amorçage et du tube a transmission d'ondes de choc aux dommages par coupesExplosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-5:2003SIST EN 13763-5:2004en01-januar-2004SIST EN 13763-5:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-5November 2003ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 5:Determination of resistance to cutting damage of leading wiresand shock tubesExplosifs à usage civil - Détonateurs et relais - Partie 5:Détermination de la résistance du fil d'amorçage et du tubeà transmission d'ondes de choc aux dommages par coupesExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 5: Bestimmung derWiderstandsfähigkeit von Zünderdrähten undZündschläuchen gegen SchnittbelastungThis European Standard was approved by CEN on 7 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-5:2003 E

Range of applicability of the test method.10Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.11
...