CEN/TC 245 - Leisure accommodation vehicles

This European Standard specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in EN 13878, as temporary or seasonal accommodation.
It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a user's handbook.
It also specifies the corresponding test methods.

This document specifies the minimum safety ventilation requirements for leisure accommodation vehicles.
It provides alternative methods of calculation or testing of safety ventilation.

This document defines, in alphabetical order, terms relating to leisure accommodation vehicles (see 3.19) which are caravans (see 3.5), caravan holiday homes (see 3.6) and motor caravans (see 3.24). These terms are used in EN 721, EN 722-1, EN 1645-1, EN 1646-1, EN 1647, EN 1648-1 and EN 1648-2.

This European Standard specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Requirements applicable to road safety are not included in the scope of this European Standard.
This European Standard is applicable exclusively to rigid and rigid folding caravans as defined in EN 13878.

This document specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Specific requirements of this document apply to motor caravans where the overall length multiplied by the overall width does not exceed 13,5 m2 plan area.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to motor caravans as defined in EN 13878.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of caravans. It covers the design and integration of the caravan system with the towing vehicle system.
It does not apply to commercial trailers; nor does it include requirements for ELV road lighting and signalling lamps and their installations, except for safety requirements for the routing of cables in LPG storage compartments.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364 7 721.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans.
It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364 7 721.

This document specifies safety requirements for installing oil-fired heating systems in caravans and caravan holiday homes. It applies to liquid fuel heating systems using oil fuels as defined in EN 13878.
NOTE   Safety ventilation requirements for leisure accommodation vehicles are specified in EN 721.

This document specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in EN 13878, as temporary or seasonal accommodation.
It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a user's handbook.
It also specifies the corresponding test methods.

This document specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to rigid and rigid folding caravans as defined in EN 13878.

This document specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Specific requirements of this document apply to motor caravans where the overall length multiplied by the overall width does not exceed 13,5 m2 plan area.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to motor caravans as defined in EN 13878.

This European Standard specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in EN 13878, as temporary or seasonal accommodation.
It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a user's handbook.
It also specifies the corresponding test methods.

This European standard specifies the method of calculation of minimum user payloads to be allowed for when designing motor caravans.
It also sets out the information relating to user payload to be included in the user's handbook.
It applies to motor caravans as defined in EN 13878.

This European Standard specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in EN 13878, as temporary or seasonal accommodation.
It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a user's handbook.
It also specifies the corresponding test methods.

This document specifies the minimum safety ventilation requirements for leisure accommodation vehicles.
It provides alternative methods of calculation or testing of safety ventilation.

This draft European Standard defines terms relating to leisure accommodation vehicles used in
EN 721, EN 722-1, EN 1645-1,
EN 1645-2, EN 1646-1,
EN 1646-2, EN 1647, EN 1648-1
and EN 1648-2.
NOTE  Leisure accommodation vehicles (see also 3.21) are cara-vans (see 3.5), caravan holiday homes (see 3.6) and motor cara-vans (see 3.26).

This European Standard specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in 3.1, as temporary or seasonal accommodation.
It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a User's Handbook.
It also specifies the corresponding test methods.

This European Standard specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
EN 1645-2 gives requirements relating to user payloads for caravans.
Requirements applicable to road safety are not included in the scope of this European Standard.
This European Standard is applicable exclusively to rigid and rigid folding caravans as defined in EN 13878.

This European Standard specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
However, certain requirements of this European Standard do not apply to motor caravans where the overall length multiplied by the overall width does not exceed 13,5 m2 plan area.
EN 1646-2 gives requirements relating to user payloads for motor caravans.
Requirements applicable to road safety are not included in the scope of this European Standard.
This European Standard is applicable exclusively to motor caravans as defined in EN 13878.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of caravans. It covers the design and integration of the caravan system with the towing vehicle system.
It does not apply to commercial trailers; nor does it include requirements for ELV road lighting and signalling lamps and their installations, except for safety requirements for the routing of cables in LPG storage compartments.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364-7-721.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans.
It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364-7-721 [2].

This European standard specifies the calculation method of user payloads allowed, when designing motor caravans.
It also sets out the information relating to user payload to be included in the user's handbook.
It applies to motor caravans as defined in EN 13878.

This European standard specifies the calculation method of user payloads allowed, when designing caravans.
It also sets out the information relating to user payload to be included in the user's handbook.
It applies to all categories of caravan as defined in EN 13878.

This document specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
However, certain requirements of this standard do not apply to motor caravans where the overall length multiplied by the overall width does not exceed 12 m2 plan area.
EN 1646-2 gives requirements relating to user payloads for motor caravans.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to motor caravans as defined in EN 13878.

This document specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in clause 3, as temporary or seasonal accommodation.
It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a user's handbook.
It also specifies the corresponding test methods.

This document specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
EN 1645 2 gives requirements relating to user payloads for caravans.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to rigid and rigid folding caravans as defined in EN 13878.

This document specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of caravans. It covers the design and integration of the caravan system with the towing vehicle system.
It does not apply to commercial trailers, nor does it include requirements for ELV road lighting and signalling lamps and their installations, except for safety requirements for the routing of cables in LPG storage compartments.
This document also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 384-7-708.S1.

This document specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans.
It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.
This document also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 384-7-708 S1.

This document specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in clause 3, as temporary or seasonal accommodation.
It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a user's handbook.
It also specifies the corresponding test methods.

This document specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
EN 1645 2 gives requirements relating to user payloads for caravans.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to rigid and rigid folding caravans as defined in EN 13878.

This document specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
However, certain requirements of this standard do not apply to motor caravans where the overall length multiplied by the overall width does not exceed 12 m2 plan area.
EN 1646-2 gives requirements relating to user payloads for motor caravans.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to motor caravans as defined in EN 13878.

This European standard specifies the method of calculation of minimum user payloads to be allowed for when designing caravans. It also sets out the information relating to user payload to be included in the user's handbook. It applies to all categories of caravan as defined in EN 27418.

This European standard specifies the method of calculation of minimum user payloads to be allowed for when designing motor caravans. It also sets out the information relating to user payload to be included in the user's handbook. It applies to motor caravans as defined in EN 27418.

UAP of 4 months (TC Res 63/2000) (CC/001117)

UAP of 4 months (TC Res 64/2000) (CC/001117)

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP of 4 months (TC Res 59/1999) (CC/990921)

This European Standard specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation. It also specifies the corresponding test methods. prEN 1645-2 gives requirements relating to user payloads for caravans. Requirements applicable to road safety are not included in the scope of this European Standard. This European Standard is applicable exclusively to rigid and rigid folding caravans as defined in EN 27418.

This European Standard specifies requirements intended to ensure safety and health of persons using caravan holiday homes as defined in clause 3, as temporary or seasonal accommodation. It specifies grades of resistance to snow loads and the stability of the structure of caravan holiday homes as well as the minimum information to be included in a user's handbook. It also specifies the corresponding test methods.

This European Standard specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation. It also specifies the corresponding test methods. However, certain requirements of this standard do not apply to motor caravans where the overall length multiplied by the overall width does not exceed 12 m2 plan area. prEN 1646-2 gives requirements relating to user payloads for motor caravans. Requirements applicable to road safety are not included in the scope of this European Standard.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans. It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of caravans. It covers the design and integration of the caravan system with the towing vehicle system. It does not apply to commercial trailers, nor does it include requirements for ELV road lighting and signalling lamps and their installations.

UAP of 4 months (TC Res 62/2000) (CC/001117)

This European Standard specifies requirements for installing oil-fired heating systems in caravans and mobile homes with reference to safety. It applies to installations using oil fuels as defined in EN 27418.

This European Standard specifies the minimum safety ventilation requirements for leisure accommodation vehicles. It also provides methods of calculation and testing of safety ventilation.