iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1143-1:2012

(Main)

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

This European Standard establishes the basis for testing and classifying free-standing safes, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This European Standard does not cover testing and classifying Deposit Systems and ATM systems.

Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Teil 1: Wertschutzschränke, Wertschutzschränke für Geldautomaten, Wertschutzraumtüren und Wertschutzräume

Auf Grundlage dieser Europäischen Norm werden freistehende Wertschutzschränke, Einbauschränke (Boden
und Wand), Wertschutzschränke für Geldautomaten (ATM-Safes) und ATM-Sockel, Wertschutzraumtüren
sowie Wertschutzräume (mit oder ohne Tür) nach ihrem Widerstandswert gegen Einbruchdiebstahl geprüft
und klassifiziert. Diese Europäische Norm gilt nicht für die Prüfung und Klassifizierung von Deposit-Systemen
und Geldautomaten (ATM-Systemen).

Unités de stockage en lieux sûrs - Prescriptions, classification et méthodes de test pour la résistance à l'effraction - Partie 1: Coffres forts, distributeurs automatiques de billets (DAB), portes fortes et chambres fortes

La présente Norme européenne spécifie les conditions d'essai et de classification des coffres-forts à poser,
encastrés (dans le sol et les murs), les coffres-forts de DAB et les chaises de DAB, les portes fortes et les
chambres fortes (avec ou sans porte) en fonction de leur résistance à l’effraction. La présente Norme européenne
ne couvre pas les essais et la classification des systèmes de dépôt et des systèmes de DAB.

Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - 1. del: Blagajne, bankomatne blagajne, vrata trezorskih prostorov in trezorski prostori

Ta evropski standard določa osnovo za preskušanje in klasifikacijo samostoječih blagajn, vgrajenih blagajn (v tleh ali steni), bankomatnih blagajn in bankomatnih baz, vrat trezorskih prostorov in trezorskih prostorov (z vrati ali brez njih) glede na njihovo protivlomno odpornost. Ta evropski standard ne zajema preskušanja in klasifikacije depozitnih sistemov in bankomatnih sistemov.

General Information

Status
Withdrawn
Publication Date
24-Apr-2012
Withdrawal Date
16-Apr-2019
ICS
13.310 - Protection against crime
Technical Committee
CEN/TC 263 - Secure storage of cash, valuables and data media
Drafting Committee
CEN/TC 263 - Secure storage of cash, valuables and data media
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Apr-2019
Ref Project
SIST EN 1143-1:2012 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

Relations

Replaces
EN 1143-1:2005+A1:2009/AC:2009 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
Effective Date
02-May-2012
Replaces
EN 1143-1:2005+A1:2009 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
Effective Date
02-May-2012
Replaced By
EN 1143-1:2019 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
Effective Date
11-Nov-2015

Buy Standard

EN 1143-1:2012EN 1143-1:2012
PreviousNext
Standard
EN 1143-1:2012
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - 1. del: Blagajne, bankomatne blagajne, vrata trezorskih prostorov in trezorski prostoriWertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Teil 1: Wertschutzschränke, Wertschutzschränke für Geldautomaten, Wertschutzraumtüren und WertschutzräumeUnités de stockage en lieux sûrs - Prescriptions, classification et méthodes de test pour la résistance à l'effraction - Partie 1 : Coffres forts, distributeure automatiques de billets (DAB), portes fortes et chambres fortesSecure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms35.220.99Druge naprave za shranjevanje podatkovOther data storage devices13.310Varstvo pred kriminalomProtection against crimeICS:Ta slovenski standard je istoveten z:EN 1143-1:2012SIST EN 1143-1:2012en,fr,de01-oktober-2012SIST EN 1143-1:2012SLOVENSKI
STANDARDSIST EN 1143-1:2005+A1:2009/AC:2010SIST EN 1143-1:2005+A1:20091DGRPHãþD



SIST EN 1143-1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1143-1
April 2012 ICS 13.310 Supersedes EN 1143-1:2005+A1:2009English Version
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
Unités de stockage en lieux sûrs - Prescriptions, classification et méthodes de test pour la résistance à l'effraction - Partie 1: Coffres forts, distributeurs automatiques de billets (DAB), portes fortes et chambres fortes
Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Teil 1: Wertschutzschränke, Wertschutzschränke für Geldautomaten, Wertschutzraumtüren und Wertschutzräume This European Standard was approved by CEN on 16 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1143-1:2012: ESIST EN 1143-1:2012



EN 1143-1:2012 (E) 2 Contents Page Foreword . 4Introduction . 51Scope . 62Normative references . 63Terms and definitions . 64Classification and requirements . 84.1Classification . 84.2General requirements . 94.2.1Safes, strongroom doors and strongrooms . 94.2.2ATM safes .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14450:2017+A1:2023(Main)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
SIST EN 14450:2018+A1:2024

This document establishes the basis for testing and classifying secure cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1300:2023(Main)
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
SIST EN 1300:2023

This document specifies requirements for high security locks (HSL) for reliability, resistance to burglary and manipulation with methods of testing. It also provides a scheme for classifying HSL in accordance with their assessed resistance to burglary and unauthorized opening.
It is applicable to mechanical and electronic HSL. For electronic locks used in a distributed system, see EN 17646 for further information.
The following features can be included as optional subjects but they are not mandatory:
a)   recognized code for preventing code altering and/or enabling/disabling parallel codes;
b)   recognized code for disabling time set up;
c)   integration of alarm components or functions;
d)   resistance to attacks with acids;
e)   resistance to X-rays;
f)   resistance to explosives;
g)   time functions.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15713:2023(Main)
Secure destruction of confidential and sensitive material - Code of practice
SIST EN 15713:2023

This document provides recommendations and requirements for the procedures, processes and performance monitoring to be implemented for the management and control of the physical destruction of confidential and sensitive material to ensure that such material is disposed of securely and safely.
This document can be referenced by anyone who processes such material on behalf of others and covers the following scenarios:
-   on site - using mobile equipment at the location of use (destruction equipment is brought to the confidential or sensitive material);
-   off site - transport followed by destruction using equipment at a destruction facility (the confidential or sensitive material is brought to the destruction equipment, such as used at a dedicated external facility operated by a service provider);
-   use of equipment at the Data Controller’s location (confidential or sensitive material and destruction equipment co-located, such as a shredder in a building occupied by a client or clients).
Destruction by erasure (e.g. crypto erasure, data overwriting, degaussing or other forms of magnetic/electronic erasure) is not covered in this document.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17646:2022(Main)
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening - Distributed systems
SIST EN 17646:2022

This document is applicable to Distributed Systems (DS), i.e. high security locks with components which have a wired or wireless connection via a transmission system in order to execute fixed operating conditions using different individually fixed access possibilities.
Products which are to be tested on the basis of this document comply with the generally recognized state of the art at the time of testing. Due to the short innovation cycles in the field of electronic and, in particular, information technology applications, the technical possibilities available at the time of product development should also be taken into account during implementation.
Distributed systems can be used, for example, to operate high security locks of secure storage units (safes and strongrooms).
High security locks (HSL) are used in DS as locking unit.
This document does not apply for stand-alone HSL, which are not part of a distributed system. For these stand-alone HSL EN 1300 is applicable only.
The document will be revised with a frequency of 3 years as the research in the area of cryptography and relevant attacks evolve with high speed as well as the referenced standards.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1047-1:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and data inserts
SIST EN 1047-1:2019

This document specifies requirements for fire resisting data cabinets and diskette inserts.
Two methods of test are specified to determine the ability of fire resisting data cabinets to protect temperature and humidity sensitive contents from the effects of fire: a fire endurance test and a fire shock and impact test. Two levels of fire severity (S 60 and S 120) based upon time of fire exposure; and three protection classes (P, D and DIS) are specified using the maximum temperature increases and humidity values permitted within the storage space of the data cabinet.
Diskette inserts (DI 60 P/DIS and DI 120 P/DIS) are installed in data cabinets of protection class S 60 P or S 120 P, respectively, and subjected to a fire endurance test (see 5.1.2).
Requirements are also specified for test specimens, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the fire resisting data cabinets and diskette inserts from the test results is also given (see Table 1).
Diskette inserts are only installed in data cabinets having the same design as the series of protection class S 60 P and S 120 P, respectively, in which the insert has been tested in using methods defined in 5.1.2. Where several inserts are installed, they are built in one beside the other or one above the other from bottom to top, respectively. The volume and total height of the installed inserts do not exceed 50 % of the total internal volume or 50 % of the internal height, respectively, of the data cabinets into which they are installed. The dimensions of the insert can be adapted by increasing the width and depth to the corresponding dimensions of the data cabinets. A reduction of these dimensions as well as a change of the height is only admitted within the specified tolerance.
The temperature increases during type-tests on data cabinets and diskette inserts will be considered in deciding the permitted diskette insert installations. For a permitted installation, the temperature increase of the intended data cabinet ( ) does not exceed the temperature increase of the tested data cabinet ( ) in which the diskette insert has been type-tested by more than the difference between the maximum value for the diskette insert ( ) and the maximum admissible temperature increase (30 K), i.e   (See example in Annex B).
A description of the installation of the diskette inserts can be given in the technical documentation of the manufacturer.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15659:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
SIST EN 15659:2019

This document specifies requirements for light fire storage units providing protection against fire.
The method of test is specified to determine the ability of light fire storage units to protect paper media from the effects of fire. Two levels of fire exposure periods (LFS 30 and LFS 60) are specified using the maximum temperature increase permitted within the storage space of the light fire storage unit.
Protection after the fire exposure of 30 min (LFS 30) or 60 min (LFS 60) is not ensured by this document, but by European Standard EN 1047-1. Requirements are also specified for the test specimen, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the light fire storage units from the test results is also given (see Table 1).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1143-1:2019(Main)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
SIST EN 1143-1:2019

This European Standard establishes the basis for testing and classifying free-standing safes, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This European Standard does not cover testing and classifying Deposit Systems and ATM systems.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1047-2:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
SIST EN 1047-2:2019

This part of the European Standard EN 1047 specifies requirements for data rooms and data containers. It includes a method of test for the determination of the ability of data rooms and data containers to protect temperature and humidity sensitive data media (see 3.5) and hardware systems (see 3.6) from the effects of fire. A test method for measuring the resistance to mechanical stress (impact test) provided by data rooms type B and data containers is also specified.
Requirements are also specified for test specimens, the technical documentation of the test specimens, materials specimens, physical fittings, the correlation of test specimens with the technical documentation and the preparation for type testing, as test procedures as well as the series production.
In addition, a scheme to classify data rooms and data containers from the test results is given (see Table 1).
As well as providing protection against fire, correctly installed data rooms and data containers offer a defined protection against impacts caused by failure during fire of components and objects external to the data room or data container.
Data rooms and data containers having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, lockings, doors, etc.) will only be given the same protection classification as that of the test specimen if the tolerances are within the ranges specified in Clause 7.
NOTE   This European Standard does not regulate the use of data rooms in the meaning of the building laws of the respective countries. In the construction of data rooms, it is advised to consider the respective national requirements.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1143-2:2014(Main)
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
SIST EN 1143-2:2014

This European Standard specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits.
This European Standard comprises two types of deposit system:
-   Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe.
-   Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this European Standard is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company.
NOTE   Parts of a deposit system are a receiving unit, an input unit and in some cases, a chute.
This European Standard includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this standard.
Deposit systems may have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included.
This European Standard does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 1143-2(Main)
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
kSIST FprEN 1143-2:2024

This document specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits.
This document comprises two types of deposit system:
—   Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe.
—   Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this document is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company.
NOTE   Parts of a deposit system are a receiving unit, an input unit and in some cases, a chute.
This document includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this document.
Deposit systems can have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included.
This document does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day