Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)

This document specifies requirements for classification of solid wires and rods for fusion welding of copper and copper alloys. The classification of the solid wires and rods is based on their chemical composition.

Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und Kupferlegierungen - Einteilung (ISO 24373:2018)

Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre - Classification (ISO 24373:2018)

Le présent document spécifie les exigences relatives à la classification des fils pleins et des baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre. La classification des fils pleins et des baguettes pleines est basée sur leur composition chimique.

Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in bakrovih zlitin - Razvrstitev (ISO 24373:2018)

Ta dokument določa zahteve za razvrstitev masivnih žic in palic za talilno varjenje bakra in bakrovih zlitin. Razvrstitev masivnih žic in palic temelji na kemijski sestavi.

General Information

Status
Published
Publication Date
18-Sep-2018
Withdrawal Date
30-Mar-2019
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Sep-2018
Completion Date
19-Sep-2018

Relations

Buy Standard

Standard
EN ISO 24373:2018
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 24373:2017
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24373:2018
01-november-2018
1DGRPHãþD
SIST EN ISO 24373:2012
Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in
bakrovih zlitin - Razvrstitev (ISO 24373:2018)
Welding consumables - Solid wires and rods for fusion welding of copper and copper
alloys - Classification (ISO 24373:2018)
Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und
Kupferlegierungen - Einteilung (ISO 24373:2018)
Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le
soudage par fusion du cuivre et des alliages de cuivre - Classification (ISO 24373:2018)
Ta slovenski standard je istoveten z: EN ISO 24373:2018
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.30 Baker in bakrove zlitine Copper and copper alloys
SIST EN ISO 24373:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 24373:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 24373:2018


EN ISO 24373
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 25.160.20 Supersedes EN ISO 24373:2009
English Version

Welding consumables - Solid wires and rods for fusion
welding of copper and copper alloys - Classification (ISO
24373:2018)
Produits consommables pour le soudage - Fils pleins et Schweißzusätze - Massivdrähte und -stäbe zum
baguettes pleines pour le soudage par fusion du cuivre Schmelzschweißen von Kupfer und Kupferlegierungen
et des alliages de cuivre - Classification (ISO - Einteilung (ISO 24373:2018)
24373:2018)
This European Standard was approved by CEN on 11 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24373:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 24373:2018
EN ISO 24373:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 24373:2018
EN ISO 24373:2018 (E)
European foreword
This document (EN ISO 24373:2018) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 24373:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 24373:2018 has been approved by CEN as EN ISO 24373:2018 withou
...

SLOVENSKI STANDARD
oSIST prEN ISO 24373:2017
01-februar-2017
Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in
bakrovih zlitin - Razvrstitev (ISO/DIS 24373:2016)
Welding consumables - Solid wires and rods for fusion welding of copper and copper
alloys - Classification (ISO/DIS 24373:2016)
Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le
soudage par fusion du cuivre et des alliages de cuivre - Classification (ISO/DIS
24373:2016)
Ta slovenski standard je istoveten z: prEN ISO 24373
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.30 Baker in bakrove zlitine Copper and copper alloys
oSIST prEN ISO 24373:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 24373:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 24373:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 24373
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
2016-12-30 2017-03-23
Welding consumables — Solid wires and rods for fusion
welding of copper and copper alloys — Classification
Produits consommables pour le soudage — Fils pleins et baguettes pleines pour le soudage par fusion du
cuivre et des alliages de cuivre — Classification
ICS: 25.160.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 24373:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

---------------------- Page: 3 ----------------------
oSIST prEN ISO 24373:2017
ISO/DIS 24373:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 24373:2017
ISO/DIS 24373:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 1
5 Symbols . 1
5.1 Symbol for the product form . 1
5.2 Symbol for the chemical composition .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.