EN ISO 11376:2001

Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine (ISO 11376:1997)

Kunststoffe - Epoxidharze und Glycidylester - Bestimmung von anorganischem Chlor (ISO 11376:1997)

Diese Internationale Norm legt ein direktes potentiometrisches Verfahren für die Bestimmung von anorganischem Chlor in Epoxidharzen und Glycidylestern fest, das auch als ¿anorganisches Chlor" oder ¿ionisches Chlor" bezeichnet wird.

Plastiques - Résines époxydes et esters glycidiques - Dosage du chlore inorganique (ISO 11376:1997)

La CEI 60317-49:2012 spécifie les exigences relatives au fil de bobinage en cuivre nu ou émaillé de grade 1 ou de grade 2 recouvert d'un guipage de fibres de verre imprégnées de résine ou de vernis, indice de température 180. Le produit d'imprégnation peut être par exemple une résine de base polyester ou polyesterimide. Pour ce type de fil, l'essai de choc thermique n'est pas approprié et c'est la raison pour laquelle, il n'est pas possible d'établir une température de choc thermique. Par conséquent, il n'est pas possible de spécifier une classe fondée sur les exigences d'indice de température et de température de choc thermique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- ajout d'exigences sur l'aspect, nouveau paragraphe 3.3 et
- ajout d'exigences sur la détection des micro-fissures, Article 23, Détection des microfissures.
Mots clé: fil de bobinage en cuivre
Cette publication doit être lue conjointement avec la CEI 60317-0-6:2001.
Le contenu du corrigendum de janvier 2013 a été pris en considération dans cet exemplaire.

Polimerni materiali - Epoksidne smole in glicidil estri - Določevanje anorganskega klora (ISO 11376:1997)

General Information

• Status: Withdrawn
• Publication Date: 21-Aug-2001
• Withdrawal Date: 25-Nov-2003
• ICS: 83.080.10 - Thermosetting materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-Nov-2003
• Completion Date: 26-Nov-2003
• Ref Project: SIST EN ISO 11376:2002 - Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine (ISO 11376:1997)

Relations

• Replaced By: EN ISO 21627-1:2003 - Plastics - Epoxy resins - Determination of chlorine content Part 1: Inorganic chlorine (ISO 21627-1:2002)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11376:2002
01-februar-2002
3ROLPHUQLPDWHULDOL(SRNVLGQHVPROHLQJOLFLGLOHVWUL'RORþHYDQMHDQRUJDQVNHJD
NORUD,62
Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine (ISO
11376:1997)
Kunststoffe - Epoxidharze und Glycidylester - Bestimmung von anorganischem Chlor
(ISO 11376:1997)
Plastiques - Résines époxydes et esters glycidiques - Dosage du chlore inorganique
(ISO 11376:1997)
Ta slovenski standard je istoveten z: EN ISO 11376:2001
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 11376:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11376:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 11376:2002
EUROPEAN STANDARD
EN ISO 11376
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 08.008.10
English version
Plastics - Epoxy resins and glycidyl esters - Determination of
inorganic chlorine (ISO 11376:1997)
Plastiques - Résines époxydes et esters glycidiques - Kunststoffe - Epoxidharze und Glycidylester - Bestimmung
Dosage du chlore inorganique (ISO 11376:1997) von anorganischem Chlor (ISO 11376:1997)
This European Standard was approved by CEN on 11 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11376:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11376:2002
EN ISO 11376:2001 (E)
CORRECTED  2002-02-06
Foreword
The text of the International Standard from Technical Committee ISO/TC 61 "Plastics" of the
International Organization for Standardization (ISO) has been taken over as a European
Standard by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by
IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by February 2002, and conflicting national
standards shall be withdrawn at the latest by February 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 11376:1997 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11376:2002
EN ISO 11376:2001 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3696 1987 Water for analytical laboratory use - EN ISO 3696 1995
Specification and test methods
3

---------------------- Page: 5 ----------------------

SIST EN ISO 11376:2002

---------------------- Page: 6 ----------------------

SIST EN ISO 11376:2002
IS0
INTERNATIONAL
11376
STANDARD
First edition
1997-06-o 1
Plastics - Epoxy resins and glycidyl
Determination of inorganic
esters -
chlorine
Plastiques - Msines bpoxydes et esters glycidiques - Dosage du chlore
inorganique
Reference number
IS0 11376:1997(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 11376:2002
IS0 11376: 1997(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 11376 was prepared by Technical Committee
ISOnC 61, Plastics, Subcommittee SC 12, Thermosetting materids.
This International Standard cancels and replaces IS0 4573:1978, of which
it constitutes a technical revision.
0 IS0 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l Cl-l-121 1 Geneve 20 l Switzerland
Internet central @ iso.ch
x.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

--
...