EN 16602-20:2014

Space product assurance - Quality assurance

This Standard defines the quality assurance (QA) requirements for the establishment and implementation of a Quality Assurance programme for products of space projects.
Discipline related qualification activities are complemented in standards specific to those disciplines (e.g. ECSS-E-ST-32-01 for fracture control).
For software quality assurance, the software product assurance standard, ECSS-Q-ST-80 is applicable.
This Standard is applicable to all space projects.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
For the tailoring of this standard the following information is provided:
•   A table providing the pre-tailoring per “Product types” in clause 6
•   A table providing the pre-tailoring per “Project phase” in Annex J

Raumfahrtproduktsicherung - Qualitätssicherung

Assurance produit des projets spatiaux - Assurance qualité

Zagotavljanje varnih proizvodov v vesoljski tehniki - Zagotavljanje kakovosti

Standard EN 16602-20 določa zahteve za zagotavljanje kakovosti (QA) za vzpostavitev in izvajanje programa za zagotavljanje kakovosti izdelkov za vesoljske projekte. Dejavnosti, povezane z usposobljenostjo za določene discipline, so dopolnjene v standardih, ki so značilni za te discipline (npr. ECSS-E-ST-32-01 za kontrolo razpok). Za zagotavljanje kakovosti programske opreme velja standard ECSS-Q-ST-80. Ta standard se uporablja za vse vesoljske projekte. Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00. Za prilagajanje tega standarda so na voljo naslednji podatki: • preglednica, ki ponuja vnaprejšnje prilagoditve glede na »vrste izdelkov« v točki 6, • preglednica, ki ponuja vnaprejšnje prilagoditve glede na »fazo projekta« v Dodatku J.

General Information

• Status: Withdrawn
• Publication Date: 16-Sep-2014
• Withdrawal Date: 17-Mar-2020
• ICS: 49.140 - Space systems and operations
• Technical Committee: CEN/CLC/TC 5 - Space
• Drafting Committee: CEN/CLC/TC 5 - Space
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Mar-2020
• Mandate: M/496 - Mandate addressed to CEN, CENELEC and ETSI to develop standardisation regarding space industry (Phase 3 of the process)
• Ref Project: SIST EN 16602-20:2014 - Space product assurance - Quality assurance

Relations

• Replaces: EN 13291-2:2003 - Space product assurance - General requirements - Part 2: Quality assurance
• Effective Date: 24-Sep-2014
• Replaced By: EN 16602-20:2020 - Space product assurance - Quality assurance
• Effective Date: 18-Oct-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zagotavljanje varnih proizvodov v vesoljski tehniki - Zagotavljanje kakovostiRaumfahrtproduktsicherung - QualitätssicherungAssurance produit des projets spatiaux - Assurance qualitéSpace product assurance - Quality assurance49.140Vesoljski sistemi in operacijeSpace systems and operations03.120.99Drugi standardi v zvezi s kakovostjoOther standards related to qualityICS:Ta slovenski standard je istoveten z:EN 16602-20:2014SIST EN 16602-20:2014en,fr,de01-november-2014SIST EN 16602-20:2014SLOVENSKI
STANDARDSIST EN 13291-2:20041DGRPHãþD



SIST EN 16602-20:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16602-20
September 2014 ICS 49.140
Supersedes EN 13291-2:2003
English version
Space product assurance - Quality assurance
Assurance produit des projets spatiaux - Assurance qualité
Raumfahrtproduktsicherung - Qualitätssicherung This European Standard was approved by CEN on 6 March 2014.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 16602-20:2014 E
SIST EN 16602-20:2014



EN 16602-20:2014 (E) 2 Table of contents Foreword . 5 1 Scope . 6 2 Normative references . 7 3 Terms and definitions . 8 3.1 Terms from other standards . 8 3.2 Terms specific to the present standard . 8 3.3 Abbreviated terms and symbols . 10 3.4 Nomenclature . 11 4 Quality assurance principles . 12 4.1 QA management principles . 12 4.2 General principles . 12 4.3 Design and verification principles . 12 4.4 Procurement principles . 13 4.5 Manufacturing, assembly and integration principles . 13 4.6 Testing principles . 13 4.7 Acceptance and delivery principles . 13 4.8 GSE principles . 13 5 Quality assurance requirements . 14 5.1 QA management requirements . 14 5.1.1 Quality assurance plan . 14 5.1.2 Personnel training and certification . 14 5.2 QA general requirements .
...