EN ISO 19101:2005
(Main)Geographic information - Reference model (ISO 19101:2002)
Geographic information - Reference model (ISO 19101:2002)
This International Standard defines the framework for standardization in the field of geographic information and sets forth the basic principles by which this standardization takes place.
This framework identifies the scope of the standardization activity being undertaken and the context in which it takes place. The framework provides the method by which what is to be standardized can be determined and describes how the contents of the standards are related.
Although structured in the context of information technology and information technology standards, this International Standard is independent of any application development method or technology implementation approach.
Geoinformation - Referenzmodell (ISO 19101:2002)
Information géographique - Modèle de réference (ISO 19101:2002)
Geografske informacije - Referenčni model (ISO 19101:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2005
*HRJUDIVNHLQIRUPDFLMH5HIHUHQþQLPRGHO ,62
Geographic information - Reference model (ISO 19101:2002)
Geoinformation - Referenzmodell (ISO 19101:2002)
Information géographique - Modele de réference (ISO 19101:2002)
Ta slovenski standard je istoveten z: EN ISO 19101:2005
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 19101
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 35.240.70
English version
Geographic information - Reference model (ISO 19101:2002)
Information géographique - Modèle de réference (ISO Geoinformation - Referenzmodell (ISO 19101:2002)
19101:2002)
This European Standard was approved by CEN on 24 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19101:2005: E
worldwide for CEN national Members.
Foreword
The text of ISO 19101:2002 has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics” of the International Organization for Standardization (ISO)
and has been taken over as EN ISO 19101:2005 by Technical Committee CEN/TC 287
"Geographic Information", the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2005, and conflicting national standards
shall be withdrawn at the latest by July 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 19101:2002 has been approved by CEN as EN ISO 19101:2005 without any
modifications.
INTERNATIONAL ISO
STANDARD 19101
First edition
2002-07-01
Geographic information — Reference
model
Information géographique — Modèle de référence
Reference number
ISO 19101:2002(E)
©
ISO 2002
ISO 19101:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved
ISO 19101:2002(E)
Contents
Foreword.v
Introduction.vi
1 Scope .1
2 Conformance.1
3 Normative references.1
4 Terms and definitions .1
5 Symbols and abbreviated terms .4
5.1 Abbreviations.4
5.2 UML notation.5
6 Concepts and organization of the reference model.5
6.1 Integration of geographic information with information technology.5
6.2 Focus of standardization in the ISO 19100 series of geographic information standards .7
6.3 Reference model organization .7
6.4 Interoperability of geographic information.8
6.4.1 Definition of interoperability.8
6.4.2 Aspects of interoperability .9
6.4.3 Interoperability in the ISO 19100 series of geographic standards .9
7 Conceptual modelling .10
7.1 Content of this clause .10
7.2 Definition of conceptual modelling.10
7.3 Use of this clause .11
7.4 Specification of conceptual schema language for the ISO 19100 series of geographic
information standards.11
7.5 The approach to conceptual modelling.11
7.6 Principles of conceptual modelling .12
7.7 Model integration.13
8 The Domain reference model .13
8.1 Content of this clause .13
8.2 Definition of Domain reference model.13
8.3 Uses of the Domain reference model .14
8.4 Overview of the Domain Reference model .14
8.5 Use of abstraction levels in the Domain reference model .16
8.6 Detailed description of the Domain reference model .17
8.6.1 Introduction.17
8.6.2 Application schema.17
8.6.3 Spatial objects and position.19
8.6.4 Reference systems.20
8.6.5 Quality.22
8.6.6 Metadata .23
8.6.7 General feature model.24
9 The Architectural reference model .25
9.1 Content of this clause .25
9.2 Definition of the Architectural reference model .26
9.3 Uses of the Architectural reference model .26
9.4 Overview of the Architectural reference model.26
9.4.1 Introduction.26
9.4.2 Services and service interfaces .26
9.4.3 Identifying services and service interfaces for geographic information.28
ISO 19101:2002(E)
9.5 Types of geographic information services .28
9.5.1 Introduction.28
9.5.2 Types of information technology services relevant to geographic information.28
9.5.3 Extension of service types for geographic information .30
9.5.4 Service types in the ISO 19100 series compared to other service models .30
9.6 Service interfaces and standardization requirements.30
9.6.1 Introduction.30
9.6.2 Identifying standardization requirements for geographic information services .31
9.6.3 Fulfilling standardization requirements and the role of profiles .32
9.6.4 Elaboration of standardization requirements .32
9.6.5 Using this procedure to identify requirements for geographic information standards.33
10 Profiles and functional standards.34
10.1 Content of this clause .34
10.2 Profiles and base standards.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.