iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1382:1999

(Main)

Timber structures - Test methods - Withdrawal capacity of timber fasteners

Timber structures - Test methods - Withdrawal capacity of timber fasteners

This European Standard specifies the test method for determining the withdrawal capacity of fasteners which have been inserted into timber (solid timber and glued laminated timber). The test method applies to all types of nails, screws and staples.

Holzbauwerke - Prüfverfahren - Ausziehtragfähigkeit von Holzverbindungsmitteln

In der vorliegenden Norm wird ein Prüfverfahren zur Bestimmung der Außiehtragfähigkeit von Verbindungsmitteln festgelegt, die in Holz (Vollholz und Brettschichtholz) eingeschlagen wurden. Das Prüfverfahren gilt für alle Typen von Nägeln, Schrauben und Klammern.

Structures en bois - Méthodes d'essai - Résistance à l'arrachement dans le bois d'éléments de fixation

La présente norme définit les méthodes d'essai permettant de déterminer la résistance à l'arrachement d'éléments de fixation insérés dans du bois (bois massif et bois lamellé-collé). Les méthodes d'essai s'appliquent à tous les types de pointes, de vis et d'agrafes.

Lesene konstrukcije - Metode preskušanja - Izvlečna nosilnost veznih sredstev za les

General Information

Status
Withdrawn
Publication Date
17-Aug-1999
Withdrawal Date
16-Feb-2016
ICS
91.080.20 - Timber structures
Technical Committee
CEN/TC 124 - Timber structures
Drafting Committee
CEN/TC 124/WG 1 - Test methods
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Feb-2016
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 1382:2000 - Timber structures - Test methods - Withdrawal capacity of timber fasteners

Relations

Replaced By
EN 1382:2016 - Timber Structures - Test methods - Withdrawal capacity of timber fasteners
Effective Date
24-Feb-2016

Buy Standard

EN 1382:2000EN 1382:2000
PreviousNext
Standard
EN 1382:2000
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OHVHolzbauwerke - Prüfverfahren - Ausziehtragfähigkeit von HolzverbindungsmittelnStructures en bois - Méthodes d'essai - Résistance a l'arrachement dans le bois d'éléments de fixationTimber structures - Test methods - Withdrawal capacity of timber fasteners91.080.20Lesene
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14592:2022(Main)
Timber structures - Dowel-type fasteners - Requirements
SIST EN 14592:2022

This document specifies the characteristics of the following types of dowel-type fasteners:
-   nails;
-   staples;
-   screws;
-   dowels;
-   bolts with nuts.
This document covers dowel-type fasteners for structural use in load bearing timber structures only. This document covers also the following additional intended uses of the screws:
-   to fix roof or cladding elements to the timber structure, with or without insulation layers; and
-   as reinforcement inserted in timber or in a glue laminated timber element to improve its resistance to compression perpendicular to the grain.
This document covers types of dowel-type fasteners, which are manufactured of either carbon steel or stainless steel and which may be coated for the following purposes:
-   corrosion protection (as Type 1 coating);
-   lubrication, to facilitate insertion (as Type 2 coating);
-   withdrawal enhancement and/or collation for nails and staples (adhesive and/or resin coatings) (as Type 3 coating).
This document covers types of dowel-type fasteners, which are manufactured from materials and within the specifications for their geometry related properties, only as they are specified for:
-   nails (see G.1);
-   staples (see G.2);
-   screws (see G.3);
-   dowels (see G.4); and
-   bolts with nuts (see G.5).
This document specifies also the assessment and verification of constancy of performance (AVCP) procedures of these characteristics and includes provisions for marking of dowel-type fasteners.
This document does not cover dowel-type fasteners treated with fire retardants to improve their fire performance, nor does it cover glued-in rods.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8970:2020(Main)
Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020)
SIST EN ISO 8970:2020

This document specifies a method based on density, for the selection of pieces of wood used in determining the strength and stiffness properties of joints between members of structural timber made with mechanical fasteners. It is intended to be used in conjunction with a test standard specifying a test method.
It is assumed that the wood pieces are conditioned to the relevant conditions, that the wood density is normally distributed and that any deviations are reported.
This document is applicable only to specimens of structural timber.
NOTE    It is emphasized that the wood density is only one of the properties that can influence the strength of a joint. Other relevant properties are, for example, growth-ring size and orientation, toughness and hardness.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16929:2018(Main)
Test methods - Timber floors - Determination of vibration properties
SIST EN 16929:2019

This document specifies test methods for the determination of natural frequencies, damping, unit point load deflection and acceleration of floors composed of sawn timber, engineered wood products, and mass timber beams or slabs (e.g. cross laminated timber CLT, glued laminated timber GL, nail laminated timber), with or without concrete screeds, as well as for timber-concrete composite floors.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16784:2016(Main)
Timber structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
SIST EN 16784:2016

This European Standard specifies a test method for the determination of the long duration withdrawal strength of coated and uncoated dowel-type fasteners in structural timber and timber products and wood based products for structural application.
The method applies to all types of nails, screws and staples.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14358:2016(Main)
Timber structures - Calculation and verification of characteristic values
SIST EN 14358:2016

This standard gives statistical methods for the determination of characteristic values from test results on a sample drawn from a clearly defined reference population of e.g. solid wood, fasteners, connectors and wood-based products. The characteristic value is an estimate of the property of the reference population and can be based on a 5-percentile value of strength, resistance or density as well as on a mean value for stiffness.
Parametric methods are given for the determination of lower and upper 5-percentiles. The upper 5-percentile is the 95-percentile.
This standard is suitable for use with any structural product in the frame of type testing as well as factory production control.
Sampling is not covered by this document, but reference is made to the relevant product standards.
This standard also provides the acceptance procedure for verification of a lot.
Depending on the product, characteristic values determined in accordance with this standard may be used directly or may need additional adjustments specified in the relevant product standards.
Note:   For example, in the case of solid timber, specific adjustment factors for calculation of characteristic values are given in EN 384.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1383:2016(Main)
Timber structures - Test methods - Pull through resistance of timber fasteners
SIST EN 1383:2016

This European Standard specifies the test method for determining the resistance of timber to the head pull through of timber fasteners.
In this standard 'timber' includes solid timber, glued laminated timber and wood-based products.
The test method applies to all types of nails, screws and staples excluding screws with fully threaded shank.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1382:2016(Main)
Timber Structures - Test methods - Withdrawal capacity of timber fasteners
SIST EN 1382:2016

This European Standard specifies the test method for determining the withdrawal capacity of fasteners which have been inserted into timber (solid timber, LVL, CLT and glued laminated timber).
The test method applies to all types of nails, screws and staples.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1381:2016(Main)
Timber structures - Test methods - Load bearing stapled joints
SIST EN 1381:2016

This European Standard specifies test methods for determining the strength and deformation characteristics of stapled joints in load-bearing timber structures.
The methods assess joints with members of timber (solid timber and glued laminated timber) or wood-based products in the combination proposed for use in service and using all types of staples up to 3 mm diameter for circular cross-section staples or 4 mm x 2 mm for rectangular or oval cross-section staples.
The methods determine load-slip characteristics and maximum load of joints with laterally loaded staples where various angles between the applied force and the timber grain direction or the main direction of the wood-based products, respectively, are possible.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1075:2014(Main)
Timber structures - Test methods - Joints made with punched metal plate fasteners
SIST EN 1075:2015

This European Standard specifies the test methods for determining the strength capacity and stiffness of joints made with punched metal plate fasteners in load bearing timber structures, being used to join two or more pieces of timber of the same thickness in the same plane. The properties measured are:
-   load-slip characteristics and maximum load resulting from the lateral resistance of the embedded projections, at various angles between the direction of the applied force and;
-   the axis of the fastener (load-fastener angle );
-   the direction of the grain of the timber (load-grain angle β);
-   the tension capacity of the fastener at various angles ;
-   the compression capacity of the fastener at various angles ;
-   the shear capacity of the fastener at various angles ..
A nail root test method is shown in Annex A.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 408:2010+A1:2012(Main + Amendment)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
SIST EN 408:2010+A1:2012

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength.
In addition, the determination of dimensions, moisture content, and density of test pieces are specified.
The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber unless stated otherwise.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day