iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14067-5:2021/AC:2023

(Corrigendum)

Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels

Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels

Bahnanwendungen - Aerodynamik - Teil 5: Anforderungen und Prüfverfahren für Aerodynamik im Tunnel

Applications ferroviaires - Aérodynamique - Partie 5 : Exigences et procédures d'essai pour l'aérodynamique en tunnel

Železniške naprave - Aerodinamika - 5. del: Zahteve in ugotavljanje skladnosti pri aerodinamiki v predorih - Popravek AC

General Information

Status
Published
Publication Date
10-Jan-2023
ICS
45.060.01 - Railway rolling stock in general
93.060 - Tunnel construction
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 6 - Aerodynamics
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Jan-2023
Completion Date
11-Jan-2023
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
Ref Project
SIST EN 14067-5:2022/AC:2023 - Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels

Relations

Corrects
EN 14067-5:2021 - Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels
Effective Date
23-Nov-2022

Buy Standard

EN 14067-5:2022/AC:2023EN 14067-5:2022/AC:2023
PreviousNext
Corrigendum
EN 14067-5:2022/AC:2023
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14067-5:2022/AC:2023
01-marec-2023
Železniške naprave - Aerodinamika - 5. del: Zahteve in ugotavljanje skladnosti pri
aerodinamiki v predorih - Popravek AC
Railway applications - Aerodynamics - Part 5: Requirements and assessment
procedures for aerodynamics in tunnels
Bahnanwendungen - Aerodynamik - Teil 5: Anforderungen und Prüfverfahren für
Aerodynamik im Tunnel
Applications ferroviaires - Aérodynamique - Partie 5 : Exigences et procédures d'essai
pour l'aérodynamique en tunnel
Ta slovenski standard je istoveten z: EN 14067-5:2021/AC:2023
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
93.060 Gradnja predorov Tunnel construction
SIST EN 14067-5:2022/AC:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14067-5:2022/AC:2023

---------------------- Page: 2 ----------------------
SIST EN 14067-5:2022/AC:2023


EN 14067-5:2021/AC
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2023
EUROPÄISCHE NORM
ICS 45.060.01; 93.060 Supersedes EN 14067-5:2006+A1:2010
English Version

Railway applications - Aerodynamics - Part 5:
Requirements and assessment procedures for
aerodynamics in tunnels
Applications ferroviaires - Aérodynamique - Partie 5 : Bahnanwendungen - Aerodynamik - Teil 5:
Exigences et procédures d'essai pour l'aérodynamique Anforderungen und Prüfverfahren für Aerodynamik im
en tunnel Tunnel




This corrigendum becomes effective on 11 January 2023 for incorporation in the official English
version of the EN.



EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14067-5:2021(Main)
Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels
SIST EN 14067-5:2022

This document establishes aerodynamic requirements, test procedures, assessment methods and acceptance criteria for operating rolling stock in tunnels. Aerodynamic pressure variations, loads, micro pressure wave generation and further aerodynamic aspects to be expected in tunnel operation are addressed in this document. Requirements for the aerodynamic design of rolling stock and tunnels of the heavy rail system are provided. The requirements apply to heavy rail systems only.

  • Standard
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 14067-5(Main)
Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels
oSIST prEN 14067-5:2018

This document establishes requirements, test procedures, assessment methods and acceptance criteria for aerodynamics in tunnels and rolling stock in tunnels. Topics of aerodynamic pressures and loadings, aerodynamic resistance and micro-pressure waves are addressed.
Requirements for rolling stock with operating speeds equal to or above 200 km/h are provided for pressures generated in tunnel operation. Requirements for infrastructure with design speeds above 160 km/h or high blockage ratio or tunnels longer than 12 km are provided for pressures generated in tunnel operation. These requirements are not applicable to light rail and urban rail.
This document is applicable to all railway vehicles and infrastructure with track gauges from 1 435 mm to 1 668 mm inclusive.

  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14067-5:2006/FprA1(Amendment)
Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels
SIST EN 14067-5:2007/kFprA1:2010

This European Standard applies to the aerodynamic loading caused by trains running in a tunnel.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14067-5:2021(Main)
Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels
SIST EN 14067-5:2022

This document establishes aerodynamic requirements, test procedures, assessment methods and acceptance criteria for operating rolling stock in tunnels. Aerodynamic pressure variations, loads, micro pressure wave generation and further aerodynamic aspects to be expected in tunnel operation are addressed in this document. Requirements for the aerodynamic design of rolling stock and tunnels of the heavy rail system are provided. The requirements apply to heavy rail systems only.

  • Standard
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 14067-5(Main)
Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels
oSIST prEN 14067-5:2018

This document establishes requirements, test procedures, assessment methods and acceptance criteria for aerodynamics in tunnels and rolling stock in tunnels. Topics of aerodynamic pressures and loadings, aerodynamic resistance and micro-pressure waves are addressed.
Requirements for rolling stock with operating speeds equal to or above 200 km/h are provided for pressures generated in tunnel operation. Requirements for infrastructure with design speeds above 160 km/h or high blockage ratio or tunnels longer than 12 km are provided for pressures generated in tunnel operation. These requirements are not applicable to light rail and urban rail.
This document is applicable to all railway vehicles and infrastructure with track gauges from 1 435 mm to 1 668 mm inclusive.

  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14067-5:2006/FprA1(Amendment)
Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels
SIST EN 14067-5:2007/kFprA1:2010

This European Standard applies to the aerodynamic loading caused by trains running in a tunnel.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day