EN 13482:2001

Rubber hoses and hose assemblies for asphalt and bitumen - Specification

This European standard specifies requirements for two types of hose and hose assembly identified by their maximum working pressures and main use i.e. Type 1 is for road and rail tanker use and Type 2 is for dockside use. The types can be further divided into two classes related to the maximum temperature of the product to be conveyed. The hose constructions may be smooth or rough bore.
NOTE   These types of hose or hose assemblies may not necessarily be suitable for all types of petroleum based products or coal tar, or products containing coal tar.

Gummischläuche und -schlauchleitungen für Asphalt und Bitumen - Spezifikation

Diese Europäische Norm legt Anforderungen fest für zwei Typen von Schläuchen und Schlauchleitungen, unterschieden durch den maximalen Betriebsdruck und die Hauptanwendung, d. h. Typ 1 für Tankfahrzeuge auf Straßen und Schienen und Typ 2 für die Verwendung an Kaianlagen. Die Typen können weiter unterteilt werden in zwei Klassen, bezogen auf die Temperatur des zu fördernden Materials. Die Schläu-che können im Aufbau eine glatte oder rauhe Innenschicht haben.
ANMERKUNG   Diese Schlauchtypen sind nicht unbedingt einsetzbar für alle Produkte auf der Basis von Erdöl oder Kohlenteer oder für Produkte, die Kohlenteer enthalten.

Tuyaux et flexibles en caoutchouc pour asphalte et bitume - Spécification

Domaine d'application
La présente Norme européenne fixe les exigences relatives à deux types de tuyaux et flexibles identifiés par la pression maximum de service et leur usage principal. Le Type 1 est destiné aux citernes routières et ferroviaires et le Type 2 aux utilisations portuaires. Les Types peuvent être divisés en deux classes selon la température maximum du produit à acheminer. Ces tuyaux peuvent être à spirale intérieure noyée ou saillante.
NOTE   Ces types de tuyaux ne conviennent pas nécessairement à tous les produits à base de pétrole, au goudron de houille ou aux produits contenant du goudron de houille.

Gumene cevi in cevni priključki za asfalt in bitumen - Specifikacija

General Information

• Status: Withdrawn
• Publication Date: 18-Sep-2001
• Withdrawal Date: 15-Oct-2013
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-Oct-2013
• Completion Date: 16-Oct-2013
• Ref Project: SIST EN 13482:2002 - Rubber hoses and hose assemblies for asphalt and bitumen - Specification

Relations

• Replaced By: EN 13482:2013 - Rubber hoses and hose assemblies for asphalt and bitumen - Specification
• Effective Date: 23-Oct-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13482:2002
01-februar-2002
*XPHQHFHYLLQFHYQLSULNOMXþNL]DDVIDOWLQELWXPHQ6SHFLILNDFLMD
Rubber hoses and hose assemblies for asphalt and bitumen - Specification
Gummischläuche und -schlauchleitungen für Asphalt und Bitumen - Spezifikation
Tuyaux et flexibles en caoutchouc pour asphalte et bitume - Spécification
Ta slovenski standard je istoveten z: EN 13482:2001
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 13482:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13482:2002

---------------------- Page: 2 ----------------------

SIST EN 13482:2002
EUROPEAN STANDARD
EN 13482
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 23.040.70
English version
Rubber hoses and hose assemblies for asphalt and bitumen -
Specification
Tuyaux et flexibles en caoutchouc pour asphalte et bitume - Gummischläuche und -schlauchleitungen für Asphalt und
Spécification Bitumen - Spezifikation
This European Standard was approved by CEN on 20 August 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13482:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13482:2002
EN 13482:2001 (E)
Contents
page
Foreword.3
1 Scope .3
2 Normative references .3
3 Terms and definitions.4
4 Classification.4
5 Construction and materials .4
5.1 Type 1 and Type 2 hoses — rubber smooth bore (SB).4
5.2 Type 1 and Type 2 hoses — rubber rough bore (RB).4
5.3 End fittings .4
6 Dimensions and minimum bend radius.5
6.1 Internal diameters, tolerances and minimum bend radii .5
6.2 Lengths and tolerances.5
6.3 Concentricity .5
7 Physical properties of rubber compounds .5
8 Hose and hose assemblies.6
8.1 Type approval tests .6
9 Frequency of testing.
...