SIST EN 13482:2002
(Main)Rubber hoses and hose assemblies for asphalt and bitumen - Specification
Rubber hoses and hose assemblies for asphalt and bitumen - Specification
This European standard specifies requirements for two types of hose and hose assembly identified by their maximum working pressures and main use i.e. Type 1 is for road and rail tanker use and Type 2 is for dockside use. The types can be further divided into two classes related to the maximum temperature of the product to be conveyed. The hose constructions may be smooth or rough bore.
NOTE These types of hose or hose assemblies may not necessarily be suitable for all types of petroleum based products or coal tar, or products containing coal tar.
Gummischläuche und -schlauchleitungen für Asphalt und Bitumen - Spezifikation
Diese Europäische Norm legt Anforderungen fest für zwei Typen von Schläuchen und Schlauchleitungen, unterschieden durch den maximalen Betriebsdruck und die Hauptanwendung, d. h. Typ 1 für Tankfahrzeuge auf Straßen und Schienen und Typ 2 für die Verwendung an Kaianlagen. Die Typen können weiter unterteilt werden in zwei Klassen, bezogen auf die Temperatur des zu fördernden Materials. Die Schläu-che können im Aufbau eine glatte oder rauhe Innenschicht haben.
ANMERKUNG Diese Schlauchtypen sind nicht unbedingt einsetzbar für alle Produkte auf der Basis von Erdöl oder Kohlenteer oder für Produkte, die Kohlenteer enthalten.
Tuyaux et flexibles en caoutchouc pour asphalte et bitume - Spécification
Domaine d'application
La présente Norme européenne fixe les exigences relatives a deux types de tuyaux et flexibles identifiés par la pression maximum de service et leur usage principal. Le Type 1 est destiné aux citernes routieres et ferroviaires et le Type 2 aux utilisations portuaires. Les Types peuvent etre divisés en deux classes selon la température maximum du produit a acheminer. Ces tuyaux peuvent etre a spirale intérieure noyée ou saillante.
NOTE Ces types de tuyaux ne conviennent pas nécessairement a tous les produits a base de pétrole, au goudron de houille ou aux produits contenant du goudron de houille.
Gumene cevi in cevni priključki za asfalt in bitumen - Specifikacija
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13482:2002
01-februar-2002
*XPHQHFHYLLQFHYQLSULNOMXþNL]DDVIDOWLQELWXPHQ6SHFLILNDFLMD
Rubber hoses and hose assemblies for asphalt and bitumen - Specification
Gummischläuche und -schlauchleitungen für Asphalt und Bitumen - Spezifikation
Tuyaux et flexibles en caoutchouc pour asphalte et bitume - Spécification
Ta slovenski standard je istoveten z: EN 13482:2001
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 13482:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13482:2002
---------------------- Page: 2 ----------------------
SIST EN 13482:2002
EUROPEAN STANDARD
EN 13482
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 23.040.70
English version
Rubber hoses and hose assemblies for asphalt and bitumen -
Specification
Tuyaux et flexibles en caoutchouc pour asphalte et bitume - Gummischläuche und -schlauchleitungen für Asphalt und
Spécification Bitumen - Spezifikation
This European Standard was approved by CEN on 20 August 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13482:2001 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13482:2002
EN 13482:2001 (E)
Contents
page
Foreword.3
1 Scope .3
2 Normative references .3
3 Terms and definitions.4
4 Classification.4
5 Construction and materials .4
5.1 Type 1 and Type 2 hoses — rubber smooth bore (SB).4
5.2 Type 1 and Type 2 hoses — rubber rough bore (RB).4
5.3 End fittings .4
6 Dimensions and minimum bend radius.5
6.1 Internal diameters, tolerances and minimum bend radii .5
6.2 Lengths and tolerances.5
6.3 Concentricity .5
7 Physical properties of rubber compounds .5
8 Hose and hose assemblies.6
8.1 Type approval tests .6
9 Frequency of testing.7
10 Marking .7
10.1 Hoses .7
10.2 Hose assemblies.7
Annex A (normative) Test method for proof pressure .8
A.1 Test medium and temperature.8
A.2 Procedure .8
Annex B (normative) Test method for bend and burst pressure .9
Annex C (normative) Type approval and routine tests.10
Annex D (informative) Recommended test frequency for production acceptance tests.11
Bibliography .12
2
---------------------- Page: 4 ----------------------
SIST EN 13482:2002
EN 13482:2001 (E)
Foreword
This European Standard has been prepared by Technical Committee CEN /TC 218, "Rubber and plastics hoses
and hose assemblies", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2002, and conflicting national standards shall be withdrawn at the latest by
March 2002.
This standard is one in a series of specifications for hose and hose assemblies for conveying petroleum based and
associated products. It covers types of hose and hose assemblies for conveying asphalt and bitumin, which are
hazardous materials at temperatures where they can flow readily.
The annexes A, B and C are normative. Annex D is informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
1 Scope
This European standard specifies requirements for two types of hose and hose assembly identified by their
maximum working pressures and main use i.e. Type 1 is for road and rail tanker use and Type 2 is for dockside
use. The types can be further divided into two classes related to the maximum temperature of the product to be
conveyed. The hose constructions may be smooth or rough bore.
NOTE These types of hose or hose assemblies may not necessarily be suitable for all types of petroleum based products
or coal tar, or products containing coal tar.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the test and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN ISO 1746, Rubber or plastic hoses and tubing — Bending tests (ISO 1746:1998, including technical
corrigendum 1:1999)
EN ISO 4671, Rubber and plastics hoses and hose assemblies — Methods of measurements of dimensions
(ISO 4671:1999)
EN ISO 7233:1995, Rubber and plastic hoses and hose assemblies — Determination of suction resistance
(ISO 7233:1991)
EN ISO 8031, Rubber and plastic hoses and hose assemblies — Determination of electrical resistance (ISO
8031:1993)
ISO 37, Rubber vulcanised — Determination of tensile stress-strain properties
ISO 1817, Rubber, vulcanised — Determination of the effect of liquids
ISO 4649:1985, Rubber — Determination of abrasion resistance using a rotating cylindrical drum device
3
---------------------- Page: 5 ----------------------
SIST EN 13482:2002
EN 13482:2001 (E)
ISO 4661-1, Rubber, vulcanized or thermoplastic — Preparation of samples and test pieces — Part 1: Physical
tests
ISO 8330, Rubber and plastics hoses and hose assemblies — Vocabulary
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in ISO 8330 apply.
4 Classification
Hoses shall be one of the following types:
1)
Type 1 Maximum working pressure 7 bar for road and rail tanker hose and hose assemblies;
Type 2 Maximum working pressure 15 bar for dockside hose and hose assemblies.
Each type shall be available in smooth bore (SB) or rough bore (RB) construction and these additional letters shall
be part of the identification.
Each type shall be classed according to the following maximum temperature of operation:
Class A - Up to 175 °C,
Class B - Up to 200 °C.
NOTE These temperatures are the temperature of the product being conveyed inside the hose assembly.
5 Construction and materials
5.1 Type 1 and Type 2 hoses — rubber smooth bore (SB)
These hoses shall have the following construction: a synthetic rubber lining of minimum thickness of 2,0 mm
reinforcing plies of textile or steel wire, a steel wire h
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.