EN ISO 15877-1:2009/A1:2010

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010)

2009-04-02 EMA: VA information and track changed from ISO Lead to CEN Lead after ISO notification (see e-mail sent on 2009-04-01).

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 1: Allgemeines - Änderung 1 (ISO 15877-1:2009/AMD 1:2010)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1: Généralités - Amendement 1 (ISO 15877-1:2009/AMD 1:2010)

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 1. del: Splošno - Dopolnilo 1 (ISO 15877-1:2009/AMD 1:2010)

Ta del ISO 15877 določa splošne zahteve cevnih sistemov iz kloriranega polivinilklorida (PVC-C), namenjenih uporabi za napeljave z vročo in hladno vodo v stavbah za prenos pitne ali nepitne vode (domači sistemi) in za grelne sisteme pod računskimi tlaki in pri temperaturah, primernih za razred uporabe (glej preglednico 1).

General Information

• Status: Published
• Publication Date: 31-Oct-2010
• Withdrawal Date: 30-May-2011
• ICS: 23.040.01 - Pipeline components and pipelines in general
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155/WG 16 - Systems for hot and cold water applications
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Nov-2010
• Due Date: 27-Feb-2012
• Completion Date: 01-Nov-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 15877-1:2009/A1:2011 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010)

Relations

• Amends: EN ISO 15877-1:2009 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009)
• Effective Date: 11-Mar-2009

Overview

EN ISO 15877-1:2009/A1:2010 is an important amendment to the international standard governing plastics piping systems specifically designed for hot and cold water installations using chlorinated poly(vinyl chloride) (PVC-C). Developed collaboratively by CEN/TC 155 and ISO/TC 138, this amendment refines and expands the scope of PVC-C piping systems to enhance their safety and reliability in water supply and heating applications.

This standard amendment focuses on general requirements for PVC-C piping materials and systems, ensuring compatibility with various service classifications, particularly emphasizing low-temperature heating applications. EN ISO 15877-1:2009/A1:2010 provides updated conditions for material types, testing procedures, and classifications that support the global use of PVC-C in domestic and industrial plumbing systems.

Key Topics

• Material Classification: The amendment introduces two types of PVC-C materials:
  • Type I: Suitable for service classes 1, 2, and 4
  • Type II: Suitable for service classes 1, 2, 4, and 5
• Service Conditions: Newly classified conditions for service pressures and temperatures, including Class 4 for elevated pressure services typical in low-temperature heating.
• Testing Methods: Specifies rigorous testing procedures for malfunction temperature (T_mal) assessments at 95 °C and 100 °C under pressure to verify the durability and leak-tightness of solvent cemented joints.
• Compatibility Requirements: Systems using combined Type I and Type II materials are restricted to service classes 1, 2, or 4 to ensure system integrity.
• Quality Assurance: Emphasizes adherence to standardized test conditions, including continuous monitoring for leak tightness during thermal and pressure endurance tests.

Applications

EN ISO 15877-1:2009/A1:2010 is essential for manufacturers, designers, and installers involved in:

• Hot and cold water piping systems in residential, commercial, and industrial buildings.
• Low-temperature heating systems where chlorinated PVC piping offers chemical resistance and durability.
• Pressure piping systems up to 6 bar for safe fluid transport.
• Ensuring compliance in system design and material selection to meet national and international plumbing codes.

This standard facilitates the deployment of PVC-C piping in water supply and heating, enabling long-term operational safety, corrosion resistance, and ease of installation, making it a preferred choice in modern building services engineering.

Related Standards

• ISO 15877 Series: Covers various parts detailing PVC-C piping materials, dimensions, physical properties, and testing methods.
• ISO 10508: Defines classification of service conditions for plastics piping materials.
• EN Standards for Plastics Piping Systems: Related EN standards define installation practices, performance requirements, and testing of plastic piping systems.
• ISO/IEC Directives, Part 2: Governs the drafting and publication of International Standards to which this amendment conforms.

Summary

The EN ISO 15877-1:2009/A1:2010 amendment strengthens the framework for PVC-C piping systems used in hot and cold water applications. By clarifying classifications and improving testing protocols, it ensures robust performance under defined service conditions. This standard is a crucial reference for stakeholders involved in the creation, approval, and maintenance of safe, efficient, and code-compliant piping systems in the construction and plumbing industries.

Keywords: PVC-C piping systems, chlorinated polyvinyl chloride, hot and cold water installations, plastics piping standards, ISO 15877 amendment, water supply systems, low-temperature heating, piping material classification, plumbing standards, pressure testing, leak tightness standards.

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15877-1:2009/oprA1:2009
01-september-2009
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG39&&GHO6SORãQR'RSROQLOR,62
'$0
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) Part 1: General - Amendment 1 (ISO 15877-1:2009/DAM 1:2009)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 1: Allgemeines - Änderung 1 (ISO 15877-1:2009/DAM
1:2009)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1: Généralités - Amendement 1 (ISO
15877-1:2009/DAM 1:2009)
Ta slovenski standard je istoveten z: EN ISO 15877-1:2009/prA1
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15877-1:2009/oprA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN ISO 15877-1:2009/oprA1:2009

SIST EN ISO 15877-1:2009/oprA1:2009
EUROPEAN STANDARD
DRAFT
EN ISO 15877-1:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2009
ICS 23.040.20; 91.140.60
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General -
Amendment 1 (ISO 15877-1:2009/DAM 1:2009)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 1: Généralités - C) - Teil 1: Allgemeines - Änderung 1 (ISO 15877-
Amendement 1 (ISO 15877-1:2009/DAM 1:2009) 1:2009/DAM 1:2009)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 155.
This draft amendment A1, if approved, will modify the European Standard EN ISO 15877-1:2009. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-1:2009/prA1:2009: E
worldwide for CEN national Members.

SIST EN ISO 15877-1:2009/oprA1:2009
EN ISO 15877-1:2009/prA1:2009 (E)
Contents Page
Foreword .3

SIST EN ISO 15877-1:2009/oprA1:2009
EN ISO 15877-1:2009/prA1:2009 (E)
Foreword
This document (EN ISO 15877-1:2009/prA1:2009) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems", the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 "Plastics pipes, fittings and valves for the transport of fluids".
This document is currently submitted to the parallel Enquiry.

SIST EN ISO 15877-1:2009/oprA1:2009

SIST EN ISO 15877-1:2009/oprA1:2009
DRAFT AMENDMENT ISO 15877-1:2009/DAmd 1
ISO/TC 138/SC 2 Secretariat: SNV
Voting begins on: Voting terminates on:
2009-06-11 2009-11-11
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Plastics piping systems for hot and cold water installations —
Chlorinated poly(vinyl chloride) (PVC-C) —
Part 1:
General
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle)
chloré (PVC-C) —
Partie 1: Généralités
AMENDEMENT 1
ICS 23.040.20; 91.140.60
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization (CEN), and processed
under the CEN-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SU
...

SLOVENSKI STANDARD
01-marec-2011
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG39&&GHO6SORãQR'RSROQLOR,62
$0'
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 1: Allgemeines - Änderung 1 (ISO 15877-1:2009/AMD
1:2010)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1: Généralités - Amendement 1 (ISO
15877-1:2009/AMD 1:2010)
Ta slovenski standard je istoveten z: EN ISO 15877-1:2009/A1:2010
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15877-1:2009/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 23.040.20; 91.140.60
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General -
Amendment 1 (ISO 15877-1:2009/AMD 1:2010)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 1: Généralités - C) - Teil 1: Allgemeines - Änderung 1 (ISO 15877-
Amendement 1 (ISO 15877-1:2009/AMD 1:2010) 1:2009/AMD 1:2010)
This amendment A1 modifies the European Standard EN ISO 15877-1:2009; it was approved by CEN on 31 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-1:2009/A1:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 15877-1:2009/A1:2010) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems” the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”.
This Amendment to the European Standard EN ISO 15877-1:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and
conflicting national standards shall be withdrawn at the latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

INTERNATIONAL ISO
STANDARD 15877-1
Second edition
2009-03-15
AMENDMENT 1
2010-11-01
Plastics piping systems for hot and cold
water installations — Chlorinated
poly(vinyl chloride) (PVC-C) —
Part 1:
General
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) —
Partie 1: Généralités
AMENDEMENT 1
Reference number
ISO 15877-1:2009/Amd.1:2010(E)
©
ISO 2010
ISO 15877-1:2009/Amd.1:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer pe
...