Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)

ISO 15876-1:2017 specifies the general aspects of polybutene-1 (PB-1) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see Table 1).
The designation polybutene is used together with the abbreviation PB throughout this document.
ISO 15876-1:2017 covers a range of service conditions (application classes) and design pressure and pipe dimension classes. Values of TD, Tmax and Tmal in excess of those in Table 1 do not apply.
NOTE          It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with the other parts of ISO 15876, this document is applicable to PB pipes, fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polybuten (PB) - Teil 1: Allgemeines (ISO 15876-1:2017)

Dieses Dokument legt allgemeine Anforderungen an Rohrleitungssysteme aus Polybuten-1 (PB-1) fest, die für die Verwendung in der Warm- und Kaltwasserinstallation innerhalb von Gebäuden für den Transport von Trink- oder Brauchwasser (Hausinstallation) sowie für Heizungsanlagen bei den zulässigen Betriebsdrücken und Temperaturen entsprechend der Anwendungsklasse (siehe Tabelle 1) vorgesehen sind.
In diesem Dokument wird durchgehend die Bezeichnung Polybuten zusammen mit der Abkürzung PB verwendet.
Dieses Dokument deckt einen Bereich von Betriebsbedingungen (Anwendungsklassen) sowie zulässige Betriebsdrücke und Abmessungsklassen für Rohre ab. Werte für TD, Tmax und Tmal oberhalb der in Tabelle 1 angegebenen Werte sind nicht eingeschlossen.
ANMERKUNG   Der Anwender oder Auftraggeber ist unter Berücksichtigung der eigenen besonderen Anforderungen sowie der geltenden nationalen Festlegungen und Verlegepraktiken für die entsprechende Auswahl anhand dieser Kriterien verantwortlich.
Es legt auch die Prüfparameter für die Prüfverfahren fest, auf die in diesem Dokument verwiesen wird.
Zusammen mit den übrigen Teilen von ISO 15876 gilt dieses Dokument für Rohre und Formstücke aus PB, deren Verbindungen untereinander sowie mit Rohrleitungsteilen aus anderen Kunststoffen oder aus Nichtkunststoffen (Metall), die für die Warm- und Kaltwasserinstallation vorgesehen sind.

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 1: Généralités (ISO 15876-1:2017)

ISO 15876-1:2017 spécifie les aspects généraux des systèmes de canalisations en polybutène-1 (PB-1), conçus pour être utilisés dans des installations d'eau chaude et froide à l'intérieur des bâtiments, pour le transport de l'eau destinée ou non à la consommation humaine (systèmes domestiques), et dans des installations de chauffage, à des pressions et des températures de service correspondant à leur classe d'application (voir le Tableau 1).
La désignation polybutène est utilisée conjointement avec l'abréviation PB dans l'ensemble du présent document.
ISO 15876-1:2017 couvre une gamme de conditions de service (classes d'application) et de classes de pressions de service et de dimensions des tubes. Les valeurs TD, Tmax et Tmal dépassant celles du Tableau 1 ne s'appliquent pas.
NOTE          Il est de la responsabilité de l'acheteur ou du prescripteur de sélectionner convenablement ces aspects, en tenant compte des exigences particulières et des éventuelles règles nationales et pratiques ou codes de pose appropriés.
Il spécifie également les paramètres d'essai pour les méthodes d'essai auxquelles il est fait référence dans le présent document.
Avec les autres parties de l'ISO 15876, le présent document s'applique aux tubes et aux raccords en PB, à leurs assemblages et aux assemblages avec des composants fabriqués à partir d'autres matériaux, plastiques ou non plastiques, destinés à des installations d'eau chaude et froide.

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polibuten (PB) - 1. del: Splošno (ISO 15876-1:2017)

Ta del standarda EN ISO 15876 določa splošne vidike cevnih sistemov iz polibutena-1 (PB-1), ki se uporabljajo za napeljave z vročo in hladno vodo za prenos pitne in nepitne vode v stavbah (gospodinjski sistemi), ter za sisteme ogrevanja glede na predvidene tlake in temperature v skladu z razredom uporabe (glej preglednico 1).
Zaradi poenostavitve se poimenovanje polibuten v tem dokumentu uporablja skupaj s kratico PB.
Ta standard zajema različne pogoje uporabe (razrede uporabe) ter razrede predvidenih tlakov in dimenzij cevi. Ta standard se ne uporablja za vrednosti TD, Tmaks in Tmal, ki presegajo vrednosti iz preglednice 1.
OPOMBA: Za ustrezno izbiro teh vidikov je odgovoren kupec ali projektant, pri čemer mora upoštevati posebne zahteve ter vse pomembne nacionalne predpise in prakse ali kodekse vgradnje.
Določa tudi preskusne parametre za preskusne metode iz tega standarda. ISO 15876 je referenčni standard za izdelke. Uporablja se za cevi, fitinge, njihove spoje ter tudi za spoje s sestavnimi deli iz drugih polimernih in nepolimernih materialov, namenjene uporabi v napeljavah z vročo in hladno vodo. Ta del standarda ISO 15876 je namenjen uporabi skupaj z vsemi ostalimi deli standarda ISO 15876.

General Information

Status
Published
Publication Date
07-Feb-2017
Withdrawal Date
30-Aug-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Feb-2017
Due Date
14-Feb-2017
Completion Date
08-Feb-2017

Relations

Buy Standard

Standard
EN ISO 15876-1:2017
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15876-1:2017
01-april-2017
1DGRPHãþD
SIST EN ISO 15876-1:2004
SIST EN ISO 15876-1:2004/A1:2007
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLEXWHQ 3% GHO6SORãQR ,62
Plastics pipings systems for hot and cold water installations - Polybutene (PB) - Part 1:
General (ISO 15876-1:2017)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polybuten
(PB) - Teil 1: Allgemeines (ISO 15876-1:2017)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polybutène (PB) - Partie 1 : Généralités (ISO 15876-1:2017)
Ta slovenski standard je istoveten z: EN ISO 15876-1:2017
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15876-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15876-1:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 15876-1:2017


EN ISO 15876-1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2017
EUROPÄISCHE NORM
ICS 23.040.01; 91.140.60 Supersedes EN ISO 15876-1:2003
English Version

Plastics piping systems for hot and cold water installations
- Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polybutène (PB) - Kaltwasserinstallation - Polybuten (PB) - Teil 1:
Partie 1: Généralités (ISO 15876-1:2017) Allgemeines (ISO 15876-1:2017)
This European Standard was approved by CEN on 24 December 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15876-1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15876-1:2017
EN ISO 15876-1:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 15876-1:2017
EN ISO 15876-1:2017 (E)
European foreword
This document (EN ISO 15876-1:2017) has been prepared by Technical Committee
CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN, in
collaboration with Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport
of fluids”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall
be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 15876-1:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.