EN ISO 6401:2008

Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)

ISO 6401:2008 specifies a method for the determination of vinyl chloride monomer in homopolymer and copolymer resins of vinyl chloride and compounded materials. The method is based on sample dissolution and headspace gas chromatography. Concentrations of vinyl chloride in the range 0,1 mg/kg to 3,0 mg/kg can be determined.
A "dry method", suitable for PVC resins but not compounded materials, is widely used within the industry for in-house determinations. A separate International Standard based on this methodology is under development.

Kunststoffe - Polyvinylchlorid - Bestimmung des Restgehaltes an Vinylchlorid-Monomer - Gaschromatographisches Verfahren (ISO 6401:2008)

Die vorliegende Internationale Norm legt ein Verfahren zur Bestimmung des Vinylchlorid-Monomers in Vinylchlorid-Homopolymeren und  Copolymeren sowie Compound-Materialien fest. Das Verfahren beruht auf dem Lösen der Probe und anschließender Headspace-Gaschromatographie. Dabei können Vinylchlorid-Konzentrationen im Bereich von 0,1 mg/kg bis 3,0 mg/kg bestimmt werden.
Ein für PVC-Harze jedoch nicht für Compound-Materialien geeignetes „Trockenverfahren“ findet in der Industrie für betriebsinterne Bestimmungen häufig Anwendung. Eine getrennte Internationale Norm zu dieser Verfahrensweise wird derzeit erarbeitet.

Plastiques - Poly(chlorure de vinyle) - Détermination du chlorure de vinyle monomère résiduel - Méthode par chromatographie en phase gazeuse (ISO 6401:2008)

L'ISO 6401:2008 spécifie une méthode de détermination de la teneur en chlorure de vinyle monomère dans les résines d'homopolymères et de copolymères de chlorure de vinyle et matériaux composés. Cette méthode repose sur la dissolution de l'échantillon et sur la chromatographie en phase gazeuse à «espace de tête». La concentration en chlorure de vinyle peut être déterminée entre 0,1 mg/kg et 3,0 mg/kg.
Pour les déterminations en interne, le secteur de l'industrie a pour habitude d'utiliser une «méthode sèche», adaptée aux résines PVC mais pas aux matériaux composés. Une autre Norme internationale s'appuyant sur cette méthodologie est en cours d'élaboration.

Polimerni materiali - Homopolimeri in kopolimeri vinilklorida - Določevanje preostanka vinilklorida - Plinska kromatografija (ISO 6401:2008)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2008
• Withdrawal Date: 20-Dec-2022
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Dec-2022
• Ref Project: SIST EN ISO 6401:2009 - Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)

Relations

• Replaces: EN ISO 6401:2004 - Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method (ISO 6401:1985)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 6401:2022 - Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer using gas-chromatographic method (ISO 6401:2022)
• Effective Date: 20-Oct-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6401:2009
01-januar-2009
1DGRPHãþD
SIST EN ISO 6401:2005
3ROLPHUQLPDWHULDOL+RPRSROLPHULLQNRSROLPHULYLQLONORULGD'RORþHYDQMH
SUHRVWDQNDYLQLONORULGD3OLQVNDNURPDWRJUDILMD,62
Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-
chromatographic method (ISO 6401:2008)
Kunststoffe - Polyvinylchlorid - Bestimmung des Restgehaltes an Vinylchlorid-Monomer -
Gaschromatographisches Verfahren (ISO 6401:2008)
Plastiques - Poly(chlorure de vinyle) - Détermination du chlorure de vinyle monomere
résiduel - Méthode par chromatographie en phase gazeuse (ISO 6401:2008)
Ta slovenski standard je istoveten z: EN ISO 6401:2008
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 6401:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6401:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 6401:2009
EUROPEAN STANDARD
EN ISO 6401
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 83.080.20 Supersedes EN ISO 6401:2004
English Version
Plastics - Poly(vinyl chloride) - Determination of residual vinyl
chloride monomer - Gas-chromatographic method (ISO
6401:2008)
Plastiques - Poly(chlorure de vinyle) - Détermination du Kunststoffe - Polyvinylchlorid - Bestimmung des
chlorure de vinyle monomère résiduel - Méthode par Restgehaltes an Vinylchlorid-Monomer -
chromatographie en phase gazeuse (ISO 6401:2008) Gaschromatographisches Verfahren (ISO 6401:2008)
This European Standard was approved by CEN on 16 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6401:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6401:2009
EN ISO 6401:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6401:2009
EN ISO 6401:2008 (E)
Foreword
This document (EN ISO 6401:2008) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at
the latest by March 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6401:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 6401:2008 has been approved by CEN as a EN ISO 6401:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 6401:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 6401:2009
INTERNATIONAL ISO
STANDARD 6401
Second edition
2008-09-01
Plastics — Poly(vinyl chloride) —
Determination of residual vinyl chloride
monomer — Ga
...