EN ISO 11127-2:1997
(Main)Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993)
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993)
The procedure includes weighing out a test portion of approximately 300 g of the sample, placing the test portion in the top sieve of a set of test sieves (including all the sieves listed against the grade under test in the appropriate part of ISO 11126) with the largest-aperture sieve on the top and progress to the smallest aperture at the bottom with a pan, to catch any abrasive that falls through the finest sieve, sieving in a sieve machine, weighing the abrasive retained on each sieve and transferred on to a balance pan. Annex A gives information on the international standards series for non-metallic blast-cleaning abrasives ISO 11126 and ISO 11127.
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für nichtmetallische Strahlmittel - Teil 2: Bestimmung der Korngrößenverteilungen (ISO 11127-2:1993)
Dieser Teil von ISO 11127 legt ein Verfahren zur Bestimmung der Korngrössen- verteilung von nichtmetallischen Strahlmitteln durch Siebung fest.
Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 2: Analyse granulométrique (ISO 11127-2:1993)
La présente norme est l'une des parties de l'ISO 11127, qui traite de l'échantillonnage et des essais des abrasifs non métalliques destinés à la préparation par projection. Les types d'abrasifs non métalliques et les prescriptions relatives à chacun figurent dans les différentes parties de l'ISO 11126. Les séries des normes ISO 11126 et ISO 11127 constituent une série cohérente de normes internationales sur les abrasifs non métalliques destinés à la préparation par projection. Des informations sur toutes les parties des deux séries sont données dans l'annexe A. La présente partie de l'ISO 11127 prescrit une méthode d'analyse granulométrique par tamisage des abrasifs non métalliques destinés à la préparation par projection.
Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za nekovinske granulate za peskanje - 2. del: Ugotavljanje porazdelitve velikosti delcev (ISO 11127-2:1993)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11127-2:1997
01-december-1997
Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov -
Preskusne metode za nekovinske granulate za peskanje - 2. del: Ugotavljanje
porazdelitve velikosti delcev (ISO 11127-2:1993)
Preparation of steel substrates before application of paints and related products - Test
methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size
distribution (ISO 11127-2:1993)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für nichtmetallische Strahlmittel - Teil 2: Bestimmung der
Korngrößenverteilungen (ISO 11127-2:1993)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d'essai pour abrasifs non métalliques destinés a la préparation par
projection - Partie 2: Analyse granulométrique (ISO 11127-2:1993)
Ta slovenski standard je istoveten z: EN ISO 11127-2:1997
ICS:
25.220.10 Priprava površine Surface preparation
SIST EN ISO 11127-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11127-2:1997
---------------------- Page: 2 ----------------------
SIST EN ISO 11127-2:1997
---------------------- Page: 3 ----------------------
SIST EN ISO 11127-2:1997
---------------------- Page: 4 ----------------------
SIST EN ISO 11127-2:1997
---------------------- Page: 5 ----------------------
SIST EN ISO 11127-2:1997
---------------------- Page: 6 ----------------------
SIST EN ISO 11127-2:1997
INTERNATIONAL ISO
STANDARD 11127-2
First edition
1993-12-15
Preparation of steel Substrates before
application of paints and related
- Test methods for non-metallic
products
blast-cleaning abrasives -
Part 2:
Determination of particle size distribution
Preparation des subjectiles d’acier avant application de peintures et de
produits assimik - Methodes d’essai pour abrasifs non mktalliques
destin& ä Ia preparation par projection -
Partie 2: Analyse granulometrique
Reference number
ISO 11127-2:1993(E)
---------------------- Page: 7 ----------------------
SIST EN ISO 11127-2:1997
ISO 11127=2:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizstions, governmental
and non-governmental, in liaison with ISO, also take part in the work. YSO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft international Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
international Standard ISO 11127-2 was prepared by Technical Committee
ISOnC 35, Paints and varnishes, Subcommittee SC 12, Preparation of
steel Substrates before application of paints and related products.
ISO 11127 consists of the following Parts, under the general title Prep-
aration 0% steel Substrates before application of paints and related
products - Test methods for non-metallic blast-cleaning abrasives:
- Part 1: Sampling
- Part 2: Determination of particle size distribution
- Part 3: Determination of apparent density
- Part 4: Assessment sf hardness by a glass slide test
- Part 5: Determination o f moisture
- Part 6: Determination of vvater-soluble contaminants by conductivity
measurement
- Part 7: Determination of vva ter-soluble chlorides
- Part 8: Determination o f abrasive mechanical properties
0 ISO 1993
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland
---------------------- Page: 8 ----------------------
SIST EN ISO 11127-2:1997
0 ISO
ISO 1112702:1993(E)
At the time 0% publication of this part 0% ISO 1% 127, part 8 was in course
of preparation.
Annex A of this part of ISO 11127 is for information only.
---------------------- Page: 9 ----------------------
SIST EN ISO 11127-2:1997
This page intentionally left blank
---------------------- Page: 10 ----------------------
SIST EN ISO 11127-2:1997
INTERNATIONAL STANDARD 0 ISO
ISO 11127-2:1993(E)
Preparation of steel Substrates before application of
paints and related products
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.