EN ISO 8676:2011

Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)

ISO 8676:2011 specifies the characteristics of hexagon head screws with metric fine pitch thread with nominal thread diameters, d, from 8 mm to 64 mm, of product grade A for nominal thread diameters, d, from 8 mm to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is the shorter, and of product grade B for nominal thread diameters, d, over 24 mm or nominal lengths, l, over 10d or 150 mm, whichever is the shorter.

Sechskantschrauben mit Gewinde bis Kopf und metrischem Feingewinde - Produktklassen A und B (ISO 8676:2011)

Diese Internationale Norm legt Eigenschaften für Sechskantschrauben mit Gewinde bis Kopf, mit metrischem Feingewinde und Gewindenenndurchmessern d von 8 mm bis 64 mm, mit der Produktklasse A für Gewindenenndurchmesser d von 8 mm bis 24 mm und Nennlängen l 10 d oder 150 mm, wobei der kleinere Zahlenwert gilt und mit der Produktklasse B für Gewindenenndurchmesser d über 24 mm oder Nennlängen l 10 d oder 150 mm, wobei der kleinere Zahlenwert gilt, fest.
Falls in besonderen Fällen andere Festlegungen als die in dieser Norm aufgeführten benötigt werden, können diese den entsprechenden ISO Normen entnommen werden, z. B. ISO 724, ISO 888, ISO 898 1, ISO 965 1, ISO 3506 1, ISO 4753 und ISO 4759 1.
Schrauben mit Gewinde bis Kopf mit Regelgewinde nach ISO 4017 sollten bevorzugt werden.

Vis à tête hexagonale à filetage métrique à pas fin entièrement filetées - Grades A et B (ISO 8676:2011)

L'ISO 8676:2011 spécifie les caractéristiques des vis à tête hexagonale à filetage métrique à pas fin entièrement filetées, de diamètre nominal de filetage, d, de 8 mm à 64 mm, de grade A pour les diamètres d de 8 mm à 24 mm et les longueurs nominales, l, inférieures ou égales à 10d ou à 150 mm, la plus petite des deux valeurs étant retenue, et de grade B pour les diamètres d supérieurs à 24 mm ou les longueurs nominales, l, supérieures à 10d ou à 150 mm, la plus petite des deux valeurs étant retenue.

Vijaki s šestrobo glavo z navojem do glave in metrskim drobnim navojem - Razreda izdelave A in B (ISO 8676:2011)

ISO 8676:2010 določa značilnosti vijakov s šestrobo glavo z navojem do glave in metrskim drobnim navojem z nominalnimi premeri navoja, d, od 8 mm do 64 mm razreda izdelave A za nominalne premere navoja, d, od 8 mm do 24 mm in nominalnimi dolžinami, l, do vključno 10 d ali 150 mm, kar je krajše, in razreda izdelave B za nominalne premere navoja, d, nad 24 mm ali nominalnih dolžin, l, nad 10 d ali 150 mm, kar je krajše.

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2011
• Withdrawal Date: 19-Jul-2022
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Jul-2022
• Ref Project: SIST EN ISO 8676:2012 - Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)

Relations

• Replaces: EN ISO 8676:2000 - Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999)
• Effective Date: 09-Apr-2011
• Replaced By: EN ISO 8676:2022 - Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B (ISO 8676:2022)
• Effective Date: 27-Jul-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8676:2012
01-januar-2012
1DGRPHãþD
SIST EN ISO 8676:2002
Vijaki s šestrobo glavo z navojem do glave in metrskim drobnim navojem -
Razreda izdelave A in B (ISO 8676:2011)
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO
8676:2011)
Sechskantschrauben mit Gewinde bis Kopf und metrischen Feingewinde -
Produktklassen A und B (ISO 8676:2011)
Vis à tête hexagonale à filetage métrique à pas fin entièrement filetées - Grades A et B
(ISO 8676:2011)
Ta slovenski standard je istoveten z: EN ISO 8676:2011
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 8676:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8676:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 8676:2012


EUROPEAN STANDARD
EN ISO 8676

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 21.060.10 Supersedes EN ISO 8676:2000
English Version
Hexagon head screws with metric fine pitch thread - Product
grades A and B (ISO 8676:2011)
Vis à tête hexagonale à filetage métrique à pas fin Sechskantschrauben mit Gewinde bis Kopf und metrischen
entièrement filetées - Grades A et B (ISO 8676:2011) Feingewinde - Produktklassen A und B (ISO 8676:2011)
This European Standard was approved by CEN on 31 January 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8676:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8676:2012
EN ISO 8676:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8676:2012
EN ISO 8676:2011 (E)
Foreword
This document (EN ISO 8676:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8676:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8676:2011 has been approved by CEN as a EN ISO 8676:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 8676:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 8676:2012

INTERNATIONAL ISO
STANDARD 8676
Third edition
2011-04-01

Hexagon head screws with metric fine
pitch thread — Product grades A and B
Vis à tête hexagonale à filetage métrique à pas fin entièrement
filetées — Grades A et B





Reference number
...