EN ISO 10673:2009

Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009)

ISO 10673:2009 specifies the characteristics of plain steel washers, small, normal and large series, of product grade A for metric screw and washer assemblies in accordance with ISO 10644.

Flache Scheiben für Kombi-Schrauben - Kleine, normale und große Reihe - Produktklasse A (ISO 10673:2009)

Diese Internationale Norm legt die Eigenschaften von flachen Scheiben aus Stahl der kleinen, normalen und
großen Reihe in Produktklasse A für metrische Kombi-Schrauben nach ISO 10644 fest.
ANMERKUNG 1 Das Produkt kann unter den in Abschnitt 5 definierten Bedingungen hergestellt werden.
ANMERKUNG 2 Die Herstellung von Kombi-Schrauben berücksichtigt Werkstoff und die Produktionsverfahren von
Schraubenrohling und flacher Scheibe sowie die Montageprozess der einzelnen Bauteile, um die technischen Lieferbedingungen
erfüllen zu können.

Rondelles plates pour vis à rondelle plate incorporée - Séries étroite, normale et large - Grade A (ISO 10673:2009)

L'ISO 10673:2009 spécifie les caractéristiques des rondelles plates en acier, des séries étroite, normale et large, de grade A, pour les vis à filetage métrique avec rondelle incorporée conformes à l'ISO 10644.

Okrogle ravne podložke za vijake z ujeto podložko - Majhne, normalne in velike vrste - Razred izdelave A (ISO 10673:2009)

Ta evropski standard določa značilnosti majhnih, normalnih in velikih vrst jeklenih okroglih ravnih podložk za vijake z ujeto podložko z razredom izdelave A in razredoma trdote 200 HV in 300 HV v skladu s standardom ISO 10644.

General Information

• Status: Published
• Publication Date: 30-Jun-2009
• Withdrawal Date: 30-Jan-2010
• ICS: 21.060.30 - Washers, locking elements
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jul-2009
• Due Date: 25-Oct-2009
• Completion Date: 01-Jul-2009
• Ref Project: SIST EN ISO 10673:2012 - Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009)

Relations

• Replaces: EN ISO 10673:1998 - Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:1998)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10673:2012
01-marec-2012
1DGRPHãþD
SIST EN ISO 10673:2001
Okrogle ravne podložke za vijake z ujeto podložko - Majhne, normalne in velike
vrste - Razred izdelave A (ISO 10673:2009)
Plain washers for screw and washer assemblies - Small, normal and large series -
Product grade A (ISO 10673:2009)
Flache Scheiben für Kombi-Schrauben - Kleine, normale und große Reihe -
Produktklasse A (ISO 10673:2009)
Rondelles plates pour vis à rondelle plate incorporée - Séries étroite, normale et large -
Grade A (ISO 10673:2009)
Ta slovenski standard je istoveten z: EN ISO 10673:2009
ICS:
21.060.30 Podložke, varovalni elementi Washers, locking elements
SIST EN ISO 10673:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10673:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 10673:2012
EUROPEAN STANDARD
EN ISO 10673
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 21.060.30 Supersedes EN ISO 10673:1998
English Version
Plain washers for screw and washer assemblies - Small, normal
and large series - Product grade A (ISO 10673:2009)
Rondelles plates pour vis à rondelle plate incorporée - Flache Scheiben für Kombi-Schrauben - Kleine, normale
Séries étroite, normale et large - Grade A (ISO und große Reihe - Produktklasse A (ISO 10673:2009)
10673:2009)
This European Standard was approved by CEN on 20 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10673:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10673:2012
EN ISO 10673:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10673:2012
EN ISO 10673:2009 (E)
Foreword
This document (EN ISO 10673:2009) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10673:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10673:2009 has been approved by CEN as a EN ISO 10673:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10673:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 10673:2012

INTERNATIONAL ISO
STANDARD 10673
Second edition
2009-07-01


Plain washers for screw and washer
assemblies — Small, normal and large
series — Product grade A
Rondelles plates pour vis à rondelle plate incorporée — Séries étroite,
normale et large — Grade A




Reference number
ISO 10673:20
...