CEN ISO/TS 17423:2014

Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014)

ISO/TS 17423:2014 specifies communication service parameters presented by ITS-S station (ITS_S) application processes to the ITS-S management in support of automatic selection of ITS-S communication profiles in an ITS station unit (ITS-SU) and related related procedures for the static and dynamic ITS-S communication profile selection processes at a high functional level, and provides an illustration of objectives used to estimate an optimum ITS-S communication profile.

Intelligente Transportsysteme - Kooperative Systeme - ITS Anwendungsanforderungen und Grundsätze zur Auswahl von Kommunikationsprofilen (ISO/TS 17423:2014)

Systèmes intelligents de transport - Systèmes coopératifs - Exigences d'application d'ITS pour sélection d'interfaces de communication (ISO/TS 17423:2014)

Inteligentni transportni sistemi - Kooperativni sistemi - Zahteve in cilji ITS za izbor komunikacijskih profilov (ISO/TS 17423:2014)

CEN ISO/TS 17423 določa parametre komunikacijske storitve, ki jih aplikacijski postopki postaje ITS (ITS-S) predstavljajo upravljanju ITS-S v podporo samodejni izbiri komunikacijskih profilov ITS-S na enoti postaje ITS (ITS-SU), – določa povezane postopke za statične in dinamične postopke izbire komunikacijskih profilov ITS-S, – zagotavlja pregled ciljev, uporabljenih za predvidevanje optimalnega komunikacijskega profila ITS-S.

General Information

• Status: Withdrawn
• Publication Date: 15-Apr-2014
• Withdrawal Date: 05-Jun-2018
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 16 - Co-operative systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Jun-2018
• Directive: 2010/40/EU - Directive 2010/40/EU of the European Parliament and of the Council of 7 July 2010 on the framework for the deployment of Intelligent Transport Systems in the field of road transport and for interfaces with other modes of transport Text with EEA relevance
• Mandate: M/453 - Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of information and communication technologies to support the interoperability of co-operative for intelligent transport in the european community
• Ref Project: SIST-TS CEN ISO/TS 17423:2014 - Intelligent transport systems - Co-operative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014)

Relations

• Replaced By: EN ISO 17423:2018 - Intelligent transport systems - Cooperative systems - Application requirements and objectives (ISO 17423:2018)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2014
Inteligentni transportni sistemi - Kooperativni sistemi - Zahteve in cilji ITS za izbor
komunikacijskih profilov (ISO/TS 17423:2014)
Intelligent transport systems - Co-operative systems - ITS application requirements and
objectives for selection of communication profiles (ISO/TS 17423:2014)
Intelligente Transportsysteme - Kooperative Systeme - ITS Anwendungsanforderungen
zur automatischen Auswahl von Kommunikationsschnittstellen (ISO/TS 17423:2014)
Systèmes intelligents de transport - Systèmes coopératifs - Exigences d'application d'ITS
pour sélection d'interfaces de communication (ISO/TS 17423:2014)
Ta slovenski standard je istoveten z: CEN ISO/TS 17423:2014
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CEN ISO/TS 17423
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2014
ICS 35.240.60; 03.220.20
English Version
Intelligent transport systems - Cooperative systems - ITS
application requirements and objectives for selection of
communication profiles (ISO/TS 17423:2014)
Systèmes intelligents de transport - Systèmes coopératifs - Intelligente Transportsysteme - Kooperative Systeme - ITS
Exigences d'application d'ITS pour sélection d'interfaces de Anwendungsanforderungen zur automatischen Auswahl
communication (ISO/TS 17423:2014) von Kommunikationsschnittstellen (ISO/TS 17423:2014)
This Technical Specification (CEN/TS) was approved by CEN on 8 March 2014 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 17423:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (CEN ISO/TS 17423:2014) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent transport
systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 17423:2014 has been approved by CEN as CEN ISO/TS 17423:2014 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 17423
First edition
2014-04-15
Intelligent transport systems —
Cooperative systems — ITS application
requirements and objectives for
selection of communication profiles
Systèmes intelligents de transport — Systèmes coopératifs —
Exigences d’application d’ITS pour sélection d’interfaces de
communication
Reference number
ISO/TS 17423:2014(E)
©
ISO 2014
ISO/TS 17423:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO/TS 17423:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Communication service parameters . 4
5.1 Abstraction of application processes from communications . . 4
5.2 Communication service parameter classes . 7
5.3 Operational communication service parameters . 8
5.4 Destination communication service parameters . 9
5.5 Performance communication service parameters .10
5.6 Security communication service parameters .12
5.7 Protocol communication service parameter .12
5.8 Communication service parameters overview .13
6 Policies and regulations .14
6.1 Cost policy .14
6.2 Need for station anonymity .16
6.3 Need for station location privacy .16
6.4 Support of station authentication.16
7 ITS-S procedures for ITS-S communication profile selection .16
7.1 Overview .16
7.2 Presentation of communication service parameters .16
7.3 Monitoring of capabilities of communications .17
7.4 Monitoring of regulations and policies .18
7.5 Selection of ITS-S communication profiles .18
7.6 Interaction with user of ITS-SU .18
7.7 Support of other application processes .18
Annex A (normative) ASN.1 modules .20
Annex B (informative) Example of presentation of communication service parameters .26
Annex C (informative) On communication requirements and objectives .29
Bibliography .32
ISO/TS 17423:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
ISO/TS 17423 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 278, Intelligent transport systems, in collaboration with ISO Technical Committee ISO/TC 204,
Intelligent transport systems, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
iv © ISO 2014 – All rights reserved

ISO/TS 17423:2014(E)
Introduction
Abstracting applications from communications is a useful basic architectural principle of Intelligent
1)
Transport Systems (ITS) embodied in the ITS station and communication architecture presented in
ISO 21217.
Applications and communications are linked together using the concepts of flows an
...