EN 1458-2:2011
(Main)Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy
Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy
This European Standard specifies the requirements and test methods for rational use of energy, including measurement of both gas and electrical energy consumption, of domestic direct gas-fired tumble dryers, of types B22D and B23D, of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances".
This European Standard does not apply to:
a) catalytic combustion appliances;
b) appliances designed exclusively for industrial purposes;
c) appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere;
d) appliances of the condensing type wherein the heated air and products of combustion used for the drying process are dehumidified by cooling with water or air;
e) appliances intended to be used in vehicles or on board ships or aircraft.
This European Standard covers type testing only.
Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 2: Rationelle Energieverwendung
Diese Europäische Norm legt die Anforderungen an und Prüfverfahren für die rationelle Energieverwendung von direkt gasbeheizten Haushalts Trommeltrocknern der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW, im folgenden „Geräte“ genannt, fest, was auch die Messung des Verbrauchs an sowohl Gasenergie als auch elektrischer Energie umfasst.
Diese Europäische Norm gilt nicht für:
a) Geräte mit katalytischer Verbrennung;
b) Geräte, die ausschließlich für industrielle Zwecke ausgelegt sind;
c) Geräte, die dazu bestimmt sind, an Standorten eingesetzt zu werden, an denen besondere Bedingungen vorherrschen, wie z. B. das Vorhandensein einer korrodierenden oder explosionsfähigen Atmosphäre;
d) Geräte vom kondensierenden Typ, in denen die erwärmte Luft und die Verbrennungsprodukte (Abgase), die für den Trockenprozess genutzt werden, durch Kühlung mit Wasser oder Luft entfeuchtet werden;
e) Geräte, die dazu bestimmt sind, in Fahrzeugen oder an Bord von Schiffen oder Flugzeugen verwendet zu werden.
Diese Europäische Norm behandelt nur die Typprüfung.
Sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 2: Utilisation rationnelle de l'énergie
Cette Norme européenne définit les exigences et les méthodes d'essais pour l'utilisation rationnelle
de l'énergie des sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les
combustibles gazeux, de types B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW,
désignés, ci-après, sous le terme "appareils".
Cette Norme européenne ne s'applique pas :
a) aux appareils à combustion catalytique ;
b) aux appareils conçus exclusivement à des fins industrielles ;
c) aux appareils destinés à être utilisés dans des locaux où règnent certaines conditions
spécifiques, telles que la présence d'atmosphère corrosive ou explosive ;
d) aux appareils du type à condensation à l'intérieur desquels l'air chauffé et les produits de
combustion utilisés pour le séchage sont déshumidifiés par refroidissement à l'eau ou à l'air ;
e) aux appareils destinés à être utilisés dans les véhicules ou à bord des bateaux ou des avions.
Cette Norme européenne couvre uniquement les essais de type.
Gospodinjski bobnasti sušilniki s plinskim ogrevanjem tipov B22D in B23D z imensko močjo do vključno 6 kW - 2. del: Smotrna raba energije
Ta evropski standard določa zahteve in preskusne metode za smotrno rabo energijo, vključno z merjenjem porabe plinske in električne energije gospodinjskih bobnastih sušilnikov s plinskim ogrevanjem tipov B22D in B23D z imensko močjo do vključno 6 kW, v nadaljevanju »aparatov«.
Ta evropski standard ne velja za:
a) aparate s katalitičnim izgorevanjem;
b) aparate, narejene izključno za industrijske namene;
c) aparate za uporabo na mestih, kjer prevladujejo posebne okoliščine, kot je prisotnost korozivne ali eksplozivne atmosfere;
d) aparate kondenzacijskega tipa, pri katerih se segreti zrak in proizvodi izgorevanja, ki se uporabljajo za postopek sušenja, razvlažijo s hlajenjem z vodo ali zrakom;
e) aparate za uporabo v vozilih ali na krovih ladij ali zračnih plovil.
Ta evropski standard zajema samo tipsko preskušanje.
General Information
- Status
- Published
- Publication Date
- 08-Nov-2011
- Withdrawal Date
- 30-May-2012
- Technical Committee
- CEN/TC 299 - Gas-fired sorption appliances and domestic gas-fired washing and drying appliances
- Drafting Committee
- CEN/TC 299/WG 1 - Gas-fired washing and drying appliances
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 19-Apr-2023
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 12-Nov-2011
Overview
EN 1458-2:2011 is a European Standard developed by CEN that focuses on the rational use of energy in domestic direct gas-fired tumble dryers of types B22D and B23D, with a nominal heat input not exceeding 6 kW. This standard defines specific requirements and test methods for measuring both gas and electrical energy consumption of these appliances, promoting energy efficiency in household drying equipment.
This standard applies exclusively to domestic dryers and excludes catalytic combustion appliances, industrial-use dryers, condensing dryers, and appliances designed for special environments such as vehicles or corrosive atmospheres. EN 1458-2:2011 supports the implementation of energy-saving practices in gas-fired tumble dryers and complements part 1 of the standard, which addresses safety and construction requirements.
Key Topics
Energy Consumption Requirements
Appliances covered by EN 1458-2:2011 must measure gas and electrical consumption accurately. The gas energy consumption is limited to not exceed 1.11 kWh/kg of standard load, ensuring efficiency.Measurement Methods
Gas consumption is recorded using a calibrated gas meter under specified reference conditions (15 °C and 1013.25 mbar). Electrical energy consumption is measured according to the established procedures in EN 61121 (a standard for tumble dryer performance measurement).Test Conditions and Gas Types
Testing involves using various reference gases per the appliance category defined in EN 1458-1:2011. The standard includes a detailed formula for correcting gas volume to standard reference conditions, considering ambient pressure, gas temperature, and vapor pressure to ensure precise results.Scope Limitations
- Excludes industrial and catalytic combustion appliances
- Not applicable to condensing dryers or appliances for special environments
- Covers only type testing, not routine production tests
Normative References
The standard references several other important documents, such as EN 1458-1:2011 for safety requirements and EN 61121 for performance measurement methods.
Applications
Household Gas-fired Tumble Dryers
Manufacturers and testing laboratories use EN 1458-2:2011 to verify the energy performance of gas-fired tumble dryers, ensuring compliance with European regulations and improving energy efficiency.Energy Efficiency Certification
This standard provides a benchmark for evaluating the energy consumption of gas-powered household dryers, which can be utilized by certification bodies to validate energy ratings and promote environmentally friendly appliances.Comparative Performance Analysis
By standardizing gas and electrical energy measurement, EN 1458-2 enables consumers, manufacturers, and regulators to compare gas-fired tumble dryers with electric models, assisting informed purchasing decisions and policy-making.Regulatory Compliance
Aligns with EU directives related to energy use and appliance safety, helping manufacturers meet mandatory energy efficiency standards and enabling national standards organizations in Europe to harmonize their regulations.
Related Standards
- EN 1458-1:2011 - Details safety, construction, and marking requirements for the same class of gas-fired tumble dryers.
- EN 61121 - Specifies test methods for measuring the performance of household tumble dryers, used here to standardize electrical energy consumption measurement.
- EN 437:2003+A1:2009 - Defines test gases, pressures, and categories relevant to gas appliances.
- EN 60456:2005 - Pertains to measuring performance in clothes washing machines, providing broader context for textile care appliances.
- EN ISO 139:2005 - Standardizes text conditioning atmospheres that impact appliance testing conditions.
Keywords: EN 1458-2, domestic gas-fired tumble dryers, energy efficiency, gas energy consumption, electrical energy consumption, household appliance standards, CEN, gas dryer testing, tumble dryer energy use, European Standard, energy rational use.
Frequently Asked Questions
EN 1458-2:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy". This standard covers: This European Standard specifies the requirements and test methods for rational use of energy, including measurement of both gas and electrical energy consumption, of domestic direct gas-fired tumble dryers, of types B22D and B23D, of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances". This European Standard does not apply to: a) catalytic combustion appliances; b) appliances designed exclusively for industrial purposes; c) appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere; d) appliances of the condensing type wherein the heated air and products of combustion used for the drying process are dehumidified by cooling with water or air; e) appliances intended to be used in vehicles or on board ships or aircraft. This European Standard covers type testing only.
This European Standard specifies the requirements and test methods for rational use of energy, including measurement of both gas and electrical energy consumption, of domestic direct gas-fired tumble dryers, of types B22D and B23D, of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances". This European Standard does not apply to: a) catalytic combustion appliances; b) appliances designed exclusively for industrial purposes; c) appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere; d) appliances of the condensing type wherein the heated air and products of combustion used for the drying process are dehumidified by cooling with water or air; e) appliances intended to be used in vehicles or on board ships or aircraft. This European Standard covers type testing only.
EN 1458-2:2011 is classified under the following ICS (International Classification for Standards) categories: 97.060 - Laundry appliances. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1458-2:2011 has the following relationships with other standards: It is inter standard links to EN 1458-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1458-2:2011 is associated with the following European legislation: EU Directives/Regulations: 2009/142/EC, 90/396/EEC; Standardization Mandates: M/BC/CEN/89/6. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1458-2:2011 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 2: Rationelle EnergieverwendungSèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 2: Utilisation rationnelle de l'énergieDomestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy97.060Aparati za nego perilaLaundry appliancesICS:Ta slovenski standard je istoveten z:EN 1458-2:2011SIST EN 1458-2:2012en,fr,de01-januar-2012SIST EN 1458-2:2012SLOVENSKI
STANDARDSIST EN 1458-2:19991DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1458-2
November 2011 ICS 97.060 Supersedes EN 1458-2:1999English Version
Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy
Sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 2: Utilisation rationnelle de l'énergie
Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 2: Rationelle Energieverwendung This European Standard was approved by CEN on 25 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1458-2:2011: ESIST EN 1458-2:2012
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...