EN ISO 9554:2005
(Main)Fibre ropes - General specifications (ISO 9554:2005)
Fibre ropes - General specifications (ISO 9554:2005)
This European Standard specifies the general characteristics of fibre ropes and their constituent material. It is intended to be used in conjunction with the individual fibre rope standard which covers physical properties and specific requirements for that particular type product.
This European standard does not intend to address all of the safety matters associated with its use. It is the responsibility of the user to select a size and physical properties to meet the requirements of the application and to determine the applicability of regulatory limitations prior to its use.
This European standard also gives some information on use of fibre ropes and also on their inspection and retirement criteria.
Faserseile - Allgemeine Festlegungen (ISO 9554:2005)
Diese Internationale Norm legt die allgemeinen Eigenschaften von Faserseilen sowie die Werkstoffe, aus denen sie hergestellt sind, fest. Sie soll zusammen mit den einzelnen Faserseilnormen, die die physikalischen Eigenschaften und die speziellen Anforderungen für den bestimmten Produkttyp abdecken, angewendet werden.
Diese Internationale Norm enthält auch einige Angaben über die Verwendung von Faserseilen sowie über die Überprüfung und die Ablegekriterien.
Diese Internationale Norm beabsichtigt nicht, alle Sicherheitsaspekte im Zusammenhang mit ihrer Verwen-dung zu behandeln. Es liegt in der Verantwortung des Anwenders, eine Seilgröße und die physikalischen Eigenschaften auszuwählen, um die Anforderungen der Anwendung zu erfüllen und die Anwendbarkeit der vorgeschriebenen Einschränkungen vor ihrer Benutzung zu bestimmen.
Cordages en fibres - Spécifications générales (ISO 9554:2005)
La présente Norme européenne prescrit les caractéristiques générales des cordages en fibres et de leur matière constitutive. Elle est destinée à être utilisée conjointement avec les normes particulières à chaque fibre qui traitent spécifiquement des propriétés physiques et des exigences particulières de chacun des types de produit.
La présente Norme européenne n'a pas pour but d'aborder toutes les questions de sécurité liées l'utilisation du produit. Il incombe à l'utilisateur de choisir la taille et les propriétés physiques qui correspondent aux exigences qui s'appliquent à son cas et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
La présente Norme européenne donne par ailleurs quelques indications sur l'utilisation des cordages en fibres, ainsi que sur leur inspection et les critères de rejet.
Vlaknene vrvi - Splošne zahteve (ISO 9554:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2005
1DGRPHãþD
SIST EN 701:1999
Vlaknene vrvi - Splošne zahteve (ISO 9554:2005)
Fibre ropes - General specifications (ISO 9554:2005)
Faserseile - Allgemeine Festlegungen (ISO 9554:2005)
Cordages en fibres - Spécifications générales (ISO 9554:2005)
Ta slovenski standard je istoveten z: EN ISO 9554:2005
ICS:
59.080.50 Vrvi Ropes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9554
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 59.080.50 Supersedes EN 701:1995
English version
Fibre ropes - General specifications (ISO 9554:2005)
Cordages en fibres - Spécifications générales (ISO Faserseile - Allgemeine Festlegung (ISO 9554:2005)
9554:2005)
This European Standard was approved by CEN on 17 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9554:2005: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 9554:2005) has been prepared by Technical Committee CEN/TC 248 "Textiles and
textile products", the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC
38 "Textiles".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2005, and conflicting national standards shall be withdrawn
at the latest by August 2005.
This document supersedes EN 701:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
INTERNATIONAL ISO
STANDARD 9554
Second edition
2005-02-01
Fibre ropes — General specifications
Cordages en fibres — Spécifications générales
Reference number
ISO 9554:2005(E)
©
ISO 2005
ISO 9554:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
ISO 9554:2005(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Manufacture. 1
4 Lay length or pitch length . 4
5 Requirements . 4
6 Marking and labelling . 4
7 Packaging, invoicing and delivered length . 5
8 Testing. 6
9 Visual quality control. 6
10 Certification . 6
11 Instructions for use. 6
Annex A (informative) Typical characteristics of the yarns for man-made and natural fibres. 7
Annex B (informative) Information on defects and variances . 9
Annex C (informative) Information for use and maintenance to be provided by the manufacturer . 11
Bibliography . 20
ISO 9554:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9554 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical
Committee ISO/TC 38, Textiles, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 9554:1991), which has been technically revised.
iv © ISO 2005 – All rights reserved
INTERNATIONAL STANDARD ISO 9554:2005(E)
Fibre ropes — General specifications
1 Scope
This International Standard specifies the general characteristics of fibre ropes and their constituent materials.
It is intended to be used in conjunction with the standards for the individual types of fibre rope, which cover the
physical properties and specific requirements for that particular product type.
This International Standard also gives some information on the use of fibre ropes and also on their inspection
and retirement criteria.
This International Standard does not intend to address all of the safety matters associated with its use. It is the
responsibility of the user to select a rope type of the size and with the physical properties to meet the
requirements of the application and to determine the applicability of regulatory limitations prior to its use.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1140, Fibre ropes — Polyamide — 3-, 4- and 8-strand ropes
ISO 1141, Fibre ropes — Polyester — 3-, 4- and 8-strand ropes
ISO 2307, Fibre ropes — Determination of certain physical and mechanical properties
EN 14687, Mixed polyolefin fibre ropes
3 Manufacture
3.1 Constituent materials
The following materials are considered in this International Standard:
a) natural fibres:
sisal,
manila,
hemp;
ISO 9554:2005(E)
b) man-made fibres:
polyamide,
polyester,
polypropylene,
polyethylene,
mixed polyolefin.
Many new fibres are available. Specific application should involve technical discussions with rope
manufacturers (see Annex A).
3.2 Construction and structure
Unless otherwise specified, 3-, 4- and 6-strand laid ropes shall be Z-twist (right-hand lay), their strands S-twist
and their roping yarns Z-twist.
The 8-strand braided ropes shall consist of four S-twist strands and four Z-twist strands arranged so that S-
twist strands alternate (individually or on pairs) with Z-twist strands (individually or on pairs).
The 12-strand braided ropes shall consist of six S-twist strands and six Z-twist strands arranged so that S-
twist strands alternate (individually or on pairs) with Z-twist strands (individually or on pairs).
A double-braided rope shall consist of a number of strands that are braided to form a core, around which are
braided additional strands to form a sheath. The core lies coaxially within the sheath. The number of strands
varies, based upon the size of the rope.
Each strand shall consist of an equal number of rope yarns sufficient to provide the characteristics specified in
the International and European Standards dealing with each fibre. For ropes of reference number 36 or higher,
the number of yarns in each strand may differ by one yarn or ± 2.5% from the mean number of yarns in the
strand.
The ropes and their strands shall be continuous, without splice for standard delivered lengths or shorter
lengths.
Yarns may be joined as necessary.
NOTE National legislations can place additional requirements and rope construction.
3.3 Treatment
3.3.1 Polyamide and polyester ropes
3.3.1.1 Polyamide and polyester ropes shall be produced in such a way as to ensure the lay and the
dimensional stability. Except if type 2 is ordered, a heat setting shall be used to ensure that subsequent
shrinkage in use is minimal.
3.3.1.2 Polyamide and polyester laid ropes that are required to have a heat setting on the rope to ensure
lay and dimensional stability are designated as type 1 ropes in ISO 1140 and ISO 1141.
3.3.1.3 In other cases, polyamide and polyester laid ropes that are not required to have a heat setting on
the rope are designated type 2 ropes in ISO 1140 and ISO 1141.
In this case, stabilization, if any, may occur for the fibre or for the twisted yarn.
2 © ISO 2005 – All rights reserved
ISO 9554:2005(E)
3.3.1.4 The ropes shall be supplied in their natural state without additives to weight the rope or coating
treatment.
The fibre producer or the rope manufacturer may apply lubricants for enhanced performance. The total
amount of additives or extractable materials shall not exceed 2,5 %.
3.3.1.5 The colour of the rope shall be natural unless otherwise requested.
Upon request of the purchaser, the manufacturer may use a coating or impregnation of the product for special
applications.
3.3.1.6 The figures for linear density and minimum breaking force are the same for type 1 and type 2
ropes.
3.3.2 Polypropylene and polyethylene ropes
Polypropylene and polyethylene ropes shall be protected against deterioration due to sunlight. Any ultraviolet-
(UV-) inhibiting system may be used, such as light stabilizers, pigmentation using carbon black, iron(III) oxide
(Fe O ) or any other colouring product or special inhibitor.
2 3
The inhibiting system used should ensure the expected performance in usage under the foreseen
geographical areas for a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.