EN ISO 2400:2012

Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)

This International Standard specifies requirements for the dimensions, material and manufacture of a steel block for calibrating ultrasonic test equipment used in manual testing.

Zerstörungsfreie Prüfung - Ultraschallprüfung - Beschreibung des Kalibrierkörpers Nr 1 (ISO 2400:2012)

Diese Internationale Norm legt die Anforderungen an Abmessungen, Werkstoff und Herstellung eines Stahlkörpers fest, der zur Justierung der Ultraschallprüfausrüstung dient, die bei der Handprüfung verwendet werden.

Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage n° 1 (ISO 2400:2012)

La présente Norme internationale spécifie les exigences relatives aux dimensions, au matériau et à la fabrication de l'un des modèles de blocs d'acier qui servent à étalonner l'équipement d'essai par ultrasons utilisé lors de contrôles manuels.

Neporušitveno preskušanje - Ultrazvočne preiskave - Specifikacije za umeritveni vzorec št. 1 (ISO 2400:2012)

Ta mednarodni standard določa zahteve za mere, material in proizvodnjo jeklenih vzorcev za umerjanje ultrazvočne preskusne opreme, ki se uporablja pri ročnem preskušanju.

General Information

• Status: Published
• Publication Date: 14-Sep-2012
• Withdrawal Date: 30-Mar-2013
• ICS: 19.100 - Non-destructive testing
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 2 - Ultrasonic testing
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Sep-2012
• Due Date: 09-Nov-2013
• Completion Date: 15-Sep-2012
• Ref Project: SIST EN ISO 2400:2013 - Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1 (ISO 2400:2012)

Relations

• Replaces: EN 12223:1999 - Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2400:2013
01-februar-2013
1DGRPHãþD
SIST EN 12223:2000
1HSRUXãLWYHQRSUHVNXãDQMH8OWUD]YRþQHSUHLVNDYH6SHFLILNDFLMH]DXPHULWYHQL
Y]RUHFãW,62
Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1
(ISO 2400:2012)
Zerstörungsfreie Prüfung - Ultraschallprüfung - Beschreibung des Kalibrierkörpers Nr 1
(ISO 2400:2012)
Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc
d'étalonnage n° 1 (ISO 2400:2012)
Ta slovenski standard je istoveten z: EN ISO 2400:2012
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN ISO 2400:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2400:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 2400:2013


EUROPEAN STANDARD
EN ISO 2400

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2012
ICS 25.160.40 Supersedes EN 12223:1999
English Version
Non-destructive testing - Ultrasonic testing - Specification for
calibration block No. 1 (ISO 2400:2012)
Essais non destructifs - Contrôle par ultrasons - Zerstörungsfreie Prüfung - Ultraschallprüfung -
Spécifications relatives au bloc d'étalonnage n° 1 (ISO Beschreibung des Kalibrierkörpers Nr 1 (ISO 2400:2012)
2400:2012)
This European Standard was approved by CEN on 14 September 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2400:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2400:2013
EN ISO 2400:2012 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 2400:2013
EN ISO 2400:2012 (E)
Foreword
This document (EN ISO 2400:2012) has been prepared by Technical Committee CEN/TC 138 “Non-
destructive testing”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 135 "Non-destructive testing".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by mars 2013, and conflicting national standards shall be withdrawn at
the latest by mars 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12223:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 2400:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 2400:2013
INTERNATIONAL ISO
STANDARD 2400
Second edition
2012-09-15
Non-destructive testing — Ultrasonic
testing — Specification for calibration
block No. 1
Essais non destructifs — Contrôle par ultrasons — Spécifications
o
relatives au bloc d’étalonnage n 1
Reference number
...