EN 13674-1:2003

Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above

This European Standard specifies Vignole railway rails of 46 kg/m and greater linear mass, for general and high speed railway track usage.
Seven pearlitic steel grades are specified covering a hardness range of 200 to 390 HBW and include non heat treated carbon manganese steels; non heat treated alloy steels; and heat treated carbon manganese and low alloy steels.
There are 21 rail profiles specified in this Standard.
Two classes of rail straightness are specified, differing in requirements for straightness, surface flatness and crown profile. Two classes of profile tolerances are specified.

Bahnanwendungen - Oberbau - Schienen - Teil 1: Vignolschienen ab 46 kg/m

Diese Europäische Norm enthält Festlegungen für Vignolschienen mit einer längenbezogenen Masse ab 46 kg/m für normale und Hochgeschwindigkeitsstrecken im Eisenbahnwesen.
Sieben perlitische Stahlsorten in einem Härtebereich zwischen 200 HBW  und 390 HBW sind festgelegt. Die Schienen sind entweder nichtwärmebehandelt und bestehen aus Kohlenstoff-Mangan-Stahl bzw. legiertem Stahl oder sind wärmebehandelt und bestehen aus Kohlenstoff-Mangan-Stahl bzw. niedriglegiertem Stahl.
In dieser Norm sind 21 Schienenprofile festgelegt.
Zwei Schienenklassen sind festgelegt, die sich hinsichtlich der Anforderungen an die Geradheit, die Fahrflächenebenheit und das Kopfprofil unterscheiden. Für die Profiltoleranzen sind drei Klassen festgelegt.

Applications ferroviaires - Voie - Rails - Partie 1: Rails vignole de masse supérieure ou égale à 46 kg/m

La présente partie de la Norme européenne spécifie les rails ferroviaires Vignole symétriques de masse linéaire supérieure ou égale à 46 kg/m, destinés à l'usage des voies classiques et à grande vitesse.
Sept nuances d'acier perlitique sont spécifiées représentant une fourchette de dureté comprise entre 200 HBW et 390 HBW et incluant :
- les aciers non traités thermiquement au carbone manganèse ;
- les aciers alliés non traités thermiquement ;
- les aciers traités thermiquement au carbone manganèse ;
- les aciers faiblement alliés traités thermiquement.
21 profils de rail sont spécifiés dans la présente norme.
Deux classes de rectitudes des rails sont spécifiées, différenciées par les exigences de rectitude, la planéité de la surface et le bombé du champignon. Deux classes de tolérances de profils sont également spécifiées.

Železniške naprave – Zgornji ustroj – Tirnica – 1.del: Vignolove tirnice z maso 46kg/m in več

General Information

• Status: Withdrawn
• Publication Date: 23-Sep-2003
• Withdrawal Date: 31-Oct-2007
• ICS: 45.080 - Rails and railway components
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 1/WG 4 - Rails
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Nov-2007
• Completion Date: 01-Nov-2007
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Ref Project: SIST EN 13674-1:2004 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above

Relations

• Merged Into: EN 13674-1:2003+A1:2007 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Oberbau - Schienen - Teil 1: Vignolschienen ab 46 kg/mApplications ferroviaires - Voie - Rails - Partie 1: Rails vignole de masse supérieure ou égale a 46 kg/mRailway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13674-1:2003SIST EN 13674-1:2004en01-junij-2004SIST EN 13674-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13674-1September 2003ICS 45.080English versionRailway applications - Track - Rail - Part 1: Vignole railway rails46 kg/m and aboveApplications ferroviaires - Voie - Rails - Partie 1: Railsvignole de masse supérieure ou égale à 46 kg/mBahnanwendungen - Oberbau - Schienen - Teil 1:Vignolschienen ab 46 kg/mThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13674-1:2003 ESIST EN 13674-1:2004

Rail profiles.44Annex B (normative)
Standard test method for the determination of the plane strain fracturetoughness (KIc) of rails.68Annex C (normative)
Method for the determination of rail foot surface longitudinal residual stresses.74Annex D (normative)
Limiting sulfur prints.77Annex E (normative)
Profile and drilling gauges.91Annex F (informative)
Comparison of steel designations referred to in this standard compared tothose in EN 10027-1 and EN 10027-2.104Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.105Bibliography.106SIST EN 13674-1:2004
...