Explosives for civil uses - Detonators and relays - Part 16: Determination of delay accuracy

This European Standard specifies a method for determining the delay time accuracy of detonators and surface connectors with pyrotechnic delay elements. It does not apply to those with an electronic time delay.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 16: Bestimmung der Verzögerungsgenauigkeit

Anwendungsbereich
Diese Norm beschreibt ein Verfahren für die Bestimmung der Genauigkeit der Verzögerungszeit von Zündern und Oberflächenverbindern (Verzögerungselementen).
Diese Norm gilt nur für Zünder mit pyrotechnischem Verzögerungselement. Sie gilt nicht für Zünder mit elektronischer Zeitverzögerung.

Explosifs à usage civil - Détonateurs et relais - Partie 16 : Détermination de la précision du retard

La présente Norme européenne spécifie une méthode permettant de déterminer la précision du temps de retard des détonateurs et des connecteurs de surface comportant des éléments retardateurs pyrotechniques. Elle ne s'applique pas à ceux comportant un retardateur électronique.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 16. del: Ugotavljanje časa zakasnitve

General Information

Status
Published
Publication Date
16-Dec-2003
Withdrawal Date
29-Jun-2004
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
30-Jul-2015

Relations

Buy Standard

Standard
EN 13763-16:2004
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 16: Bestimmung der VerzögerungsgenauigkeitExplosifs a usage civil - Détonateurs et relais - Partie 16: Détermination de la précision du retardExplosives for civil uses - Detonators and relays - Part 16: Determination of delay accuracy71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-16:2003SIST EN 13763-16:2004en01-februar-2004SIST EN 13763-16:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-16December 2003ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 16:Determination of delay accuracyExplosifs à usage civil - Détonateurs et relais - Partie 16:Détermination de la précision du retardExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 16: Bestimmung derVerzögerungsgenauigkeitThis European Standard was approved by CEN on 10 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-16:2003 E

Range of applicability of the test method.9Annex B (normative)
Calculation of results.10Annex C (informative)
Guidance for theoretical verification.14Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.19

i
£ 2is
(is is the series firing current for the type of detonator inquestion) with an accuracy of ± 1,0 %.5.2for non-electric detonators/surface connectors, an initiating device for initiating shock tubes (percussioncap, spark or initiating detonator providing that the shock tube and measuring equipment are protected againstfragments from the detonator).5.3timer or oscilloscope to measure the delay time between the start pulse and the stop pulse with an accuracyof 0,1 ms.5.4means for providing a start pulse to the timer/oscilloscope consisting for example of:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.