EN ISO 15996:2005/A1:2007
(Amendment)Gas cylinders - Residual pressure valves - General requirements and type testing - Amendment 1 (ISO 15996:2005/Amd 1:2007)
Gas cylinders - Residual pressure valves - General requirements and type testing - Amendment 1 (ISO 15996:2005/Amd 1:2007)
2006-05-23 40.20 on 2006-02-27 in ISO, ISO/CS failed to notify CMC, consequently application of resolution BT C56/1993 issuing PQ on DIS, with the aim to launch 50.20 in parallel.
Gasflaschen - Restdruckventile - Allgemeine Anforderungen und Typprüfung (ISO 15996:2005/Amd 1:2007)
Diese Internationale Norm enthält Anforderungen an Restdruckventile, mit oder ohne Rückschlagfunktion, für Gasflaschen und Prüfverfahren zur Prüfung dieser Ventile für die Typzulassung.
Diese Internationale Norm gilt für Ventile an Gasflaschen mit einem Fassungsraum bis zu 150 l, die für verdichtete, verflüssigte und unter Druck gelöste Gase vorgesehen sind.
Diese Internationale Norm gilt nicht für Ventile an Feuerlöschern, im Kryo- Bereich und für Flüssiggas.
Diese Anforderungen gelten zusätzlich zu den in ISO 10297 festgelegten Angaben
Bouteilles à gaz - Robinets à pression résiduelle - Exigences générales et essais de type - Amendement 1 (ISO 15996:2005/Amd 1:2007)
Plinske jeklenke - Ventili z ostankom tlaka - Splošne zahteve in preskušanje tipa - Dopolnilo 1 (ISO 15996:2005/Amd 1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2008
Plinske jeklenke - Ventili z ostankom tlaka - Splošne zahteve in preskušanje tipa -
Dopolnilo 1 (ISO 15996:2005/Amd 1:2007)
Gas cylinders - Residual pressure valves - General requirements and type testing -
Amendment 1 (ISO 15996:2005/Amd 1:2007)
Gasflaschen - Restdruckventile - Allgemeine Anforderungen und Typprüfung (ISO
15996:2005/Amd 1:2007)
Bouteilles à gaz - Robinets à pression résiduelle - Exigences générales et essais de type
- Amendement 1 (ISO 15996:2005/Amd 1:2007)
Ta slovenski standard je istoveten z: EN ISO 15996:2005/A1:2007
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 15996:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 23.020.30
English Version
Gas cylinders - Residual pressure valves - General
requirements and type testing - Amendment 1 (ISO
15996:2005/Amd 1:2007)
Bouteilles à gaz - Robinets à pression résiduelle - Gasflaschen - Restdruckventile - Allgemeine
Exigences générales et essais de type - Amendement 1 Anforderungen und Typprüfung (ISO 15996:2005/Amd
(ISO 15996:2005/Amd 1:2007) 1:2007)
This amendment A1 modifies the European Standard EN ISO 15996:2005; it was approved by CEN on 30 November 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15996:2005/A1:2007: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
This amendment (EN ISO 15996:2005/A1:2007) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This Amendment to the European Standard EN ISO 15996:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and
conflicting national standards shall be withdrawn at the latest by June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15996:2005 has been approved by CEN as a EN ISO 15996:2005/A1:2007 without any
modification.
INTERNATIONAL ISO
STANDARD 15996
First edition
2005-04-01
AMENDMENT 1
2007-12-01
Gas cylinders — Residual pressure
valves — General requirements and type
testing
AMENDMENT 1
Bouteilles à gaz — Robinets à pression résiduelle — Exigences
générales et es
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.