iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16430-1:2014

(Main)

Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements

Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements

This European Standard defines the technical specifications and requirements of fan assisted radiators, convectors and trench convectors for permanent installation in central heating systems which are factory assembled or kits.
This European Standard covers fan assisted radiators and convectors fed with water at temperatures below 120 °C, supplied by a remote heating source.
This European Standard also applies for radiators and convectors according to EN 442-1 to determine their dry cooling capacity.
This European Standard does not apply to discrete heating appliances.
This European Standard also defines the additional common data that the manufacturer is to provide to the trade in order to ensure the correct application of the products.
This European Standard applies to the testing for the determination of thermal output and dry cooling capacity of
-   fan assisted radiators and convectors, provided the heater/cooler has a dedicated fan or fans;
-   trench convectors with and without fan(s), provided the fan(s) are dedicated;
-   ventilation radiators and convectors (only heating);
-   not fan assisted radiators and convectors (only cooling).

Gebläseunterstützte Heizkörper, Konvektoren und Unterflurkonvektoren - Teil 1: Technische Spezifikationen und Anforderungen

Die vorliegende Europäische Norm legt die technischen Spezifikationen und Anforderungen an gebläseunterstützte Heizkörper, Konvektoren und Unterflur¬konvektoren zur dauerhaften Installation in die Zentral¬heizungsanlage fest.
Diese Europäische Norm behandelt Heizkörper und Konvektoren zum Betrieb mit Wasser oder Dampf unter 120 °C aus einer getrennten Wärmequelle.
Diese Europäische Norm gilt nicht für eigenständige Heizgeräte.
Diese Europäische Norm legt außerdem zusätzliche allgemeine Daten fest, die der Hersteller dem Markt zur Verfügung stellen muss, um die richtige Verwendung der Produkte sicherzustellen.
Diese Europäische Norm gilt für die Prüfung der Wärmeleistung und der Kühlleistung von gebläseunterstützten Heizkörpern, Konvektoren und Unterflur¬konvektoren, d. h. für:
-   gebläseunterstützte Heizkörper und Konvektoren, vorausgesetzt der Wärmeerzeuger/Kühler besitzt ein oder mehrere fest eingebaute Gebläse;
-   Unterflurkonvektoren mit und ohne Gebläse, vorausgesetzt das/die Gebläse ist/sind fest eingebaut;
-   Lüftungsheizkörpern und -konvektoren (nur Heizung).
Diese Europäische Norm gilt außerdem für Heizkörper und Konvektoren nach EN 442-2, um deren Kühlleistung zu bestimmen.

Radiateurs assistés par ventilateur, convecteurs et convecteurs de caniveaux - Partie 1 : Spécifications techniques et exigences

Cette Norme européenne définit les spécifications techniques et les exigences requises pour les radiateurs avec ventilateur, convecteurs et convecteurs de caniveaux destinés à être installés durablement  dans les systèmes de chauffage central.
La présente Norme européenne couvre les radiateurs et convecteurs fonctionnant avec de l’eau ou de la vapeur à des températures inférieures à 120 °C, alimentés  par une source de chaleur éloignée.
Cette Norme européenne ne s’applique pas aux appareils de chauffage individuels.
Cette Norme européenne définit également les données additionnelles usuelles que le fabricant doit fournir à la profession pour assurer une mise en oeuvre correcte des produits.
La présente Norme européenne s’applique aux essais de puissance thermique et de puissance thermique en mode rafraîchissement des radiateurs avec ventilateur, convecteurs et convecteurs de caniveaux, c’est à dire
-   radiateurs et convecteurs avec ventilateur, sous réserve que l’élément chauffant/rafraîchissant comporte un ou plusieurs ventilateurs dédiés ;
-   convecteurs de caniveaux avec et sans ventilateur(s), sous réserve que le(s) ventilateur(s) soi(en)t dédié(s) ;
-   radiateurs et convecteurs de ventilation (uniquement chauffants).
Cette Norme européenne s’applique également aux radiateurs et convecteurs selon l’EN 442-2 pour déterminer leur puissance thermique en mode rafraîchissement.

Radiatorji z ventilatorjem, konvektorji in talni konvektorji - 1. del: Tehnične specifikacije in zahteve

Ta evropski standard določa tehnične specifikacije in zahteve radiatorjev z ventilatorjem, konvektorjev in talnih konvektorjev za trajno vgradnjo v sisteme centralnega ogrevanja.
Ta evropski standard zajema radiatorje in konvektorje, polnjene z vodo ali paro pri temperaturah pod 120 °C, ki jo dovaja oddaljeni vir ogrevanja.
Ta evropski standard se ne uporablja za ločene ogrevalne naprave.
Ta evropski standard opredeljuje tudi dodatne skupne podatke, ki jih mora proizvajalec zagotoviti za pravilno uporabo izdelkov.
Ta evropski standard se uporablja za preskušanje toplotnega oddajanja in hladilne moči končnih prenosnikov toplote z ventilatorjem, konvektorjev in talnih konvektorjev tj
– radiatorjev z ventilatorji in konvektorjev, če ima grelnik/hladilnik namenski ventilator ali ventilatorje,
– talnih konvektorjev z ventilatorji ali brez njih, če so ventilatorji namenski,
– prezračevalnih radiatorjev in konvektorjev (samo ogrevanje).
Ta evropski standard velja tudi za radiatorje in konvektorje v skladu s standardom EN 442-2 za določitev njihove zmogljivosti hlajenja.

General Information

Status
Published
Publication Date
16-Dec-2014
ICS
91.140.10 - Central heating systems
Technical Committee
CEN/TC 130 - Space heating appliances without integral heat sources
Drafting Committee
CEN/TC 130/WG 10 - Fan Convectors
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
04-Jun-2020
Ref Project
SIST EN 16430-1:2015 - Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements

Buy Standard

EN 16430-1:2015EN 16430-1:2015
PreviousNext
Standard
EN 16430-1:2015
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gebläseunterstützte Heizkörper, Konvektoren und Unterflurkonvektoren - Teil 1: Technische Spezifikationen und AnforderungenRadiateurs avec ventilateur, convecteurs et convecteurs de caniveaux - Partie 1: Spécifications techniques et exigencesFan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 16430-1:2014SIST EN 16430-1:2015en,fr,de01-marec-2015SIST EN 16430-1:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16430-1
December 2014 ICS 91.140.10 English Version
Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements
Radiateurs assistés par ventilateur, convecteurs et convecteurs de caniveaux
- Partie 1 : Spécifications techniques et exigences
Gebläseunterstützte Heizkörper, Konvektoren und Unterflurkonvektoren - Teil 1: Technische Spezifikationen und Anforderungen This European Standard was approved by CEN on 9 November 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16430-1:2014 ESIST EN 16430-1:2015

Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .5 4 Pretreatment and coating .5 5 Dimensional tolerances and pressure tightness .5 5.1 General .5 5.2 Material specification and wall thickness of wet heating surfaces .6 5.2.1 General .6 5.2.2 Finned tube convectors .6 5.2.3 Other materials .6 5.3 Leak testing .6 5.4 Pressure strength testing .6 5.5 Surface defects .7 6 Electrical and mechanical safety for fan assisted radiators .7 7 Noise emission .7 8 Thermal outputs and cooling capacity .7 8.1 Test method and laboratory .7 8.1.1 Thermal outputs .7 8.1.2 Cooling capacity .8 8.2 Aim of the test programme .8 8.3 Test data .8 8.4 Test report .8 9 Catalogue data .9 9.1 General .9 9.2 Identification code of the heating appliance .9 9.3 Thermal output .9 9.4 Cooling capacity .9 9.5 Noise emission . 10 9.6 Dimensions . 10 9.6.1 Radiators . 10 9.6.2 Convectors . 10 9.6.3 Fan assisted radiators and convectors . 11 9.6.4 Ventilation radiators and convectors . 11 9.7 Maximum operating pressure . 11 9.8 Maximum operating temperature . 11 9.9 Electrical connections . 11 9.10 Catalogue reference data . 12 10 Marking and labelling . 12
1 Also in relation to Regulation (EC) No 1907/2006 (REACH)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1264-1:2021(Main)
Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols
SIST EN 1264-1:2021

The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed for the purpose of thermal comfort.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the types E, F and G, see the EN ISO 11855 series.
The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to the EN 14037 series and EN 14240.
EN 1264-1 specifies system types and characteristics of water based surface embedded radiant heating and cooling systems.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1264-3:2021(Main)
Water based surface embedded heating and cooling systems - Part 3: Dimensioning
SIST EN 1264-3:2021

The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed for the purpose of thermal comfort.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the types E, F and G, see the EN ISO 11855 series.
The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to EN 14037 series and EN 14240.
EN 1264-3 specifies the use in practical engineering of the results coming from EN 1264-2 and EN 1264-5.
For heating systems, physiological limitations are taken into account when specifying the surface temperatures. In the case of floor heating systems the limitations are realized by a design based on the characteristic curves and limit curves determined in accordance with EN 1264-2.
For cooling systems, only a limitation with respect to the dew point is taken into account. In predominating practice, this means that physiological limitations are included as well.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1264-5:2021(Main)
Water based surface embedded heating and cooling systems - Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling
SIST EN 1264-5:2021

The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed for the purpose of thermal comfort.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the types E, F and G, see the EN ISO 11855 series.
The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to the EN 14037 series and EN 14240.
EN 1264-5 specifies the recalculation of values determined in EN 1264-2 for the system in question. It enables the conversion of the calculation and measurement results of EN 1264-2 into results for other surface orientations in the room, i.e. for ceiling and wall heating, as well as for the application as cooling surfaces, i.e. for floor, ceiling and wall cooling. The test results of EN 1264-2 are the basis of all calculation, whether or not the system in question is used for heating or cooling application.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1264-2:2021(Main)
Water based surface embedded heating and cooling systems - Part 2: Floor heating: Methods for the determination of the thermal output using calculations and experimental tests
SIST EN 1264-2:2021

The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed for the purpose of thermal comfort.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the types E, F and G, see the EN ISO 11855 series.
The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to the EN 14037 series and EN 14240.
EN 1264-2 specifies hot water floor heating systems. The application of EN 1264-5 requires the prior use of EN 1264-2. EN 1264-5 specifies the conversion of the thermal output of floor heating systems determined in EN 1264-2 into the thermal output of heating surfaces embedded in walls and ceilings as well as into the thermal output of cooling surfaces embedded in floors, walls and ceilings.
EN 1264-2 specifies the boundary conditions and the test methods for the determination of the thermal output of hot water floor heating systems as a function of the temperature difference between the heating medium and the room temperature.
The thermal output is tested by a calculation method and by a measurement method. The calculation method is applicable to systems corresponding to the definitions in EN 1264-1 (type A, B, C, D, H, I and J). The measurement method gives guidance for systems not corresponding to these definitions. The calculation method and the measurement method are consistent with each other and provide correlating and adequate test results.
The test results, expressed depending on further parameters, are the standard specific thermal output and the associated standard temperature difference between the heating medium and the room temperature as well as fields of characteristic curves showing the relationship between the specific thermal output and the temperature difference between the heating medium and the room.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1264-4:2021(Main)
Water based surface embedded heating and cooling systems - Part 4: Installation
SIST EN 1264-4:2021

The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed for the purpose of thermal comfort.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the types E, F and G, see the EN ISO 11855 series.
The systems specified in The EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to the EN 14037 series and EN 14240.
EN 1264-4 specifies uniform requirements for the design and the construction of heating and cooling floor, ceiling and wall structures to ensure that the heating/cooling systems are suited to the particular application.
The requirements specified by the EN 1264 series apply only to the components of the heating/cooling systems which are part of the heating/cooling system. EN 1264-4 does not cover other elements which are not part of the heating/cooling system.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 215:2019(Main)
Thermostatic radiator valves - Requirements and test methods
SIST EN 215:2019

This document specifies definitions, requirements and test methods for thermostatic radiator valves referred to hereafter as thermostatic valves.
This standard applies to two port thermostatic valves with or without pre-setting facility and thermostatic integrated valves with or without pre-setting facility for fitting to radiators in wet central heating installations up to a water temperature of 120 °C and a nominal pressure of PN 10.
This standard further specifies the dimensions, the materials and the connection details of four series of straight and angle pattern thermostatic radiator valves of nominal pressure ≤ PN 10.
This standard can be used as reference in a CEN/CENELEC Certification Mark System on thermostatic radiator valves.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14037-4:2016(Main)
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity
SIST EN 14037-4:2017

This European Standard defines the technical specifications and requirements for the definition of the cooling capacity of pre-fabricated ceiling mounted radiant panels according to the specifications of EN 14037 1:2016, 3.3.1. The test according to this standard requires the measurement of the thermal output according to EN 14037 2:2016 of the model.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14037-1:2016(Main)
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements
SIST EN 14037-1:2017

This European Standard defines technical specifications and requirements of free hanging prefabricated ceil-ing mounted radiant panels with an air gap between construction and the emitter (not embedded) fed with water at temperatures below 120 °C connected with a centralized heating supply source intended to be in-stalled in buildings.
The panels should be installed with an upper insulation.
The European Standard does not apply to independent heating devices.
The European Standard also defines the additional common data that the manufacturer has to provide to the trade in order to ensure the correct application of the products.
This European standard does not cover the performance of hanging accessories.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14037-2:2016(Main)
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output
SIST EN 14037-2:2017

This European Standard describes the test method and the test installation for determining the thermal out-put of pre-fabricated ceiling mounted radiant panels according to the specifications of EN 14037 1:2016, 3.3.1.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14037-5:2016(Main)
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output
SIST EN 14037-5:2017

This European Standard describes the test method and the test installation for determining the thermal output of ceiling mounted heating surfaces according to the specifications of prEN 14037-1:2011, 3.3.2, 3.3.3 and 3.3.4.
This part applies to determine thermal output when chilled ceilings according to EN 14240 are also used for heating.
NOTE   Test results according to this part cannot be compared with results according to EN 14037-2 because great discrepancies are given at open ceilings, convective components and heating surfaces without upper insulation.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day