Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints

This European Standard specifies a tensile bending method and a compression bending method for determining the failure stress of welded corners and welded T-joints made from unplasticized poly(vinyl chloride) (PVC-U) profiles.
It is applicable to PVC based profiles used for the fabrication of windows and doors.

Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung der Festigkeit verschweißter Ecken und T-Verbindungen

Diese Europäische Norm legt ein Zugbiegeverfahren und ein Druckbiegeverfahren zur Bestimmung der Bruchspannung von verschweißten Ecken und verschweißten T Verbindungen von Profilen aus weich¬macherfreiem Polyvinylchlorid (PVC U) fest.
Sie ist für Profile auf Basis von PVC anwendbar, die für die Herstellung von Fenstern und Türen verwendet werden.

Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination de la résistance des assemblages soudés en angle et en T

Le présent document spécifie une méthode d'essai de flexion par traction et une méthode d'essai de flexion par compression pour déterminer la contrainte de défaillance des assemblages soudés en angle et soudés en T obtenus à partir de profilés en polychlorure de vinyle non plastifié (PVC-U).
Le présent document s’applique aux profilés à base de PVC pour la fabrication de fenêtres et de portes.

Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje trdnosti kotnih varov in varov T

Ta evropski standard določa metodo nateznega upogibanja in metodo kompresijskega upogibanja za ugotavljanje obremenitev do okvare kotnih varov in varov T na neprevlečenih profilih iz trdega polivinilklorida (PVC-U).
Ta evropski standard se uporablja za profile iz trdega polivinilklorida za proizvodnjo oken in vrat.

General Information

Status
Published
Publication Date
30-Jan-2018
Withdrawal Date
30-Jul-2018
Current Stage

Relations

Buy Standard

Standard
EN 514:2018
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 514:2017
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 514:2018
01-april-2018
1DGRPHãþD
SIST EN 514:2001
Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje trdnosti
kotnih varov in varov T
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of
welded corners and T-joints
Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung der Festigkeit
verschweißter Ecken und T-Verbindungen
Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination de la
résistance des assemblages soudés en angles et en T
Ta slovenski standard je istoveten z: EN 514:2018
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
SIST EN 514:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 514:2018

---------------------- Page: 2 ----------------------

SIST EN 514:2018


EN 514
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2018
EUROPÄISCHE NORM
ICS 83.140.99 Supersedes EN 514:2000
English Version

Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the strength of welded corners and T-
joints
Plastiques - Profilés à base de poly(chlorure de vinyle) Kunststoffe - Profile auf Basis von Polyvinylchlorid
(PVC) - Détermination de la résistance des (PVC) - Bestimmung der Festigkeit verschweißter
assemblages soudés en angle et en T Ecken und T-Verbindungen
This European Standard was approved by CEN on 6 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 514:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 514:2018
EN 514:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
5.1 Tensile or compression testing machine . 4
5.2 Test arrangements . 4
6 Test specimen . 8
6.1 Welding of the corner test specimen . 8
6.2 Welding of the T-joint test specimen . 8
6.3 Tensile bending test specimen .
...

SLOVENSKI STANDARD
oSIST prEN 514:2017
01-januar-2017
Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Ugotavljanje
trdnosti kotnih varov in varov T
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and
doors - Determination of the strength of welded corners and T-joints
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern
und Türen - Bestimmung der Festigkeit verschweißter Ecken und T-Verbindungen
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres
et des portes - Détermination de la résistance des assemblages soudés en angle et en T
Ta slovenski standard je istoveten z: prEN 514
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
oSIST prEN 514:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 514:2017

---------------------- Page: 2 ----------------------
oSIST prEN 514:2017


DRAFT
EUROPEAN STANDARD
prEN 514
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2016
ICS 83.080.20; 83.140.99 Will supersede EN 514:2000
English Version

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the
fabrication of windows and doors - Determination of the
strength of welded corners and T-joints
Profilés de poly(chlorure de vinyle) non plastifié (PVC- Profile aus weichmacherfreiem Polyvinylchlorid (PVC-
U) pour la fabrication des fenêtres et des portes - U) zur Herstellung von Fenstern und Türen -
Détermination de la résistance des assemblages soudés Bestimmung der Festigkeit verschweißter Ecken und
en angle et en T T-Verbindungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 514:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 514:2017
prEN 514:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Terms and definitions . 4
3 Principle . 4
4 Apparatus . 4
5 Test piece . 7
6 Conditioning . 8
7 Procedure.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.