EN 1272:2017
(Main)Child care articles - Table mounted chairs - Safety requirements and test methods
Child care articles - Table mounted chairs - Safety requirements and test methods
This European Standard specifies safety requirements and test methods for table mounted chairs, intended for children who are able to sit unaided up to a maximum weight of 15 kg.
Artikel für Säuglinge und Kleinkinder - Tischhängesitze - Sicherheitstechnische Anforderungen und Prüfverfahren
Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für Tischhängesitze fest, die für Kinder bis zu einem Höchstgewicht von 15 kg bestimmt sind und die ohne fremde Hilfe sitzen können.
Articles de puériculture - Sièges de table - Exigences de sécurité et méthodes d'essai
La présente Norme européenne spécifie les exigences de sécurité et les méthodes d’essai relatives aux sièges de table destinés aux enfants capables de se tenir assis tous seuls, jusqu’à un poids maximum de 15 kg.
Izdelki za otroke - Stoli, ki se pritrdijo na mizo - Varnostne zahteve in preskusne metode
Ta evropski standard določa varnostne zahteve in ustrezne preskusne metode za stole, ki se pritrdijo na mizo, namenjene za otroke, ki lahko sedijo samostojno (starost približno 6 mesecev) ali so težki vključno do 15 kg. Ta evropski standard obravnava samo varnost in ne določa posameznih zasnov ali metod izdelave za same stole, ki se pritrdijo na mizo.
General Information
- Status
- Published
- Publication Date
- 23-May-2017
- Withdrawal Date
- 30-May-2018
- Technical Committee
- CEN/TC 252 - Child use and care articles
- Drafting Committee
- CEN/TC 252/WG 1 - Seating and body care
- Current Stage
- 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
- Start Date
- 02-Dec-2022
- Completion Date
- 02-Dec-2022
Relations
- Replaces
EN 1272:1998 - Child care articles - Table mounted chairs - Safety requirements and test methods - Effective Date
- 28-Jan-2015
Overview - EN 1272:2017 (table mounted chairs)
EN 1272:2017 is the CEN European Standard specifying safety requirements and test methods for table mounted chairs intended for children who can sit unaided up to a maximum weight of 15 kg. Prepared by CEN/TC 252, it supersedes EN 1272:1998 and adopts a hazard‑based approach to reduce mechanical, chemical and thermal risks associated with table‑mounted seating for infants and toddlers.
Key topics and technical requirements
- Scope & definitions - product types covered, age/weight limit (≤ 15 kg) and updated terminology.
- Test equipment and methods - standardized test probes, test masses (A, B, C), small torso probe, test foam, small parts cylinder, feeler gauge, loading pad, bouncing test machine and anchoring support tests.
- Chemical hazards - requirements for migration of heavy metals, formaldehyde limits and restrictions on colourants/primary aromatic amines.
- Thermal hazards - surface temperature limits and flame propagation requirements to limit burn risk.
- Mechanical hazards - hazard‑based requirements and tests covering:
- finger and head entrapment (including feet‑first head entrapment prevention),
- moving‑part compression and shear points,
- entanglement from cords/ribbons,
- choking and ingestion (small parts),
- suffocation (plastic packaging/decals),
- hazardous edges, corners and protrusions,
- inadequate structural integrity (static and dynamic strength), slippage of anchoring supports and bouncing performance,
- risks from falling (footrests, restraint systems, lateral protection/backrest height).
- Product information and marking - mandatory marking, durable labels, purchase information, and instructions for safe use; includes symbols for age/weight ranges and warnings.
Practical applications - who uses EN 1272:2017
- Manufacturers & designers of table mounted chairs use the standard to design safe products and select materials.
- Testing laboratories implement the specified test methods and equipment (e.g., test probes, bouncing machines, test masses) to verify compliance.
- Regulators, certification bodies and importers/retailers rely on EN 1272:2017 for conformity assessment and to support regulatory compliance within the EU/EFTA context.
- Product safety engineers use the hazard‑based clauses to conduct risk assessments and update instructions, labels and restraint requirements.
Related standards and references
- Prepared by CEN/TC 252 (Child use and care articles) and intended to be adopted as national standards across CEN member states.
- For comprehensive compliance, consult other CEN child care articles standards and national regulations referenced in the normative sections of EN 1272:2017.
EN 1272:2017 is essential for safe design, testing and regulatory compliance of table mounted chairs - integrating safety requirements, chemical limits and standardized test methods to protect infants and toddlers.
Frequently Asked Questions
EN 1272:2017 is a standard published by the European Committee for Standardization (CEN). Its full title is "Child care articles - Table mounted chairs - Safety requirements and test methods". This standard covers: This European Standard specifies safety requirements and test methods for table mounted chairs, intended for children who are able to sit unaided up to a maximum weight of 15 kg.
This European Standard specifies safety requirements and test methods for table mounted chairs, intended for children who are able to sit unaided up to a maximum weight of 15 kg.
EN 1272:2017 is classified under the following ICS (International Classification for Standards) categories: 97.140 - Furniture; 97.190 - Equipment for children. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1272:2017 has the following relationships with other standards: It is inter standard links to EN 1272:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1272:2017 is associated with the following European legislation: EU Directives/Regulations: 2001/95/EC; Standardization Mandates: M/527. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1272:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Izdelki za otroke - Stoli, ki se pritrdijo na mizo - Varnostne zahteve in preskusne metodeArtikel für Säuglinge und Kleinkinder - Tischhängesitze - Sicherheitstechnische Anforderungen und PrüfverfahrenArticles de puériculture - Sièges de table - Exigences de sécurité et méthodes d'essaiChild care articles - Table mounted chairs - Safety requirements and test methods97.190Otroška opremaEquipment for children97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 1272:2017SIST EN 1272:2017en,fr,de01-julij-2017SIST EN 1272:2017SLOVENSKI
STANDARDSIST EN 1272:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1272
May
t r s y ICS
{ yä s v râ
{ yä s { r Supersedes EN
s t y tã s { { zEnglish Version
Child care articles æ Table mounted chairs æ Safety requirements and test methods Articles de puériculture æ Sièges de table æ Exigences de sécurité et méthodes d 5essai
Artikel für Säuglinge und Kleinkinder æ Tischhängesitze æ Sicherheitstechnische Anforderungen und Prüfverfahren This European Standard was approved by CEN on
s y March
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t y tã t r s y ESIST EN 1272:2017
Examples of measuring cords, ribbons or similar parts . 18 8.4.2 Test method . 18 8.5 Choking and ingestion hazards (see A.4.4) . 19 8.5.1 Requirements . 19 8.5.2 Test methods . 19 8.6 Suffocation hazards (see A.4.5) . 20 8.6.1 Plastic packaging - Requirement . 20 8.6.2 Plastic decals . 20 8.7 Hazardous edges, corners and protruding parts (see A.4.6) . 20 8.8 Hazards from inadequate structural integrity (see A.4.7) . 20 8.8.1 Static strength . 20 8.8.2 Dynamic strength . 21 8.8.3 Slippage of anchoring supports . 21 Figure 10 — Test method for anchoring support . 22 8.8.4 Bouncing performance . 22 8.9 Hazards due to falling . 23 8.9.1 Footrests . 23 8.9.2 Restraint system . 23 8.9.3 Lateral protection and backrest height . 24 Figure 11 — Measurement of lateral protection and backrest height . 24 9 Product information . 25 9.1 General . 25 9.2 Marking of the product . 25 9.2.1 Requirements . 25 9.2.2 Durability of marking . 25 9.2.3 Test method for durability of marking . 25 9.3 Purchase information . 25 Figure 12 — Symbol for age and weight range . 26 9.4 Instructions for use . 26 Annex A (informative)
Rationales . 28 A.1 Introduction. 28 A.2 Chemical hazards (see Clause 6) . 28 SIST EN 1272:2017
Warnings . 30 Table B.1 — Translation of warning phrases . 30 Annex C (informative)
A–deviations . 35 SIST EN 1272:2017
Key Probe type 7 mm probe 12 mm probe Diameter A 0-0,17 0,1012+ Radius RB half of diameter A half of diameter A 1 Line scribed around circumference showing depth of penetration Figure 1 — Test probes with hemispherical end SIST EN 1272:2017
Key Probe type Mesh probe Diameter A 00,17− Diameter B 00,15,6− Radius RB half of diameter B Figure 2 — Test probe for mesh with hemispherical end 4.2 Test masses 4.2.1 Test mass A A rigid cylinder (160 ± 5) mm in diameter and (300 ± 5) mm in height, having a mass of 9 kg and with its centre of gravity in the centre of the cylinder. All edges shall have a radius of (5 ± 1) mm. Two anchorage points shall be provided. These shall be positioned (150 ± 2,5) mm from the base and at 180° to each other around the circumference (see Figure 3). Dimensions in millimetres
Key 1 Radius: (5 ± 1) mm 2 Two anchorage points Figure 3 — Test mass A SIST EN 1272:2017
Key 1 Radius: (5 ± 1) mm 2 Two anchorage points Figure 4 — Test mass B 4.2.3 Test mass C A steel rectangular mass AA1B1B
120 mm × 150 mm of 9 kg mass (see Figure 5). SIST EN 1272:2017
Figure 5 — Test mass C 4.3 Small torso probe The small torso probe shall be made from plastics or other hard, smooth material with dimensions as shown in Figure 6. Dimensions in millimetres
a) Top view b) Side view Key 1 Handle a 86 b 40 c 120 Figure 6 — Small torso probe SIST EN 1272:2017
Figure 7 — Small parts cylinder 4.6 Feeler gauge Gauge with a thickness of (0,4 ± 0,02) mm and an insertion edge radius of (3 ± 0,5) mm (Figure 8). Dimensions in millimetres
Figure 8 — Feeler gauge SIST EN 1272:2017
The tests are described in terms of the application of forces. Masses can however be used: 1 kg mass may be used for 10 N force. Unless otherwise specified, the test forces may be applied by any suitable device which does not adversely affect the results. 5.6 Order of test Unless otherwise stated the requirements of Clause 8 shall be assessed on the same table mounted chair in the order listed in this standard. 6 Chemical hazards 6.1 General If testing is required, a separate unconditioned sample shall be used for the tests in Clause 6. 6.2 Migration of certain elements (see A.2) The migration of elements from materials on exterior surfaces shall not exceed the limits listed in Table 1. Table 1 — Limits for heavy metals migration Element mg/kg Aluminium 70 000 Antimony 560 Arsenic 47 Barium 18 750 Boron 15 000 Cadmium 17 Chromium (III) 460 Chromium (VI) 0,2 SIST EN 1272:2017
Disperse Blue 124 111938 61951–51–7 Action limit Disperse Yellow 3 11855 2832–40–8 Action limit Disperse Orange 3 11855 730–40–5 Action limit
Disperse Orange 37/76/59 11132 12223–33–5 13301–61–6 Action limit Disperse Red 1 11110 2872–52–8 Action limit Solvent Yellow 1 11000 60–09–3 Action limit
Solvent Yellow 2 11020 60–11–7 Action limit Solvent Yellow 3 11160 97–56–3 Action limit Basic Red 9 42500 569–61–9 Action limit
Basic Violet 1 42535 8004–87–3 Action limit
Basic Violet 3 42555 548–62–9 Action limit Acid Red 26 16150 3761–53–3 Action limit Acid Violet 49 42640 1694–09–3 Action limit
Table 3 — Primary aromatic amines limits Compound CAS number Limit Benzidine 92–87–5 Action limit 2-Naphthylamine 91–59–8 Action limit 4-Chloroaniline 106–47–8 Action limit
3.3'-Dichlorobenzidine 91–94–1 Action limit 3,3'-Dimethoxybenzidine 119–90–4 Action limit 3.3'-Dimethylbenzidine 119–93–7 Action limit
o-Toluidine 95–53–4 Action limit 2-Methoxyaniline (o-Anisidine) 90–04–0 Action limit Aniline 62–53–3 Action limit
7 Thermal hazards (see A.3) 7.1 Requirement When tested in accordance with 7.2, there shall be no surface flash and the rate of spread of flame shall not exceed 50 mm/s. A separate sample, conditioned according to 5.2, may be used for these tests. SIST EN 1272:2017
Key L Length D Distance Figure 9 —
Examples of measuring cords, ribbons or similar parts 8.4.2 Test method The length of a cord, ribbon or similar part is measured from the fixing point on the table mounted chair to the free end of the cord, ribbon or similar part while a 25 N tensile force is applied. The peripheral dimension of a loop shall be measured while a 25 N tensile force is applied. SIST EN 1272:2017
...
The EN 1272:2017 standard outlines essential safety requirements and test methods for table mounted chairs designed for children who are capable of sitting unaided and weighing up to 15 kg. Its scope is specifically focused on ensuring that these childcare articles meet stringent safety guidelines, which are crucial for protecting young users during meal times and other activities. One of the standard's strengths is its comprehensive testing methods that evaluate the stability and durability of the chairs under various conditions. This requirement ensures that manufacturers produce reliable and safe products, which is vital in reducing the risk of accidents. The standard addresses the common hazards associated with table mounted chairs, such as tipping over or improper attachment to tables, providing a framework that encourages manufacturers to enhance design safety features. Moreover, the relevance of EN 1272:2017 cannot be overstated, as it acknowledges the importance of ergonomics and the developmental needs of children. By focusing on chairs that accommodate children up to an age where they can sit without support, the standard not only prioritizes their safety but also their comfort and usability. In conclusion, the EN 1272:2017 standard for child care articles, specifically table mounted chairs, provides a vital reference point for manufacturers in ensuring that their products are safe and effective for young children. The clarity of its safety requirements and robust testing methods contribute significantly to the overall goal of child safety in everyday environments.
Die Norm EN 1272:2017 legt wesentliche Sicherheitsanforderungen und Prüfmethoden für Tischstuhlprodukte fest, die speziell für Kinder entwickelt wurden. Diese Norm ist besonders relevant für Artikel im Bereich der Kinderbetreuung, da sie sicherstellt, dass die Tischstühle sicher für die Nutzung durch Kinder geeignet sind, die in der Lage sind, eigenständig zu sitzen, bis zu einem Maximalgewicht von 15 kg. Ein herausragendes Merkmal der Norm ist die detaillierte Beschreibung der Sicherheitsanforderungen. Diese Anforderungen stellen sicher, dass alle Tischstuhlmodelle strengen Tests unterzogen werden, um Unfälle und Verletzungen zu vermeiden. Die Einhaltung dieser Sicherheitsanforderungen fördert das Vertrauen der Eltern und Anbieter, dass die Produkte den höchsten Standards entsprechen. Ein weiterer positiver Aspekt von EN 1272:2017 ist die Klarheit und Präzision der Prüfmethoden, die für Hersteller und Prüfinstitutionen eine wichtige Orientierung bieten. Diese Prüfmethoden gewährleisten, dass die Stühle nicht nur funktional, sondern auch stabil und sicher sind, was in der Praxis entscheidend ist. Durch die Standardisierung dieser Tests wird ein einheitlicher Maßstab geschaffen, um die Sicherheit der Produkte auf dem Markt zu gewährleisten. Zudem stärkt diese Norm die Marktakzeptanz, da Sie als Hersteller durch die Einhaltung von EN 1272:2017 bewiesen haben, dass Sie qualitativ hochwertige und sichere Produkte gestalten. Dies kann zu einer Verbesserung der Wettbewerbsposition im Bereich der Kinderbetreuung führen und ist ein entscheidender Faktor für die Produktentwicklung. Insgesamt zeigt die Norm EN 1272:2017, dass sie sowohl umfassende Sicherheitsanforderungen als auch praktikable Testmethoden bietet. Ihre Relevanz im Bereich der Kinderbetreuung ist nicht zu unterschätzen, da sie viele Aspekte der Sicherheit und Qualität von Tisch stolen, die für Kinder vorgesehen sind, abdeckt und somit zur Sicherheit von Nutzern beiträgt.
La norme SIST EN 1272:2017 établit des exigences de sécurité et des méthodes d'essai pour les chaises montées sur table destinées aux enfants capables de s'asseoir sans aide et pesant jusqu'à 15 kg. Cette norme européenne se révèle cruciale dans le domaine des articles de puériculture, garantissant que ces produits sont conformes aux critères de sécurité rigoureux, ce qui est primordial pour la protection des jeunes utilisateurs. Parmi les points forts de la norme EN 1272:2017, on note son approche exhaustive qui couvre non seulement les exigences de conception, mais également les essais nécessaires pour vérifier la conformité des chaises montées sur table. Cela permet de s'assurer que les chaises peuvent supporter les conditions d'utilisation quotidiennes tout en restant stables et sécurisées pour les enfants. La pertinence de cette norme est particulièrement marquée dans un secteur où la sécurité des enfants est une priorité absolue. En spécifiant des tests standards pour évaluer la résistance, la durabilité et la sécurité des chaises, la norme contribuent à réduire les risques d'accidents domestiques et à renforcer la confiance des consommateurs dans les produits disponibles sur le marché. De plus, le fait que la norme cible des enfants jusqu'à un poids maximum de 15 kg en fait un outil vital pour les fabricants cherchant à développer des produits qui respectent les meilleures pratiques en matière de sécurité. En résumé, la norme EN 1272:2017 s'affirme comme un cadre essentiel pour assurer une conception et une fabrication sûres des chaises montées sur table, garantissant ainsi que les articles de puériculture répondent aux attentes les plus élevées de sécurité et de fonctionnalité.
SIST EN 1272:2017の標準は、子供用のテーブル取り付け椅子に関する安全要件と試験方法を規定しており、特に自力で座ることができる最大体重15kgまでの子供を対象としています。この標準は、家具業界における安全性の確保に直結する内容であり、親や保護者にとって信頼できる製品選定の指針となります。 標準の強みとしては、まず安全試験方法が明確に定義されている点が挙げられます。これにより、製品の設計段階から実際の使用に至るまで、継続的な品質管理が行いやすくなります。また、EN 1272:2017は、子供の安全性を最優先に考えており、危険を未然に防ぐための具体的な基準を提供しているため、業界全体の安全基準を引き上げる役割も果たしています。 さらに、この標準は、EU内での子供用家具の取引においても非常に重要な位置づけにあります。特に、EUの市場に進出する企業にとっては、SIST EN 1272:2017に準拠することが製品の信頼性を高めるだけでなく、販売促進にもつながります。子供の商品は特にリスクが高いため、厳しい安全基準をクリアすることが消費者の信頼を得る鍵となるでしょう。 このように、SIST EN 1272:2017は、子供用テーブル取り付け椅子の市場での安全性を飛躍的に向上させるだけでなく、消費者保護の側面からも極めて重要な標準と言えます。その適用により、企業はより安全な製品を提供し、同時に市場競争力を維持できるでしょう。
SIST EN 1272:2017 표준은 아동용 테이블 부착 의자에 대한 안전 요구 사항 및 시험 방법을 규정하고 있습니다. 이 표준은 15kg 이하의 체중을 가진 자율적으로 앉을 수 있는 아동을 대상으로 하여, 부모와 보호자가 안심하고 사용할 수 있는 제품을 제공하는 데 큰 중요성을 가지고 있습니다. 이 표준의 주요 강점은 명확하게 정의된 안전 요구 사항과 시험 방법을 포함한다는 점입니다. 이를 통해 제품 개발자와 제조업체는 아동의 안전을 최우선으로 고려한 제품을 설계할 수 있습니다. 또한, EN 1272:2017의 시험 방법은 객관적이고 신뢰성 있는 평가를 가능하게 하여 일관된 품질을 유지하도록 돕습니다. 이 표준은 아동의 발달 단계와 사용 시나리오를 고려하여 설계되었기 때문에, 실제 사용 환경에서 발생할 수 있는 다양한 상황에 대응할 수 있도록 하고 있습니다. 따라서, 소비자들이 더욱 안전하게 아동용 테이블 부착 의자를 이용할 수 있도록 보장하고 있으며, 이는 아동 보호와 관련된 중요한 이슈인 만큼 그 관련성이 높습니다. 결론적으로, SIST EN 1272:2017 표준은 아동용 테이블 부착 의자의 안전성과 품질을 보장하기 위한 필수 조건들을 잘 망라하고 있으며, 제조업체 및 소비자에게 필수적으로 참고해야 할 중요한 문서입니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...