iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 45510-4-4:2002

(Main)

Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment

Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment

This standard gives guidance on writing the technical specification for the procurement of fuel preparation plant for solid, liquid and gaseous fuels associated with steam generating plant and flue gas treatment plant in the electrical power supply industry. This includes: feeders; pulverizers/mills, crushers; classifiers, pipework; pumps; heaters; filters; dampers; valves.

Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 4-4: Nebenanlagen - Brennstoffaufbereitungsanlagen

Die vorliegende Beschaffungsrichtlinie gibt Hilfestellung bei der Erstellung dertechnischen Spezifikation für die Beschaffung von Brennstoffbehandlungsanlagen für feste, flüssige und gasförmige Brennstoffe im Zusammenhang mit Dampferzeugern und Rauchgasreinigungsanlagen in Kraftwerken. Eingeschlossen sind: Zuteiler; Mahlanlagen/Mühlen; Brecher; Sichter; Rohrleitungen; Pumpen; Vorwärmer; Filter; Klappen, Ventile.

Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 4-4: Auxiliaires de chaudière - Systèmes de préparation du combustible

La présente norme donne des indications pour la rédaction des spécifications techniques concernant l'acquisition de systèmes de préparation des combustibles solides, liquides et gazeux associées aux générateurs de vapeur et aux systèmes de traitement des fumées dans les centrales de production d'électricité. Il s'agit de: chargeurs; pulvérisateurs, broyeurs et concasseurs; sélecteurs; canalisations; pompes; réchauffeurs; filtres; registres; vannes.

Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment

General Information

Status
Published
Publication Date
13-Aug-2002
Withdrawal Date
27-Feb-2003
ICS
27.100 - Power stations in general
Technical Committee
CEN/CLC/JTC 2 - Power Engineering
Drafting Committee
CEN/CLC/JTC 2 - Power Engineering
Parallel Committee
CENCLC/TC 2 - CENCLC_TC_2
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Jun-2018
Completion Date
04-Jun-2018
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/92/10 - Mandate to CEN/CENELEC in the field of electricity generation for the drawing-up of European standards to be used as procurement guides in public contracts and for the preparation of a programme of supporting standards
Ref Project
SIST EN 45510-4-4:2003 - Guide for procurement of power station equipment -- Part 4-4: Boiler auxiliaries - Fuel preparation equipment

Buy Standard

EN 45510-4-4:2003EN 45510-4-4:2003
PreviousNext
Standard
EN 45510-4-4:2003
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipmentLeitfaden für Beschaffung von Ausrüstungen für Kraftwerke -- Teil 4-4: Nebenanlagen - BrennstoffaufbereitungsanlagenGuide pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 4-4: Auxiliaires de chaudière - Systèmes de préparation du combustibleGuide for procurement of power station equipment -- Part 4-4: Boiler auxiliaries - Fuel preparation equipment27.100Elektrarne na splošnoPower stations in general27.060.30Grelniki vode in prenosniki toploteBoilers and heat exchangersICS:Ta slovenski standard je istoveten z:EN 45510-4-4:2002SIST EN 45510-4-4:2003en01-februar-2003SIST EN 45510-4-4:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 45510-4-4August 2002ICS 27.040; 27.100English versionGuide for procurement of power station equipment - Part 4-4:Boiler auxiliaries - Fuel preparation equipmentGuide pour l'acquisition d'équipements destinés auxcentrales de production d'électricité - Partie 4-4: Auxiliairesde chaudière - Systèmes de préparation du combustibleLeitfaden für die Beschaffung von Ausrüstungen fürKraftwerke - Teil 4-4: Nebenanlagen -BrennstoffaufbereitungsanlagenThis European Standard was approved by CEN and CENELEC on 3 July 2001.CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givingthis European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerningsuch national standards may be obtained on application to the CEN Management Centre or to any CEN or CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN or CENELEC member into its own language and notified to the CEN Management Centre has the samestatus as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden,Switzerland and United Kingdom.CEN Management Centre:CENELEC Central Secretariat:rue de Stassart, 36
B-1050 Brusselsrue de Stassart, 35
B-1050 Brussels© 2002 CEN/CENELECAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members and for CENELECMembers.Ref. No. EN 45510-4-4:2002 ESIST EN 45510-4-4:2003
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 45510-2-9:2008(Main)
Guide for procurement of power station equipment - Part 2-9: Electrical equipment - Cabling systems
SIST EN 45510-2-9:2008

This standard gives guidance on writing the technical specification for the procurement of equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide on cabling systems deals with a wide range of activities and may be used for any or all of these activities by selection of the relevant parts e.g.: - provision of support for cable; - laying of cable; - completion of cable ends; The Guide covers the installation of power cable up to and including 20,8/36 (42) kV and the supply and installation of control and instrumentation cable. The supply of power cable is covered by EN 45510-2-8. The Guide includes the installation of protective conductor cable for earthing and equipotential bonding up to the main earthing busbar(s), but not the below ground earth-electrode network. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that - the equipment type and capacity interfaces correctly with other elements of the systems, - predicted performance is achieved, - ancillary equipment is properly sized, - reliability, availability and safety requirements are achieved, - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover - any commercial, contractual or legal issues which are normally in separate parts of an enquiry, - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-2-8:2004(Main)
Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables
SIST EN 45510-2-8:2004

This standard gives guidance on writing the technical specification for the procurement of low voltage (LV) and medium voltage (MV) power cables for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers power cables only for voltages up to and including Um = 41,5 kV. This Guide does not cover cables for public distribution systems, control and instrumentation systems or communications systems. For guidance on the technical specification of cables, including their installation and termination, refer to EN 45510-2-6 The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-2-7:2002(Main)
Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
SIST EN 45510-2-7:2003

This standard gives guidance on writing the technical specification for the procurement of switchgear and controlgear for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers switchgear and controlgear within installations primarily concerned with the generation of electrical power and, where appropriate, their interconnection with the transmission and/or distribution system. It also includes main connections (busbars) associated with generator circuits and the ancillary plant forming part of switchboards and/or switching circuits. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-2-5:2002(Main)
Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors
SIST EN 45510-2-5:2003

This standard gives guidance on writing the technical specification for the procurement of motors for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers motors within installations primarily concerned with the generation of electrical power. However, as a complete electrical drive system is not defined in this Guide, attention is drawn to the possible additional electrical and mechanical stresses to which the motor may be subjected e.g. by a static AC converter/inverter. Reference should be made to IEC 60034-17. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-4-5:2002(Main)
Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant
SIST EN 45510-4-5:2003

This standard gives guidance on writing the technical specification for the procurement of coal handling and bulk storage plant, associated with steam generating plant in the electrical power supply industry. This includes: wagon unloaders or wagon tipplers; barges or ship unloaders; coal stackers and coal reclaimers (bucket wheels, scrapers) of the coal yard; hoppers; silos for coal mixing, buffer silos, bunkers (boiler house silos); transfer towers between belt conveyors; belt conveyors, bucket elevators; metal structures (towers, conveyor tunnels)...

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-2-6:2000(Main)
Guide for procurement of power station equipment - Part 2-6: Electrical equipment - Generators
SIST EN 45510-2-6:2003

This standard gives guidance on writing the technical specification for the procurement of turbine-driven generators and their auxiliaries for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. The generators may be air, hydrogen, or liquid-cooled. The excitation system may be of the static or rotating rectifier type fed by a static or rotating power supply. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-2-3:2000(Main)
Guide for procurement of power station equipment - Part 2-4: Electrical equipment - Stationary batteries and chargers
SIST EN 45510-2-3:2002

This standard gives guidance on writing the technical specification for the procurement of stationary batteries and chargers for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers stationary lead-acid and nickel-cadmium batteries, chargers, battery accommodation battery main connections and battery accessories. This equipment usually forms part of either a centralised or unit d.c. supplies system for duties such as switchgear closing/tripping, protection, control, alarm, instrumentation and telecommunication supplies, emergency lighting and emergency drives. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-3-1:1999(Main)
Guide for procurement of power station equipment - Part 3-1: Boilers - Water tube boilers
SIST EN 45510-3-1:2000

This standard gives guidance on writing the technical specification for the procurement of water tube boilers for the use in electricity generating stations(power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of the nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers water tube boilers: - using solid, liquid or gaseous fuels and for heat recovery; - with pulverised fuel, stoker or cyclone firing, gas or oil firing;...

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-6-8:1999(Main)
Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes
SIST EN 45510-6-8:2000

This standard gives guidance on writing the technical specification for the procurement of any lifting equipment used in the electricity generating stations (power stations). This Guide for procurement is not applicable to equipment used in the nuclear reactor plant area of the nuclear power station. Other possibleapplications of such equipment have been considered in the preparation of this Guide. This Guide covers: - Travelling cranes; - Portal or semi-portal bridge cranes; - Fixed or articulated jigs; - Hoist monorails; - Mobile cranes.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-3-3:1999(Main)
Guide for procurement of power station equipment - Part 3-3: Boilers - Boilers with fluidized bed firing
SIST EN 45510-3-3:2000

This standard gives guidance on writing the technical specification for the procurement of boiler (with fluidized bed firing) for use in electricity generating stations (power stations). This Guide for Procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day