Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear

NEW!IEC 62442-2:2018 is available as IEC 62442-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62442-2:2018 defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding fluorescent lamps). A calculation method of the efficiency of controlgear for high intensity discharged lamp(s) is also defined. It is assumed that the controlgear are designed for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision and has been harmonized with IEC 62442-1 and IEC 62442-3.

Energieeffizienz von Lampenbetriebsgeräten - Teil 2: Betriebsgeräte für Hochdruck-Entladungslampen (ausgenommen Leuchtstofflampen) - Messverfahren zur Bestimmung des Wirkungsgrades von Betriebsgeräten

Performance énergétique des appareillages de lampes - Partie 2: Appareillages des lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence) - Méthode de mesure pour la détermination du rendement des appareillages

NEW!IEC 62442-2:2018 est disponible sous forme de IEC 62442-2:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62442-2:2018 définit une méthode de mesure des pertes de puissance de l’appareillage électromagnétique, de la puissance d’entrée totale et de la puissance de veille de l’appareillage électronique pour les lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence). Une méthode de calcul du rendement des appareillages de lampe(s) à décharge à haute intensité est également définie. On considère que les appareillages sont conçus pour des alimentations en courant continu jusqu’à 1 000 V et/ou des alimentations en courant alternatif de 1 000 V au maximum, à 50 Hz ou 60 Hz. Cette deuxième édition annule et remplace la première édition parue en 2014. Cette édition constitue une révision technique. Cette édition constitue une révision technique et elle a été harmonisée avec l’IEC 62442-1 et l’IEC 62442-3.

Energijske lastnosti krmilne naprave sijalke - 2. del: Krmilna naprava za visoko intenzivnostne razelektritvene sijalke (razen fluorescenčne sijalke) - Merilna metoda za ugotavljanje učinkovitosti krmilne naprave (IEC 62442-2:2018)

Ta del standarda EN IEC 62442 določa metodo merjenja izgub moči elektromagnetnih krmilnih naprav, skupne vhodne moči in moči elektronskih krmilnih naprav v stanju pripravljenosti za visokointenzivnostne razelektritvene sijalke (razen fluorescenčnih sijalk). Določena je tudi metoda za izračun učinkovitosti elektronskih krmilnih naprav za visokointenzivnostne razelektritvene sijalke.
Predpostavlja se, da je krmilna oprema zasnovana za uporabo pri enosmernem napajanju z napetostjo 1000 V in/ali izmeničnem napajanju z napetostjo do 1000 V pri 50 Hz ali 60 Hz.
Ta dokument se uporablja za krmilna vezja, ki so sestavljena izključno iz elektronskih krmilnih naprav in sijalk.
OPOMBA: Zahteve za preskušanje posameznih delov krmilne opreme med proizvodnjo niso vključene.
Ta dokument določa merilno metodo za skupno vhodno moč, moč v stanju pripravljenosti in metodo za izračun učinkovitosti krmilnih naprav za sijalke za vse krmilne naprave, ki se prodajajo za domačo uporabo in običajne komercialne namene ter delujejo z visokointenzivnostnimi razelektritvenimi sijalkami.
Ta dokument se ne uporablja za:
– krmilno opremo, ki je sestavni del sijalk;
– krmilna vezja z zaporedno vezanimi kondenzatorji;
– krmiljeno elektromagnetno krmilno opremo.

General Information

Status
Published
Publication Date
06-Sep-2018
Current Stage
6060 - Document made available
Due Date
07-Sep-2018
Completion Date
07-Sep-2018

RELATIONS

Buy Standard

Standard
EN IEC 62442-2:2018
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Amendment
EN 62442-2:2014/oprA1:2017
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 62442-2:2018
01-november-2018
1DGRPHãþD
SIST EN 62442-2:2014
SIST EN 62442-2:2014/A11:2018
(QHUJLMVNHODVWQRVWLNUPLOQHQDSUDYHVLMDONHGHO.UPLOQDQDSUDYD]DYLVRNR
LQWHQ]LYQRVWQHUD]HOHNWULWYHQHVLMDONH UD]HQIOXRUHVFHQþQHVLMDONH 0HULOQD
PHWRGD]DXJRWDYOMDQMHXþLQNRYLWRVWLNUPLOQHQDSUDYH ,(&

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge

lamps (excluding fluorescent lamps) - Method of measurement to determine the
efficiency of the controlgear (IEC 62442-2:2018)

Energieeffizienz von Lampenbetriebsgeräten - Teil 2: Betriebsgeräte für Hochdruck-

Entladungslampen (ausgenommen Leuchtstofflampen) - Messverfahren zur Bestimmung
des Wirkungsgrades von Betriebsgeräten (IEC 62442-2:2018)

Performance énergétique des appareillages de lampes - Partie 2: Appareillages des

lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence) -

Méthode de mesure pour la détermination du rendement des appareillages (IEC 62442-

2:2018)
Ta slovenski standard je istoveten z: EN IEC 62442-2:2018
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN IEC 62442-2:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62442-2:2018
---------------------- Page: 2 ----------------------
SIST EN IEC 62442-2:2018
EUROPEAN STANDARD EN IEC 62442-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 29.140.99
English Version
Energy performance of lamp controlgear - Part 2: Controlgear for
high intensity discharge lamps (excluding fluorescent lamps) -
Method of measurement to determine the efficiency of
controlgear
(IEC 62442-2:2018)

Performance énergétique des appareillages de lampes - Energieeffizienz von Lampenbetriebsgeräten - Teil 2:

Partie 2: Appareillages des lampes à décharge à haute Betriebsgeräte für Hochdruck-Entladungslampen

intensité (à l'exclusion des lampes à fluorescence) - (ausgenommen Leuchtstofflampen) - Messverfahren zur

Méthode de mesure pour la détermination du rendement Bestimmung des Wirkungsgrades von Betriebsgeräten

des appareillages (IEC 62442-2:2018)
(IEC 62442-2:2018)

This European Standard was approved by CENELEC on 2018-08-10. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 62442-2:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62442-2:2018
EN IEC 62442-2:2018 (E)
European foreword

The text of document 34C/1336A/CDV, future edition 2 of IEC 62442-2, prepared by SC 34C

"Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-

CENELEC parallel vote and approved by CENELEC as EN IEC 62442-2:2018.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2019-05-10

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2021-08-10

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 62442-2:2018 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60188 NOTE Harmonized as EN 60188.
IEC 60662 NOTE Harmonized as EN 60662.
IEC 60923 NOTE Harmonized as EN 60923.
IEC 61167 NOTE Harmonized as EN 61167.
IEC 62035 NOTE Harmonized as EN 62035.
IEC 62442-3 NOTE Harmonized as EN 62442-3.
---------------------- Page: 4 ----------------------
SIST EN IEC 62442-2:2018
EN IEC 62442-2:2018 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61347-1 2015 Lamp controlgear - Part 1: General and EN 61347-1 2015
safety requirements
IEC 61347-2-9 - Lamp controlgear -- Part 2-9: Particular EN 61347-2-9 -
requirements for electromagnetic
controlgear for discharge lamps (excluding
fluorescent lamps)
IEC 61347-2-12 - Lamp controlgear - Part 2-12: Particular - -
requirements for d.c. or a.c. supplied
electronic ballasts for discharge lamps
(excluding fluorescent lamps)
IEC Guide 115 2007 Application of uncertainty of measurement - -
to conformity assessment activities in the
electrotechnical sector
---------------------- Page: 5 ----------------------
SIST EN IEC 62442-2:2018
---------------------- Page: 6 ----------------------
SIST EN IEC 62442-2:2018
IEC 62442-2
Edition 2.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Energy performance of lamp controlgear –
Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent
lamps) – Method of measurement to determine the efficiency of controlgear
Performance énergétique des appareillages de lampes –
Partie 2: Appareillages des lampes à décharge à haute intensité (à l’exclusion
des lampes à fluorescence) – Méthode de mesure pour la détermination du
rendement des appareillages
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-5642-8

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 62442-2:2018
– 2 – IEC 62442-2:2018 © IEC 2018
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 6

4 General ........................................................................................................................... 7

4.1 Applicability ............................................................................................................ 7

4.2 General notes on tests ............................................................................................ 7

4.3 Controllable controlgear .......................................................................................... 8

4.4 Multi-lamp type controlgear ..................................................................................... 8

4.5 Measurement uncertainty ........................................................................................ 8

4.6 Sampling of controlgear for testing .......................................................................... 8

4.7 Size of the test sample............................................................................................ 8

4.8 Power supply .......................................................................................................... 8

4.9 Supply voltage waveform ........................................................................................ 9

4.10 Instrument accuracy ................................................................................................ 9

4.11 Multi-rated voltage controlgear ................................................................................ 9

4.12 Sensor and network connections ............................................................................. 9

5 Method of measurement of the input power and calculation of the efficiency of

controlgear for high intensity discharge lamps ............................................................... 10

5.1 Measurement setup: electromagnetic controlgear ................................................. 10

5.2 Efficiency calculation: electromagnetic controlgear ............................................... 10

5.3 Measurement setup: electronic controlgear ........................................................... 11

5.4 Efficiency calculation: electronic controlgear ......................................................... 12

5.5 Standby power measurement of electronic controlgear ......................................... 12

Bibliography .......................................................................................................................... 13

Figure 1 – Measurement setup for electromagnetic controlgear ............................................ 10

Figure 2 – Measurement setup for electronic controlgear ...................................................... 11

Figure 3 – Measurement setup of the standby power of electronic controlgear ...................... 12

Table 1 – Typical nominal electricity supply details for some regions ...................................... 8

---------------------- Page: 8 ----------------------
SIST EN IEC 62442-2:2018
IEC 62442-2:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENERGY PERFORMANCE OF LAMP CONTROLGEAR –
Part 2: Controlgear for high intensity discharge lamps
(excluding fluorescent lamps) – Method of measurement
to determine the efficiency of controlgear
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62442-2 has been prepared by subcommittee 34C: Auxiliaries for

lamps, of IEC technical committee 34: Lamps and related equipment.

This second edition cancels and replaces the first edition published in 2014. This edition

constitutes a technical revision and has been harmonized with IEC 62442-1 and IEC 62442-3.

The text of this International Standard is based on the following documents:
CDV Report on voting
34C/1336A/CDV 34C/1377/RVC

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.
---------------------- Page: 9 ----------------------
SIST EN IEC 62442-2:2018
– 4 – IEC 62442-2:2018 © IEC 2018

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts in the IEC 62442 series, published under the general title Energy

performance of lamp controlgear, can be found on the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN IEC 62442-2:2018
IEC 62442-2:2018 © IEC 2018 – 5 –
ENERGY PERFORMANCE OF LAMP CONTROLGEAR –
Part 2: Controlgear for high intensity discharge lamps
(excluding fluorescent lamps) – Method of measurement
to determine the efficiency of controlgear
1 Scope

This part of IEC 62442 defines a measurement method of the power losses of electromagnetic

controlgear, the total input power and the standby power of electronic controlgear for high

intensity discharged lamps (excluding fluorescent lamps). A calculation method of the

efficiency of controlgear for high intensity discharged lamp(s) is also defined.

It is assumed that the controlgear are designed for use on DC supplies up to 1 000 V and/or

AC supplies up to 1 000 V at 50 Hz or 60 Hz.

This document applies to electrical controlgear-lamp circuits comprised solely of the

controlgear and of the lamp(s).
NOTE Requirements for testing i
...

SLOVENSKI STANDARD
SIST EN 62442-2:2014/oprA1:2017
01-september-2017
(QHUJLMVNHODVWQRVWLNUPLOQHQDSUDYHVLMDONHGHO.UPLOQDQDSUDYD]DYLVRNR
LQWHQ]LYQRVWQHUD]HOHNWULWYHQHVLMDONH UD]HQIOXRUHVFHQþQHVLMDONH 0HULOQD
PHWRGD]DXJRWDYOMDQMHXþLQNRYLWRVWLNUPLOQHQDSUDYH

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge

lamps (excluding fluorescent lamps) - Method of measurement to determine the
efficiency of the controlgear

Energieeffizienz von Lampenbetriebsgeräten - Teil 2: Betriebsgeräte für Hochdruck-

Entladungslampen (ausgenommen Leuchtstofflampen) - Messverfahren zur Bestimmung
des Wirkungsgrades von Betriebsgeräten

Performance énergétique des appareillages de lampes - Partie 2: Appareillages des

lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence) -
Méthode de mesure pour la détermination du rendement des appareillages
Ta slovenski standard je istoveten z: EN 62442-2:2014/prA1:2017
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 62442-2:2014/oprA1:2017 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62442-2:2014/oprA1:2017
---------------------- Page: 2 ----------------------
SIST EN 62442-2:2014/oprA1:2017
34C/1336A/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62442-2/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2017-06-09 (2017-06-02) 2017-08-25
SUPERSEDES DOCUMENTS:
34C/1280/CD,34C/1330/CC
IEC SC 34C : AUXILIARIES FOR LAMPS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of

which they are aware and to provide supporting documentation.
TITLE:

Amendment 1 - Energy performance of lamp controlgear - Part 2: Controlgear for high intensity

discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the

efficiency of the controlgear
NOTE FROM TC/SC OFFICERS:

This ‘A’ version is circulated due to missing line numbering in the French version. The English version

remains unchanged.
The closing date remains unchanged.

Copyright © 2017 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to

download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National

Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for

any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 62442-2:2014/oprA1:2017
62442-2/Ed1/A1/CDV © IEC (E) 2 34C/1336A/CDV
1 ENERGY PERFORMANCE OF LAMP CONTROLGEAR –
3 Part 2: Controlgear for high intensity discharge lamps
4 (excluding fluorescent lamps) – Method of measurement
5 to determine the efficiency of the controlgear
8 1 Scope

9 This part of the IEC 62442 series defines a measurement method of the power losses of

10 electromagnetic controlgear, the total input power and the standby power of electronic

11 controlgear for high intensity discharged lamps (excluding fluorescent lamps). Also a

12 calculation method of the efficiency for controlgear for high intensity discharged lamp(s) is

13 defined.

14 It is assumed that the controlgear are designed for the use on DC supplies up to 1 000 V

15 and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz.

16 This document applies to electrical controlgear – lamp circuits comprised solely of the

17 controlgear and of the lamp(s).

18 NOTE Requirements for testing individual controlgear during production are not included.

19 It specifies the measurement method for the total input power, the standby power and the

20 calculation method of the lamp controlgear efficiency for all controlgear sold for domestic and

21 normal commercial purposes operating with high intensity discharge lamps.
22 This International Standard does not apply to:
23 – controlgear which form an integral part of lamps;
24 – controlgear circuits with capacitors connected in series;
25 – controllable electromagnetic controlgear.
26 2 Normative references

27 The following documents are referred to in the text in such a way that some or all of their

28 content constitutes requirements of this document. For dated references, only the edit ion cited

29 applies. For undated references, the latest edition of the referenced document (including any

30 amendments) applies.
31 IEC 61347-1:2015, Lamp controlgear – Part 1: General and safety requirements

32 IEC 61347-2-9:2012, Lamp controlgear – Part 2-9: Particular requirements for electromagnetic

33 controlgear for discharge lamps (excluding fluorescent lamps)

34 IEC 61347-2-12:2005, Lamp controlgear – Part 2-12: Particular requirements for d.c. or a.c.

35 supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)

36 IEC 61347-2-12/AMD1:2010

37 ISO/IEC GUIDE 98-3:2008, Uncertainty of measurement – Part 3: Guide to the expression of

38 uncertainty in measurement (GUM:1995)

39 IEC Guide 115:2007, Application of uncertainty of measurement to conformity assessment

40 activities in the electrotechnical sector
---------------------- Page: 4 ----------------------
SIST EN 62442-2:2014/oprA1:2017
62442-2/Ed1/A1/CDV © IEC (E) 3 34C/1336A/CDV
41 3 Terms and definitions
42 For the purpose of this document, the following terms and definitions apply.
43 3.1
44 nominal value

45 suitable approximate quantity value used to designate or identify a component, device or

46 equipment
47 [SOURCE: IEC 62442-1, 3.1]
48 3.2
49 rated value

50 quantity value for specified operating conditions of a component, device or equipment.

51 [SOURCE: IEC 62442-1, 3.3, modified – The note has been removed.]

52 Note to entry: The value and conditions are specified in the relevant standard or assigned by the manufacturer

53 or responsible vendor
54 3.3
55 controlgear

56 one or more components between supply and one or more lamps which may serve to transform

57 the supply voltage, limit the current of lamp(s) to the required value, provide star ting voltage,

58 correct power factor or reduce radio interference
59 [SOURCE: IEC 62442-1, 3.4]
60 3.4
61 electromagnetic or magnetic controlgear

62 controlgear which by means of inductance, or a combination of inductance and capacitance,

63 serves mainly to limit the current of lamp(s) to the required value
64 Frequency of the lamp controlgear is the same as supply frequency
65 [SOURCE: IEC 62442-1, 3.5]
66 3.5
67 electronic controlgear,

68 A.C. and/or D.C. supplied electronic circuit including stabilizing elements for starting and

69 operating one or more lamp(s)
70 3.6
71 discharge lamp

72 lamp in which the light is produced, directly or indirectly, by an electric discharge through a gas,

73 a metal vapour or a mixture of several gases and vapours
74 3.7
75 controlgear – lamp circuit

76 electrical circuit, or part thereof, normally built in a luminaire, consisting of the controlgear and

77 lamp(s)
78 [SOURCE: IEC 62442-1, 3.8]
79 3.8
80 standby mode

81 mode of the controlgear, in which the light source is switched off by a control signal, while the

82 controlgear remains connected to the mains supply
---------------------- Page: 5 ----------------------
SIST EN 62442-2:2014/oprA1:2017
62442-2/Ed1/A1/CDV © IEC (E) 4 34C/1336A/CDV
83 3.9
84 standby power
85 average power consumption of a controlgear in the standby mode

86 Note 1 to entry: Power supplied by controlgear to sensors, network connections and other auxiliaries is not

87 include in the standby power.
88 Note 2 to entry: Unit: W.
89 3.10
90 total input power

91 total power supplied to the controlgear – light source circuit measured at rated input voltage

92 [SOURCE: IEC 62442-1, 3.13, modified – The sentence "The rated power specified is related

93 to a specific ballast lumen factor (BLF)." has been removed.]
94 3.11
95 efficiency of lamp controlgear,
96 η
MCG
97 η
ECG
98 ratio of the output power to lamp(s) and input power of the controlgear

99 Note 1 to entry: Detailed measurement method and conditions are given in clause 5.

100 Note 2 to entry: Loads from sensors, network connections or other auxiliaries are disconnected or if not possible

101 otherwise eliminated from the result.
102 3.12
103 multi-lamp type controlgear

104 controlgear designed for the operation of more than one type of lamp with different electrical

105 characteristics e.g. power
106 4 General
107 4.1 Applicability

108 The measurement and calculation methods of this International Standard shall only be used for

109 lamp controlgear which conforms to IEC 61347-2-9:2012 or IEC 61347-2-12:2005.

110 4.2 General notes on test

111 The measurement conditions are specified in IEC 61347-1:2015, Clauses H.1, H.2, H.4, H.8,

112 H.9 and H.11 shall be applied; unless otherwise specified in this standard. The device under

113 test (DUT) shall be placed according to IEC 61347-1:2015, Figure H.1.

114 An AC or DC voltage source shall be used to provide input voltage to the DUT. During the

115 tests, the supply voltage and the frequency shall be maintained constant within  0,5 % during

116 the warm-up period. However, during the actual measurement, the voltage shall be adjusted to

117 within  0,2 % of the specified testing value.
118 4.3 Controllable controlgear

119 In case of controllable controlgear the test shall be carried out with the maximum output power.

120 Requirements for other than 100 % light output operation of controllable controlgear and multi-

121 tapped electromagnetic controlgear are under consideration.
122 4.4 Multi-lamp type controlgear

123 If a single-lamp controlgear is designed for different lamp powers then the test shall be carried

124 out for each lamp.

125 The test for multi-lamp controlgear shall be carried out with all possible combinations.

---------------------- Page: 6 ----------------------
SIST EN 62442-2:2014/oprA1:2017
62442-2/Ed1/A1/CDV © IEC (E) 5 34C/1336A/CDV
126 4.5 Measurement uncertainty

127 Measurement uncertainty shall be managed in accordance with the accuracy method in 4.4.3 of

128 the IEC Guide 115:2007.
129 4.6 Sampling of controlgear for testing

130 The requirements and tolerances specified in this International Standard are based on the

131 testing of a type test sample submitted by the manu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.