EN 61975:2010/A1:2017

High-voltage direct current (HVDC) installations - System tests

IEC 61975:2010(E) applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests specified in this standard are based on bidirectional and bipolar high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The test requirements and acceptance criteria should be agreed for back-to-back installations, while multi-terminal systems and voltage sourced converters are not included in this standard. For monopolar HVDC installations, the standard applies except for bipolar tests. This standard only serves as a guideline to system tests for high-voltage direct current (HVDC) installations. The standard gives potential users guidance, regarding how to plan commissioning activities. The tests described in the guide may not be applicable to all projects, but represent a range of possible tests which should be considered. This edition cancels and replaces IEC/PAS 61975 published jointly in 2004 by IEC and CIGRÉ. It constitutes a technical revision incorporating engineering experience.

Anlagen zur Hochspannungsgleichstromübertragung (HGÜ) - Systemprüfungen

Installations en courant continu à haute tension (CCHT) - Essais systèmes

Visokonapetostne enosmerne inštalacije (HVDC) - Sistemski preskusi (IEC 61975:2010/A1:2016) - Dopolnilo A1

General Information

• Status: Published
• Publication Date: 09-Feb-2017
• ICS: 29.130.10 - High voltage switchgear and controlgear
• ICS: 31.080.01 - Semiconductor devices in general
• Technical Committee: CLC/TC 22X - Power electronics
• Drafting Committee: IEC/SC 22F - IEC_SC_22F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Feb-2017
• Completion Date: 10-Feb-2017
• Ref Project: SIST EN 61975:2010/A1:2017 - High-voltage direct current (HVDC) installations - System tests (IEC 61975:2010/A1:2016)

Relations

• Amends: EN 61975:2010 - High-voltage direct current (HVDC) installations - System tests
• Effective Date: 24-Mar-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61975:2010/A1:2017
01-april-2017
Visokonapetostne enosmerne inštalacije (HVDC) - Sistemski preskusi (IEC
61975:2010/A1:2016) - Dopolnilo A1
High-voltage direct current (HVDC) installations - System tests (IEC
61975:2010/A1:2016)
Ta slovenski standard je istoveten z: EN 61975:2010/A1:2017
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
SIST EN 61975:2010/A1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61975:2010/A1:2017

---------------------- Page: 2 ----------------------

SIST EN 61975:2010/A1:2017


EUROPEAN STANDARD EN 61975:2010/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2017
ICS 29.130.10; 31.080.01

English Version
High-voltage direct current (HVDC) installations - System tests
(IEC 61975:2010/A1:2016)
Installations en courant continu à haute tension (CCHT) - Anlagen zur Hochspannungsgleichstromübertragung (HGÜ)
Essais systèmes - Systemprüfungen
(IEC 61975:2010/A1:2016) (IEC 61975:2010/A1:2016)
This amendment A1 modifies the European Standard EN 61975:2010; it was approved by CENELEC on 2016-10-17. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61975:2010/A1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61975:2010/A1:2017
EN 61975:2010/A1:2017
European foreword
The text of document 22F/375/CDV, future IEC 61975:2010/A1, prepared by SC 22F “Power
electronics for electrical transmission and distribution systems” of IEC/TC 22 “Power electronic
systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61975:2010/A1:2017.

The following dates are fixed:
• latest date by which the document has to be (dop) 2017-08-10
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-02-10
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61975:2010/A1:2016 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 61975:2010/A1:2017



IEC 61975

®


Edition 1.0 2016-09




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




AM ENDMENT 1

AM ENDEMENT 1





High-voltage direct current (HVDC) installations – System tests



Installations en courant continu à haute tension (CCHT) – Essais systèmes



















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.130.10; 31.080.01 ISBN 978-2-8322-3610-9



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 61975:2010/A1:2017
– 2 – IEC 61975:2010/AMD1:2016
© IEC 2016

FOREWORD
This amendme
...