EN IEC 61853-3:2018

Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules

IEC 61853-3:2018 describes the calculation of PV module energy rating values. The purpose of this document is to define a methodology to determine the PV module energy output (watt-hours), and the climatic specific energy rating (dimensionless) for a complete year at maximum power operation for the reference climatic profile(s) given in IEC 61853-4. It is applied to determine a specific module output in a standard reference climatic profile for the purposes of comparison of rated modules.

Prüfung des Leistungsverhaltens von photovoltaischen (PV)-Modulen und Energiebemessung - Teil 3: Energiebemessung von PV-Modulen

Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 3: Caractéristiques assignées d’énergie des modules PV

L’IEC 61853-3:2018 décrit le calcul des valeurs des caractéristiques assignées d’énergie des modules PV. Le présent document a pour objet de définir une méthodologie qui permet de déterminer l’énergie produite par les modules PV (watts-heures) et les caractéristiques assignées d’énergie massique pour un profil climatique (adimensionnelles) pour une année complète à la puissance maximale de fonctionnement pour le ou les profils climatiques de référence indiqués dans l’IEC 61853-4. Le présent document est appliqué afin de déterminer une puissance de sortie de module spécifique selon un profil climatique de référence normalisé afin de comparer des modules assignés.

Preskušanje zmogljivosti in energijske učinkovitosti fotonapetostnega (PV) modula - 3. del: Energijska učinkovitost fotonapetostnega (PV) modula

Ta del standarda IEC 61853 opisuje izračun vrednosti energijske učinkovitosti fotonapetostnega (PV) modula. IEC 61853-1 opisuje zahteve za vrednotenje zmogljivosti fotonapetostnega modula pri različnih temperaturah in sevanjih v vrednostih za moč (W). IEC 61853-2 opisuje preskusne postopke za določanje temperature modula pri sevanju, temperaturi okolice in hitrosti vetra, metodo za merjenje učinkov vpadnega kota ter spektralni odziv.
IEC 61853-4 opisuje standardne referenčne podnebne profile (nabore standardnih okoljskih podatkov), ki se uporabljajo za izračun vrednosti energijske učinkovitosti.
Namen tega dokumenta je opredeliti metodologijo za določitev izhodne moči fotonapetostnega modula (Wh) in energijsko učinkovitost pri posameznih podnebnih razmerah (brez dimenzij) za celotno leto pri največji moči delovanja za referenčne podnebne profile, podane v standardu IEC 61853-4. Uporablja se za določitev izhodne moči specifičnega modula v standardnem referenčnem podnebnem profilu za namene primerjave ocenjenih modulov.
Metodologija ne upošteva progresivne degradacije ali prehodnega vedenja, kot so spremembe, ki jih povzroči svetloba, in/ali toplotno žarjenje. Ta dokument se uporablja za enostranske module.

General Information

• Status: Published
• Publication Date: 25-Oct-2018
• Withdrawal Date: 03-Oct-2021
• ICS: 27.160 - Solar energy engineering
• Technical Committee: CLC/TC 82 - Solar photovoltaic energy systems
• Drafting Committee: IEC/TC 82 - IEC_TC_82
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 26-Oct-2018
• Completion Date: 26-Oct-2018
• Ref Project: SIST EN IEC 61853-3:2018 - Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61853-3:2018
01-december-2018
3UHVNXãDQMH]PRJOMLYRVWLLQHQHUJLMVNHXþLQNRYLWRVWLIRWRQDSHWRVWQHJD39
PRGXODGHO(QHUJLMVNDXþLQNRYLWRVWIRWRQDSHWRVWQHJD39PRGXOD
Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating
of PV modules
Prüfung des Leistungsverhaltens von photovoltaischen (PV)-Modulen und
Energiebemessung - Teil 3: Energiebemessung von PV-Modulen
Essais de performance et caractéristiques assignées d'énergie des modules
photovoltaïques (PV) - Partie 3: Caractéristiques assignées d’énergie des modules PV
Ta slovenski standard je istoveten z: EN IEC 61853-3:2018
ICS:
27.015 (QHUJLMVNDXþLQNRYLWRVW Energy efficiency. Energy
2KUDQMDQMHHQHUJLMHQD conservation in general
VSORãQR
27.160 6RQþQDHQHUJLMD Solar energy engineering
SIST EN IEC 61853-3:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 61853-3:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 61853-3:2018


EUROPEAN STANDARD EN IEC 61853-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2018
ICS 27.160

English Version
Photovoltaic (PV) module performance testing and energy rating
- Part 3: Energy rating of PV modules
(IEC 61853-3:2018)
Essais de performance et caractéristiques assignées Prüfung des Leistungsverhaltens von photovoltaischen
d'énergie des modules photovoltaïques (PV) - Partie 3: (PV)-Modulen und Energiebemessung - Teil 3:
Caractéristiques assignées d'énergie des modules PV Energiebemessung von PV-Modulen
(IEC 61853-3:2018) (IEC 61853-3:2018)
This European Standard was approved by CENELEC on 2018-10-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61853-3:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 61853-3:2018
EN IEC 61853-3:2018 (E)
European foreword
The text of document 82/1441/FDIS, future edition 1 of IEC 61853-3, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61853-3:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-07-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-10-04
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61853-3:2018 was approved by CENELEC as a European
Standard without any modification.

2

---------------------- Page: 4 ----------------------

SIST EN IEC 61853-3:2018
EN IEC 61853-3:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to
...