Sectional Specification: Fixed low power film resistors

This sectional specification prescribes the preferred values for characteristics and ratings and also the inspection requirements for fixed film resistors of assessed quality. These resistors generally have wire terminations and are primarily intended to be mounted directly on to printed boards. It selects from the generic specification, EN 60115-1, the appropriate methods of test to be used in detail specifications derived from this specification. Associated with this specification are one or more blank detail specifications each referenced by an EN number. A blank detail specification which has been completed as specified in 1.2 of this specification forms a detail specification. Such detail specifications may be used for the grant of Qualification approval and for the performance of Quality conformance inspection in accordance with an established quality assessment system (e.g. the IECQ-CECC system).

Rahmenspezifikation: Schicht-Festwiderstände niedriger Belastbarkeit

Diese Rahmenspezifikation legt die bevorzugten Werte der Eigenschaften und Bemessungswerte sowie die Kontrollanforderungen für Schichtwiderstände niedriger Belastbarkeit mit bewerteter Qualität fest. Diese Widerstände haben im allgemeinen Drahtanschlüsse und sind in erster Linie für die direkte Montage auf Leiterplatten vorgesehen. Sie wählt aus der Fachgrundspezifikation EN 60115-1 diejenigen Prüfmethoden aus, die in der von dieser Spezifikation abgeleiteten Bauartspezifikation anzuwenden sind. Zu dieser Spezifikation gehören ein oder mehrere Vordrucke für Bauartspezifikationen, auf die jeweils durch die EN-Nummer Bezug genommen werden kann. Ein Vordruck für Bauartspezifikationen, der nach 1.2 dieser Rahmenspezifikation vervollständigt ist, stellt eine Bauartspezifikation dar. Diese Bauartspezifikationen dürfen nach einem festgelegten Qualitätsbewertungssystem (z. B. IECQ-CECC-System) für die Bauart-anerkennung und für die Durchführung der Qualitäts-Konformitätsprüfungen verwendet werden.

Spécification intermédiaire: Résistances couche fixes à faible dissipation

Cette spécification intermédiaire détermine les valeurs préférées des caractéristiques et des caractéristiques assignées, ainsi que les exigences d'inspection pour les résistances fixes à couche sous assurance de la qualité. Ces résistances ont généralement des sorties câblées et sont principalement destinées à être montées directement sur des cartes imprimées. Les méthodes d’essai appropriées à utiliser dans les spécifications particulières dérivées de cette spécification sont sélectionnées dans la spécification générique EN 60115-1. Une ou plusieurs spécifications particulières cadres, chacune référencée par un numéro EN, sont associées à cette spécification. Une spécification particulière cadre établie comme cela est spécifié en 1.2 de cette spécification constitue une spécification particulière. De telles spécifications particulières peuvent être utilisées pour accorder l’homologation et pour effectuer le contrôle de conformité de la qualité conformément à un système d'assurance qualité établi (par exemple, le système IECQ-CECC).

Področna specifikacija: Fiksni plastni (folijski) upori majhnih moči

General Information

Status
Withdrawn
Publication Date
14-Feb-2008
Withdrawal Date
30-Sep-2010
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Dec-2017
Completion Date
15-Dec-2017

Relations

Buy Standard

Standard
EN 140100:2008
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sectional Specification: Fixed low power film resistorsRþLSpécification intermédiaire: Résistances couche fixes à faible dissipationRahmenspezifikation: Schicht-Festwiderstände niedriger BelastbarkeitTa slovenski standard je istoveten z:EN 140100:2008SIST EN 140100:2008en,fr,de31.040.10ICS:SIST EN 140100:2002/A1:2002SIST EN 140100:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 140100:200801-april-2008







EUROPEAN STANDARD EN 140100 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 140100:2008 E
ICS 31.040.10 Supersedes EN 140100:1996 + A1:2001
English version
Sectional Specification:
Fixed low power film resistors
Spécification intermédiaire:
Résistances couche fixes
à faible dissipation
Rahmenspezifikation:
Schicht-Festwiderstände
niedriger Belastbarkeit
This European Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 140100:2008 – 2 – Foreword This European Standard was prepared by the Technical Committee CENELEC TC 40XB, Resistors. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 140100 on 2007-10-01. This European Standard supersedes EN 140100:1996 + A1:2001. Compared to the superseded standard, the following changes have been implemented: – modification of the title; – introduction of a test on the resistance to electrostatic discharge;
– introduction of description and test methods for lead-free soldering;
– introduction of the code letters for temperature coefficient as given in EN 60062; – adoption of the IECQ rules of procedure, QC 001002-3; – editorial revision. The preceding document on the subject covered by this specification has been CECC 40 100:1980. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-10-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2010-10-01 __________



– 3 – EN 140100:2008
Table of contents
1 General.4 1.1 Scope.4 1.2 Information to be specified in the detail specification.4 2 Preferred characteristics, ratings and severities for environmental
and overload tests.5 2.1 Preferred characteristics.5 2.1.1 Style and dimensions.5 2.1.2 Preferred climatic categories.6 2.1.3 Temperature coefficients of resistance.6 2.1.4 Limits of change of resistance.7 2.2 Preferred values of ratings.9 2.2.1 Rated resistance.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.