EN 60464-2:2001
(Main)Varnishes used for electrical insulation - Part 2: Methods of test
Varnishes used for electrical insulation - Part 2: Methods of test
Specifies methods of test to be used for testing varnishes used for electrical insulation. This includes methods of test to be applied before and others to be applied after drying and/or curing of the varnish.
Elektroisolierlacke - Teil 2: Prüfverfahren
Vernis utilisés pour l'isolation électrique - Partie 2: Méthodes d'essai
Spécifie les méthodes d'essai à utiliser pour essayer les vernis utilisés pour l'isolation électrique. Ces méthodes comprennent des essais à appliquer avant séchage et/ou durcissement du vernis, et d'autres après.
Varnishes used for electrical insulation - Part 2: Methods of test (IEC 60464-2:2001)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60464-2:2002
prva izdaja
STANDARD
oktober 2002
Varnishes used for electrical insulation - Part 2: Methods of test (IEC 60464-2:2001)
ICS 29.035.60 Referenčna številka
SIST EN 60464-2:2002(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60464-2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2001
ICS 17.220.99;29.035.01
English version
Varnishes used for electrical insulation
Part 2: Methods of test
(IEC 60464-2:2001)
Vernis utilisés pour l'isolation électrique Elektroisolierlacke
Partie 2: Méthodes d'essai Teil 2: Prüfverfahren
(CEI 60464-2:2001) (IEC 60464-2:2001)
This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60464-2:2001 E
---------------------- Page: 2 ----------------------
EN 60464-2:2001 - 2 -
Foreword
The text of document 15C/1224/FDIS, future edition 2 of IEC 60464-2, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60464-2 on 2001-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-10-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60464-2:2001 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60464-2:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-212 1990 International Electrotechnical --
Vocabulary (IEV)
Chapter 212: Insulating solids, liquids
and gases
IEC 60068-2-10 1988 Basic environmental testing procedures HD 323.2.10 S3 1988
Part 2: Tests - Test J and guidance:
Mould growth
IEC 60093 1980 Methods of test for volume resistivity HD 429 S1 1983
and surface resistivity of solid electrical
insulating materials
IEC 60216 Series Electrical insulating materials - EN 60216 Series
Properties of thermal endurance
IEC 60243-1 1998 Electrical strength of insulating EN 60243-1 1998
materials - Test methods
Part 1: Tests at power frequencies
IEC 60250 1969 Recommended methods for the --
determination of the permittivity and
dielectric dissipation factor of electrical
insulating materials at power, audio and
radio frequencies including metre
wavelengths
IEC 60296 1982 Specification for unused mineral --
insulating oils for transformers and
switchgear
IEC 60464 Series Varnishes used for electrical insulation EN 60464 Series
IEC 60641-3-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.