Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials

IEC 60076-14:2013 applies to liquid-immersed power transformers employing either high-temperature insulation or combinations of high-temperature and conventional insulation, operating at temperatures above conventional limits. It is applicable to: - power transformers in accordance with IEC 60076-1; - convertor transformers according to IEC 61378 series; - transformers for wind turbine applications in accordance with IEC 60076-16; - arc furnace transformers; - reactors in accordance with IEC 60076-6. This part of IEC 60076 may be applicable as a reference for the use of high-temperature insulation materials in other types of transformers and reactors. This first edition of IEC 60076-14 cancels and replaces the second edition of the Technical Specification IEC/TS 60076-14 published in 2009. It constitutes a technical revision.

Leistungstransformatoren - Teil 14: Flüssigkeitsgefüllte Leistungstransformatoren mit Hochtemperatur-Isolierstoffen

Transformateurs de puissance - Partie 14: Transformateurs de puissance immergés dans du liquide utilisant des matériaux d'isolation haute température

La CEI 60076-14:2013 s'applique aux transformateurs immergés dans un liquide qui utilisent soit des isolants haute température soit des combinaisons d'isolants conventionnels et haute température, fonctionnant à des températures au-dessus des limites conventionnelles. Elle s'applique aux: - transformateurs de puissance conformes à la norme CEI 60076-1; - transformateurs de convertisseur conformes à la série CEI 61378; - transformateurs pour applications éoliennes conformes à la norme CEI 60076-16; - transformateurs de four à arc; - bobines d'inductance conformes à la norme CEI 60076-6. La présente partie de la norme CEI 60076 peut s'appliquer comme référence pour l'utilisation de matériaux isolants haute température dans d'autres types de transformateurs et bobines d'inductance. Cette première édition de la CEI 60076-14 annule et remplace la deuxième édition de la Spécification technique CEI/TS 60076-14 publiée en 2009. Elle constitue une révision technique.

Močnostni transformatorji - 14. del: V tekočino potopljeni močnostni transformatorji z vgrajenimi visokotemperaturnimi izolacijskimi materiali

Ta del standarda IEC 60076 se uporablja za v tekočino potopljene močnostne transformatorje z vgrajeno visokotemperaturno izolacijo ali kombinacijami visokotemperaturne izolacije in konvencionalne izolacije, ki delujejo pri temperaturah, ki presegajo običajne mejne vrednosti. Velja za: – močnostne transformatorje v skladu s standardom IEC 60076-1; – konvertorske transformatorje v skladu s skupino standardov IEC 61378; – transformatorje za uporabo z vetrnimi turbinami v skladu s standardom IEC 60076-16; – transformatorje obločnih peči; – reaktorje v skladu s standardom IEC 60076-6. Ta del standarda IEC 60076 se lahko uporablja kot referenčno besedilo za uporabo visokotemperaturnih izolacijskih materialov v drugih vrstah transformatorjev in reaktorjev.

General Information

Publication Date
Withdrawal Date
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
Completion Date

Buy Standard

EN 60076-14:2014
English language
61 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

SIST EN 60076-14:2014
Power transformers - Part 14: Liquid-immersed power transformers using high-
temperature insulation materials
Transformateurs de puissance - Partie 14: Transformateurs de puissance immergés
dans du liquide utilisant des matériaux d'isolation haute température
Ta slovenski standard je istoveten z: EN 60076-14:2013
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 60076-14:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60076-14:2014

---------------------- Page: 2 ----------------------

SIST EN 60076-14:2014

EN 60076-14

October 2013

ICS 29.180

English version

Power transformers -
Part 14: Liquid-immersed power transformers
using high-temperature insulation materials
(IEC 60076-14:2013)

Transformateurs de puissance -  Leistungstransformatoren -
Partie 14: Transformateurs de puissance Teil 14: Flüssigkeitsgefüllte
immergés dans du liquide utilisant des Leistungstransformatoren mit
matériaux d'isolation haute température Hochtemperatur-Isolierstoffen
(CEI 60076-14:2013) (IEC 60076-14:2013)

This European Standard was approved by CENELEC on 2013-10-21. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60076-14:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60076-14:2014
EN 60076-14:2013 - 2 -
The text of document 14/755/FDIS, future edition 1 of IEC 60076-14, prepared by IEC/TC 14 "Power
transformers" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60076-14:2013.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2014-07-21
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2016-10-21
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60076-14:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60076-4 NOTE Harmonized in EN 60076-4.
IEC 60216-1 NOTE Harmonized as EN 60216-1.
IEC 60317 NOTE Harmonized in EN 60317 series.
IEC 60422 NOTE Harmonized as EN 60422.
IEC 60505 NOTE Harmonized as EN 60505.
IEC 60567 NOTE Harmonized as EN 60567.
IEC 60599 NOTE Harmonized as EN 60599.
IEC 60641-3 NOTE Harmonized in EN 60641-3 series.
IEC 60674-3 NOTE Harmonized in EN 60674-3 series.
IEC 60819-3 NOTE Harmonized in EN 60819-3 series.
IEC 60851-4 NOTE Harmonized as EN 60851-4.
IEC 60867 NOTE Harmonized as EN 60867.
IEC 60893-3 NOTE Harmonized in EN 60893-3 series.

---------------------- Page: 4 ----------------------

SIST EN 60076-14:2014
- 3 - EN 60076-14:2013
IEC 60970 NOTE Harmonized as EN 60970.
IEC 61039 NOTE Harmonized as EN 61039.
IEC 61100 NOTE Harmonized as EN 61100.
IEC 61203 NOTE Harmonized as EN 61203.

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.