SPD application in conjunction with Class II equipment

In addition to CLC/TS 61643-12, this Technical Report describes the principle of erecting SPDs to be connected to 50 Hz a.c. power circuits, rated up to 1 000 V r.m.s. in conjunction with Class II equipments. In addition to EN 61643-11, this Technical Report gives specific guidance for SPDs intended to be installed in class II equipments.

SPD Anwendungen in Verbindung mit Schutzklasse II

Parafoudres destinés à être utilisés avec des équipements classe II

Uporaba SPD v povezavi z opremo razreda II

Poleg standarda EN 61643-12 to tehnično poročilo opisuje način postavljanja prenapetostnih zaščitnih naprav (SPD) za priključitev na električne tokokroge z napetostjo 50 Hz pri izmeničnem toku z nazivno vrednostjo do 1000 V efektivne izmenične napetosti v povezavi z opremo razreda II. Poleg standarda EN 61643-11 to tehnično poročilo obravnava specifične smernice za prenapetostne zaščitne naprave, namenjene za vgradnjo v opremo razreda II.

General Information

Status
Published
Publication Date
03-Mar-2016
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
21-Dec-2022

Buy Standard

Technical report
TP CLC/TR 50656:2016 - BARVE
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CLC/TR 50656:2016
01-april-2016
Uporaba SPD v povezavi z opremo razreda II
SPD application in conjunction with Class II equipment
SPD Anwendungen in Verbindung mit Schutzklasse II
Parafoudres destinés à être utilisés avec des équipements classe II
Ta slovenski standard je istoveten z: CLC/TR 50656:2016
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST-TP CLC/TR 50656:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CLC/TR 50656:2016

---------------------- Page: 2 ----------------------

SIST-TP CLC/TR 50656:2016


TECHNICAL REPORT CLC/TR 50656

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
March 2016
ICS 29.120.50

English Version
SPD application in conjunction with Class II equipment
Parafoudres destinés à être utilisés avec des équipements SPD Anwendungen in Verbindung mit Schutzklasse II
classe II


This Technical Report was approved by CENELEC on 2015-12-14.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC/TR 50656:2016 E

---------------------- Page: 3 ----------------------

SIST-TP CLC/TR 50656:2016
CLC/TR 50656:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
3.1 SPD assembly one SPD or a set of SPDs, in both case including all SPD disconnectors
required by the SPD manufacturer, providing the required overvoltage protection for a
type of system earthing . 5
3.2 extraneous conductive part conductive part not forming part of the electrical installation
and liable to introduce an electric potential, generally the electric potential of a local earth . 5
3.3 functional earth . 5
3.4 class II SPD . 6
3.5 protective earthing. 6
3.6 protective conductor . 6
3.7 protective earthing conductor . 6
4 SPDs connected to PE for the protection of Class II equipments . 6
4.1 General . 6
4.2 TN System . 8
4.3 TT System . 9
4.4 IT System . 10
4.5 Example of lighting pole surge protection connected to PE .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.