iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 123800:1996

(Main)

Sectional Specification: Flexible multilayer printed boards with through connections

Sectional Specification: Flexible multilayer printed boards with through connections

This document is a Sectional Specification (SS) relating to flexible multilayer printed boards with through connectors irrespective of their method of manufacture, when they are ready for the mounting of the components. It defines the characteristics to be assessed and the test methods to be used for capability approval tessting and for quality conformance inspection (lot-by-lot and periodic inspection).

Rahmenspezifikation: Flexible Mehrlagen-Leiterplatten mit Durchverbindungen

Spécification intermédiaire: Cartes imprimées multicouches souples avec connexions transversales

Le présent document est une Spécification intermédiaire (SS) qui concerne les cartes imprimées multicouches souples avec connexions transversales indépendamment de leur procédé de fabrication, lorsqu'elles sont prêtes pour le montage des composants. Il définit les caractéristiques à évaluer et les méthodes d'essais à utiliser pour les essais d'agrément de savoir-faire et le contrôle de conformité de la qualité (contrôle lot par lot et contrôle périodique).

Sectional Specification: Flexible multilayer printed boards with through connections

General Information

Status
Withdrawn
Publication Date
17-Dec-1996
ICS
31.180 - Printed circuits and boards
Technical Committee
CLC/SR 91 - Electronics assembly technology
Drafting Committee
IEC/TC 91 - IEC_TC_91
Parallel Committee
IEC/TC 52 - IEC_TC_52
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Sep-2017
Ref Project
SIST EN 123800:2001 - Sectional Specification: Flexible multilayer printed boards with through connections

Buy Standard

EN 123800:2001EN 123800:2001
PreviousNext
Standard
EN 123800:2001
English language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sectional Specification: Flexible multilayer printed boards with through connectionsRahmenspezifikation: Flexible Mehrlagen-Leiterplatten mit DurchverbindungenSpécification intermédiaire: Cartes imprimées multicouches souples avec connexions transversalesSectional Specification: Flexible multilayer printed boards with through connections31.180SORãþHPrinted circuits and boardsICS:Ta slovenski standard je istoveten z:EN 123800:1996SIST EN 123800:2001en01-marec-2001SIST EN 123800:2001SLOVENSKI
STANDARD



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 123800:2001



SIST EN 1238
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61189-2-720:2024(Main)
Test methods for electrical materials, circuit boards and other interconnection structures and assemblies - Part 2-720: Detection of defects in interconnection structures by measurement of capacitance
kSIST prEN IEC 61189-2-720:2024

IEC 61189-2-720:2024 provides a method to evaluate specific characteristics of circuit boards by measuring the capacitance between conductor traces and a ground plane and can be used for qualitative comparison of a test specimen to a reference board. This method is not intended for quantitative measurements and for assessment of conformity to a specification.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63251:2023(Main)
Test method for mechanical properties of flexible opto-electric circuit boards under thermal stress
SIST EN IEC 63251:2024

This International Standard defines the thermal endurance test methods for reliability assessment of flexible opto-electric circuit boards. The purpose of this standard is to accommodate the uniform thermal characteristics required by the flexible opto-electric circuit in high temperature environments such as automobiles. In particular, this standard specifies a test method to inspect the occurrence of color exchange, deformation and delamination of flexible opto-electric circuit boards under thermal stress.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61189-2-804:2023(Main)
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-804: Test methods for time to delamination - T260, T288, T300
SIST EN IEC 61189-2-804:2023

This International Standard specifies a test method to determine the time to delamination of base materials and printed boards using a thermomechanical analyzer (TMA). Temperatures used for this evaluation are typically 260 °C, 288 °C and 300 ºC, but are not limited to these values.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61189-2-801:2023(Main)
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
SIST EN IEC 61189-2-801:2023

This International Standard specifies a test method to be followed for Thermal Performance via carbon ink heating. The method employs a screened-on pattern of carbon ink used to determine the thermal performance of a dielectric layer on a metal base plate.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61189-2-803:2023(Main)
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-803: Test methods for Z-axis expansion of base materials and printed boards
SIST EN IEC 61189-2-803:2023

This International Standard specifies a test method to determine the Z-Axis Expansion of base materials and printed boards using a thermomechanical analyser (TMA).

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61249-6-3:2023(Main)
Materials for printed boards and other interconnecting structures - Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from "E" glass for printed boards
SIST EN IEC 61249-6-3:2024

This International Standard covers finished fabrics woven from ‘‘E’’ glass electrical grade glass fibre yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. This specification determines the nomenclature, definitions, general and chemical requirements for the glass, and physical requirements for finished woven glass fibre fabrics. Annex A of this standard provides a style designator for each finished fabric glass style, with specifications on yarn, fabric count, thickness and weight in both SI and US system.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61249-2-51:2023(Main)
Materials for printed boards and other interconnecting structures - Part 2-51: Reinforced base materials, clad and unclad - Base materials for integrated circuit card carrier tape, unclad
SIST EN IEC 61249-2-51:2023

IEC 61249-2-51:2023 specifies the construction, materials, property requirements, quality assurance, packaging, marking, storage of base materials for integrated circuit card carrier tape, unclad (hereinafter referred to as IC carrier tape base materials). This document is applicable to IC carrier tape base materials, which is a glue-coated material, one side is woven E-glass reinforced epoxy underlayer, and the other side is coated with adhesive and protected by release film.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61189-2-501:2022(Main)
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of resilience strength and resilience strength retention factor of flexible dielectric materials
SIST EN IEC 61189-2-501:2022

This part of IEC 61189 establishes a method suitable for testing the softness of FCCL (Flexible Copper Clad Laminate) products and related materials. This method determines the resilience under specified conditions. The test is performed on the sample as manufactured and without conditioning. The test does not apply to the resilience force lower than 10 mN.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61189-2-807:2021(Main)
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-807: Test methods for materials for interconnection structures - Decomposition temperature (Td) using TGA
SIST EN IEC 61189-2-807:2021

IEC 61189-2-807:2021 specifies a test method to determine the decomposition temperature (Td) of base laminate materials using thermogravimetric analysis (TGA).

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62878-2-602:2021(Main)
Device embedding assembly technology - Part 2-602: Guideline for stacked electronic module - Evaluation method of inter-module electrical connectivity
SIST EN IEC 62878-2-602:2021

IEC 62878-2-602:2021 specifies the requirements and evaluation methods of electrical connectivity. It is applicable to stacked electronic modules.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day